Microreactor Technology and Process Intensification

2005 ◽  
Keyword(s):  
Process Intensification ◽  
Microreactor Technology

The Chemical Decontamination Process Intensification, using Ultrasounds

2008 ◽  
Vol 59 (9) ◽  
Author(s):  
Eugenia Pantru ◽  
Gheorghit Jinescu ◽  
Rozalia R�dulescu ◽  
Antoneta Filcenco Olteanu ◽  
Cosmin Jinescu
Keyword(s):  
Chemical Composition ◽  
Process Intensification ◽  
Sulphuric Acid Solution ◽  
Liquid Ratio ◽  
Polluted Soils ◽  
Chemical Decontamination ◽  
First Case ◽  
Ultrasound Field ◽  
Different Types ◽  
Main Factors

This paper presents an intensive procedure used for the decontamination of the soils, which were radioactively contaminated by uranium, due to the occurrence of some antropic accidents, in order to limit the area�s pollution. The procedure used for the chemical decontamination of the polluted soils was the washing one and the decontamination degree is comparatively presented depending on the ultrasounds� presence and absence. The lab testes were performed on five types of soils , which were characterized from the granulometric, structural and chemical composition viewpoint, all these aspects represent the main factors, which determine the applied decontamination procedure�s limits and performances correlated with its utilization costs. The decontamination procedure�s kinetics for each type of soils was analyzed, using successively three different types of reagents (water, 0.1 M sulphuric acid solution and chloro-sodic solution � 100 g/L sodium chloride + 10 g/L sodium carbonate in water) for a solid to liquid ratio of 1:2, during 2 h, at a temperature of 20oC in a mechanic stirring system respectively in ultrasounds field. It was observed that the decontamination degree increases with up to 15-20% in case of the ultrasound field utilization comparing to the first case.

scholarly journals Modeling the Excess Velocity of Low-Viscous Taylor Droplets in Square Microchannels

Fluids ◽  
2019 ◽  
Vol 4 (3) ◽  
pp. 162 ◽  
Author(s):  
Thorben Helmers ◽  
Philip Kemper ◽  
Jorg Thöming ◽  
Ulrich Mießner
Keyword(s):  
High Speed ◽  
Process Intensification ◽  
Continuous Phase ◽  
Channel Cross Section ◽  
Optimization Approach ◽  
Mean Flow ◽  
Bypass Flow ◽  
Wall Film ◽  
Proposed Model ◽  
The Mean

Microscopic multiphase flows have gained broad interest due to their capability to transfer processes into new operational windows and achieving significant process intensification. However, the hydrodynamic behavior of Taylor droplets is not yet entirely understood. In this work, we introduce a model to determine the excess velocity of Taylor droplets in square microchannels. This velocity difference between the droplet and the total superficial velocity of the flow has a direct influence on the droplet residence time and is linked to the pressure drop. Since the droplet does not occupy the entire channel cross-section, it enables the continuous phase to bypass the droplet through the corners. A consideration of the continuity equation generally relates the excess velocity to the mean flow velocity. We base the quantification of the bypass flow on a correlation for the droplet cap deformation from its static shape. The cap deformation reveals the forces of the flowing liquids exerted onto the interface and allows estimating the local driving pressure gradient for the bypass flow. The characterizing parameters are identified as the bypass length, the wall film thickness, the viscosity ratio between both phases and the C a number. The proposed model is adapted with a stochastic, metaheuristic optimization approach based on genetic algorithms. In addition, our model was successfully verified with high-speed camera measurements and published empirical data.

Sign in / Sign up

Export Citation Format

Share Document