Improving Oxygen Delignification with Peroxymonosulphate: Fundamentals

2001 ◽  
pp. 149-162 ◽  
Author(s):  
Jean Bouchard ◽  
Richard Berry ◽  
Vince Magnotta
Keyword(s):  
Oxygen Delignification

Bleaching ability of pre-hydrolyzed pulps in the context of a biorefinery mill

TAPPI Journal ◽  
2013 ◽  
Vol 12 (11) ◽  
pp. 49-53 ◽  
Author(s):  
CHRISTINE CHIRAT ◽  
LUCIE BOIRON ◽  
DOMINIQUE LACHENAL
Keyword(s):  
Carbon Content ◽  
Acid Hydrolysis ◽  
13C Nmr ◽  
Kraft Lignin ◽  
Kappa Number ◽  
Hydroxyl Groups ◽  
Kraft Pulps ◽  
Quaternary Carbon ◽  
Oxygen Delignification

Autohydrolysis and acid hydrolysis treatments were applied on mixed softwood chips. The cooking ability was studied by varying the alkali and duration of the cook. Pulps with kappa numbers varying from 30 to 70 were obtained. The bleaching ability of these pulps was studied and compared to control kraft pulps. The prehydrolyzed pulps were shown to be more efficiently delignified by oxygen than the control kraft pulps starting from the same kappa number. Furthermore, the final bleaching was also easier for these pulps. It was also shown that extensive oxygen delignification applied on high-kappa pre-hydrolyzed pulps could be a way to improve the overall yield, which is a prerequisite for the development of such biorefinery concepts. Lignin was isolated from the control kraft and the two pre-hydrolyzed kraft pulps and analyzed by 13C NMR. Lignins from pre-hydrolyzed kraft pulps had similar free phenolic groups content to the control kraft lignin, but their aliphatic hydroxyl groups and β-O-4 content were lower than for the control lignin. The quaternary carbon content was the same for all the samples.

Commissioning brownstock washing controls for an evaporator limited mill

TAPPI Journal ◽  
2016 ◽  
Vol 15 (7) ◽  
pp. 459-464
Author(s):  
RICARDO SANTOS ◽  
PETER HART
Keyword(s):  
Control System ◽  
Negative Impact ◽  
Black Liquor ◽  
Pulp Mill ◽  
Control Program ◽  
Separation Point ◽  
Water Control ◽  
Oxygen Delignification ◽  
Percentage Points

An automated shower water control system has been implemented to reduce the volume and variability of weak black liquor being sent from the pulp mill to the evaporators. The washing controls attempt to balance the need for consistent and low soda carryover to the bleach plant with consistently high weak black liquor solids being sent to the evaporators. The washer controls were implemented on two bleachable grade hardwood lines (one with oxygen delignification, one without oxygen delignification) and one pine line. Implementation of the control program resulted in an increase in black liquor solids of 0.6 percentage points for the hardwood lines. Significant foam reduction was realized on the pine line since the pine black liquor solids were able to be consistently maintained just below the soap separation point. Low black liquor solids excursions to the evaporators were eliminated. Bleach plant carryover was stabilized and no negative impact on chemical consumption was noticed when controlling weak black liquor solids to recovery.

A comparative study of the impact of the cooking process on oxygen delignification

2003 ◽  
Vol 18 (4) ◽  
pp. 388-394 ◽  
Author(s):  
Stefan Antonsson ◽  
Mikael E. Lindstrom ◽  
Martin Ragnar
Keyword(s):  
Comparative Study ◽  
Oxygen Delignification ◽  
Cooking Process ◽  
The Impact

Deep eutectic solvent delignification: Impact of initial lignin

BioResources ◽  
2017 ◽  
Vol 12 (4) ◽  
pp. 7301-7310
Author(s):  
Veronika Majová ◽  
Silvia Horanová ◽  
Andrea Škulcová ◽  
Jozef Šima ◽  
Michal Jablonský
Keyword(s):  
Lactic Acid ◽  
Oxalic Acid ◽  
Lignin Content ◽  
Choline Chloride ◽  
Deep Eutectic Solvent ◽  
Deep Eutectic Solvents ◽  
Kappa Number ◽  
Kraft Pulps ◽  
Oxygen Delignification ◽  
Detailed Understanding

This study aimed to resolve the issue of the lack of detailed understanding of the effect of initial lignin content in hardwood kraft pulps on pulp delignification by deep eutectic solvents. The authors used Kappa number of the concerned pulp, intrinsic viscosity, and selectivity and efficiency of delignification as the parameters of the effect. The pulp (50 g oven dry pulp) was treated with four different DESs systems based on choline chloride with lactic acid (1:9), oxalic acid (1:1), malic acid (1:1), and system alanine:lactic acid (1:9); the results were compared to those reached by oxygen delignification. The results showed that the pulp with a higher initial lignin content had a greater fraction of easily removed lignin fragments.

