scholarly journals Thermal Conversion of Solid Wastes and Biomass

Author(s):  
Shigeyoshi Takaoka ◽  
A. G. Buekens ◽  
Masakatsu Hiraoka ◽  
Ralph Overend
2020 ◽  
Vol 12 (15) ◽  
pp. 6081 ◽  
Author(s):  
Evan A.N. Marks ◽  
Vasiliki Kinigopoulou ◽  
Hanene Akrout ◽  
Ahmed Amine Azzaz ◽  
Charalampos Doulgeris ◽  
...  

Olive mill wastes continue to be a management challenge due to the large volumes produced, particularly due to their toxicity and impacts on the environment. Thermal conversion through pyrolysis or hydrothermal carbonization techniques can detoxify wastes while conserving nutrient contents. In this work, we produced up-to-date data on olive mill waste flows in Spain, Tunisia, and Greece and characterized representative samples in the laboratory. Assays of thermal conversion of olive mill wastewaters and solid wastes were also performed to understand biochar yields and final properties, and the total quantities of nutrients contained were estimated. Of particular note were the quantities of potassium in Tunisian wastewaters, representing 0.6% of the total mass and an annual flow of approximately 5000 t, and in the Spanish solid wastes, an average of 1.7% of the total mass is potassium, representing an annual flow of approximately 23,000 t. Concerning phosphorus, Spanish solid wastes had the highest contents (0.1%), double that of other countries’ wastes. Annually, olive mill wastes from the three countries are estimated to contain approximately 35 × 103 tons of potassium and 2.6 × 103 tons of phosphorus. With this resource converted to biochar, each year more than 700 km2 of soils could be enriched in 0.2% carbon with biochar at an application rate of 7 t ha−1.


2015 ◽  
Vol 1 (1) ◽  
pp. 39-48
Author(s):  
Muzher Mahdi Ibrahem ◽  
Khalid Ahmed Salih
Keyword(s):  

2017 ◽  
Author(s):  
Shno Mustafa Ali ◽  
Younis Mustafa Ali ◽  
Mariwan Ridha Faris
Keyword(s):  

2020 ◽  
Vol 5 (4) ◽  
pp. 202-209
Author(s):  
Alexander Topal ◽  
◽  
Iryna Holenko ◽  
Luidmyla Haponych ◽  
◽  
...  

For the municipal solid waste (MSW) to be used in a proper way, it is necessary to implement clean technologies capable of thermal treatment of MSW and RDF in order to produce heat and electricity while meeting current ecological requirements. Nowadays, a number of technologies for MSW/RDF thermal treating are being used worldwide. Among them, the most proven technologies, applicable for industrial introduction, have been considered while analyzing their advantages/ disadvantages accounting for local conditions of Ukraine.


2020 ◽  
pp. 42-48
Author(s):  
Tatiana Safronova ◽  
◽  
Tatiana Shatalova ◽  
Snezhana Tikhonova ◽  
Yaroslav Filippov ◽  
...  

Powders of calcium pyrophosphate Ca2P2O7 in the form of γ- и β-modifications have been produced as a result of thermal conversion of brushite CaHPO4∙2H2O synthesized from phosphoric acid H3PO4 and calcium carbonate CaCO3 at the molar ratio P / Ca = 1.1. The resulting powders can be used for production of various functional materials including biocompatible and bioresorbable ones for the treatment of bone defects.


1992 ◽  
Vol 25 (7) ◽  
pp. 319-326 ◽  
Author(s):  
A. Wellinger ◽  
U. Baserga ◽  
K. Egger

Two new systems for the digestion of solid wastes at thermophilic temperatures were developped and are currently being investigated at our research institute. The first system (ANCOM) was designed to process straw-rich cattle manure with a natural dry matter content of 18% to 22%. First results demonstrated a good specific gas production of 1.2 m3 biogas per m3 digester volume and day (54% methane) corresponding to a gas yield of 400 l per kg VS. A second digester system was developed to treat fruit, garden and vegetable (FGV-) waste. Because FGV-waste tends to float, a stirred tank reactor was designed in cooperation with an engineering firm. The reactor includes a distinguished new stirring system taking up strong shear forces and a hydraulic feeding system which guarantees that even during recirculation of the material, the hygenized digested substrate leaving the digester is not brought in contact with the fresh incoming material. First results measured at an HRT of 40 days demonstrated a specific gas production of 2.7 m3 per m3 fermenter and day.


1997 ◽  
Vol 35 (8) ◽  
pp. 231-238 ◽  
Author(s):  
Tay Joo Hwa ◽  
S. Jeyaseelan

Conditioning of sludges improves dewatering characteristics and reduces the quantity of sludge to be handled. Anaerobic digested sludge collected from a sewage treatment plant contained 1.8% to 8% oil. The increase of specific resistance and capillary suction time (CST) with increasing oil content observed in these samples indicates the interference of oil in dewatering. It has been found that addition of municipal solid wastes incinerator fly ash decreases the specific resistances and capillary suction times of oily sludges rapidly up to 3% dosage. Beyond 3% fly ash, the decrease is less significant and the solids content in the sludge cake increases. This optimum dosage remains the same for sludges with varying oil contents from 1.8% to 12%. The total suspended solids of filtrate decreases with fly ash dosage but the toxic concentrations of heavy metals increases considerably. However at the optimum dosage of 3%, concentrations of heavy metals are within the limits for discharging into the sewers. The correlations of CST with the dewatering characteristics such as specific resistance, filter yield and corrected filter yield are established. These correlations can be used to obtain a quick prediction on dewaterability.


Sign in / Sign up

Export Citation Format

Share Document