Pulp mill process closure: a review of global technology developments and mill experiences in the 1990s

2004 ◽  
Vol 50 (3) ◽  
pp. 183-194 ◽  
Author(s):  
S.C. Stratton ◽  
P.L. Gleadow ◽  
A.P. Johnson
Keyword(s):  
Manufacturing Industry ◽  
Pollution Prevention ◽  
Optimal Solution ◽  
Pulp Mill ◽  
Thermomechanical Pulp ◽  
Pulp Mills ◽  
Oxygen Delignification ◽  
Manufacturing Operations ◽  
The Impact ◽  
Mill Process

The impact of effluent discharges continues to be an important issue for the pulp manufacturing industry. Considerable progress has been made in pollution prevention to minimize waste generation, so-called manufacturing “process closure.” Since the mid-1980s many important technologies have been developed and implemented, many of these in response to organochlorine concerns. Zero effluent operation is now a reality for a few bleached chemi-thermomechanical pulp (BCTMP) pulp mills. In kraft pulp manufacturing, important developments include widespread adoption of new cooking techniques, oxygen delignification, closed screening, improved process control, new bleaching methods, and systems that minimize pulping liquor losses. Coupled to this is a commitment to reduce water use and maximize reuse of in-mill process streams. Some companies pursued bleach plant closure, and many have been successful in eliminating a portion of their bleaching wastewaters. However, the difficulties inherent in closing bleach plants are considerable. For many mills the optimal solution has been found to be a high degree of closure coupled with external biological treatment of the remaining process effluent. No bleach plants at papergrade bleached kraft mills are known to be operating effluent-free on a continuous basis. This paper reviews the important worldwide technological developments and mill experiences in the 1990s that were focused on minimizing environmental impacts of pulp manufacturing operations.

scholarly journals Deposition of xylan isolated from Pennisetum purpureum on fibres of Eucalyptus globulus and characterisation of the composition of the surface xylans by immunolabelling and enzymatic peeling

Holzforschung ◽  
2018 ◽  
Vol 72 (11) ◽  
pp. 915-922 ◽  
Author(s):  
Tarja Tamminen ◽  
Atte Mikkelson ◽  
Matti Siika-aho ◽  
Kristiina Kruus ◽  
Jaakko Pere ◽  
...  
Keyword(s):  
Eucalyptus Globulus ◽  
Potential Method ◽  
Pennisetum Purpureum ◽  
Composition Gradient ◽  
Elephant Grass ◽  
Oxygen Delignification ◽  
High Quality ◽  
Enzymatic Peeling ◽  
Cold Caustic Extraction ◽  
Hydrolysis Of

AbstractAdsorption of xylan on pulp is a potential method to improve its properties, especially refinability for high quality printing and writing (P&W) paper grades. In this study, elephant grass [Pennisetum purpureum(Schumach.)] xylan was used for this purpose. The xylan was extracted using cold caustic extraction (CCE) fromP. purpureumbrown pulp, produced by the Soda-AQ process (kappa 20). Xylan resorption was accomplished during the oxygen delignification phase of eucalypt [Eucalyptus globulus(Labill.)] pulp to avoid problems induced by the colour of the lignin-contaminated deposited xylan. Immunolabelling and enzymatic peeling methodologies were compared for the analysis of the spatial distribution of xylan in the fibre wall. The labelling appeared unevenly as faint and brighter patches on fibre surfaces. Increased labelling of xylan was detected on the samples with precipitatedP. purpureumxylan. The enzymatic peeling method using a total hydrolysis enzyme mixture yielded a composition gradient as a function of time, showing clear xylose (Xyl) enrichment in the very beginning of the reaction, reflecting hydrolysis of fibre surfaces. Pure xylanase and endoglucanase hydrolyses yielded different product patterns and kinetics compared to total hydrolysis, but interpretation of those results in terms of xylan localisation was not straightforward.

Sign in / Sign up

Export Citation Format

Share Document