Composite Films of Poly(3-hexylthiophene) Grafted Single-Walled Carbon Nanotubes for Electrochemical Detection of Metal Ions

2014 ◽  
Vol 6 (10) ◽  
pp. 7686-7694 ◽  
Author(s):  
Shaojun Yang ◽  
Dongli Meng ◽  
Jinhua Sun ◽  
Yan Huang ◽  
Yong Huang ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Metal Ions ◽  
Electrochemical Detection ◽  
Composite Films ◽  
Single Walled Carbon Nanotubes ◽  
Single Walled Carbon ◽  
Walled Carbon Nanotubes

scholarly journals Synthesis of silver nanoparticles embedded with single-walled carbon nanotubes for printable elastic electrodes and sensors with high stability

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jae-Won Lee ◽  
Joon Young Cho ◽  
Mi Jeong Kim ◽  
Jung Hoon Kim ◽  
Jong Hwan Park ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Silver Nanoparticles ◽  
High Performance ◽  
Composite Films ◽  
Single Walled Carbon Nanotubes ◽  
Gauge Factor ◽  
Time Interval ◽  
Single Walled Carbon ◽  
Irradiation Energy ◽  
Walled Carbon Nanotubes

AbstractSoft electronic devices that are bendable and stretchable require stretchable electric or electronic components. Nanostructured conducting materials or soft conducting polymers are one of the most promising fillers to achieve high performance and durability. Here, we report silver nanoparticles (AgNPs) embedded with single-walled carbon nanotubes (SWCNTs) synthesized in aqueous solutions at room temperature, using NaBH4 as a reducing agent in the presence of highly oxidized SWCNTs as efficient nucleation agents. Elastic composite films composed of the AgNPs-embedded SWCNTs, Ag flake, and polydimethylsiloxane are irradiated with radiation from a Xenon flash lamp within a time interval of one second for efficient sintering of conductive fillers. Under high irradiation energy, the stretchable electrodes are created with a maximum conductivity of 4,907 S cm−1 and a highly stretchable stability of over 10,000 cycles under a 20% strain. Moreover, under a low irradiation energy, strain sensors with a gauge factor of 76 under a 20% strain and 5.4 under a 5% strain are fabricated. For practical demonstration, the fabricated stretchable electrode and strain sensor are attached to a human finger for detecting the motions of the finger.

scholarly journals DNA Functionalized Single-Walled Carbon Nanotubes for Electrochemical Detection

2005 ◽  
Vol 109 (43) ◽  
pp. 20072-20076 ◽  
Author(s):  
Chenguo Hu ◽  
Yiyi Zhang ◽  
Gang Bao ◽  
Yuelan Zhang ◽  
Meilin Liu ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Electrochemical Detection ◽  
Single Walled Carbon Nanotubes ◽  
Single Walled Carbon ◽  
Walled Carbon Nanotubes

Enhancing the Thermoelectric Performance through the Mutual Interaction between Conjugated Polyelectrolytes and Single-walled Carbon Nanotubes

2022 ◽  
Author(s):  
Shuxun Wan ◽  
Zhongming Chen ◽  
Liping Hao ◽  
Shichao Wang ◽  
Benzhang Li ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Thermoelectric Properties ◽  
Thermoelectric Generator ◽  
Composite Films ◽  
Single Walled Carbon Nanotubes ◽  
Conjugated Polyelectrolytes ◽  
High Performing ◽  
Single Walled Carbon ◽  
Electrical Conductivities ◽  
Walled Carbon Nanotubes

Abstract We present a method of constructing composites composed of conjugated polyelectrolytes (CPEs) and single-walled carbon nanotubes (SWCNTs) to obtain a high-performing flexible thermoelectric generator. In this approach, three kinds of polymers, namely, poly[(1,4-(2,5-didodecyloxybenzene)-alt-2,5-thiophene] (P1), poly[(1,4-(2,5-bis-sodium butoxysulfonate-phenylene)-alt-2,5-thiophene] (P2), and poly[(1,4-(2,5-bis-acid butoxysulfonic-phenylene)-alt-2,5-thiophene] (P3) are designed, synthesized and complexed with SWCNTs as thermoelectric composites. The electrical conductivities of CPEs/SWCNTs (P2/SWCNTs, and P3/SWCNTs) nanocomposites are much higher than those of non-CPEs/SWCNTs (P1/SWCNTs) nanocomposites. Among them, the electrical conductivity of P2/SWCNTs with a ratio of 1:4 reaches 3686 S cm-1, which is 12.4 times that of P1/SWCNTs at the same SWCNT mass ratio. Moreover, CPEs/SWCNTs composites (P2/SWCNTs) display remarkably improved thermoelectric properties with the highest power factor (PF) of 163 μW m-1 K-2. In addition, a thermoelectric generator is fabricated with P2/SWCNTs composite films, and the output power and power density of this generator reach 1.37 μW and 1.4 W m-2 (cross-section) at ΔT=70 K. This result is over three times that of the thermoelectric generator composed of non-CPEs/SWCNTs composite films (P1/SWCNTs, 0.37 μW). The remarkably improved electrical conductivities and thermoelectric properties of the CPEs/SWCNTs composites (P2/SWCNTs) are attributed to the enhanced interaction. This method for constructing CPEs/SWCNTs composites can be applied to produce thermoelectric materials and devices.

scholarly journals Preparation and Thermoelectric Properties of Semiconducting Single-Walled Carbon Nanotubes/Regioregular Poly(3-dodecylthiophene) Composite Films

Polymers ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 2720
Author(s):  
Mengdi Wang ◽  
Qin Yao ◽  
Sanyin Qu ◽  
Yanling Chen ◽  
Hui Li ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Transport Properties ◽  
Thermoelectric Properties ◽  
Composite Films ◽  
Single Walled Carbon Nanotubes ◽  
Dispersion Phase ◽  
Single Walled Carbon ◽  
Seebeck Coefficients ◽  
Regioregular Poly ◽  
Walled Carbon Nanotubes

Single-walled carbon nanotubes (SWNTs) have been widely used as leading additives for improving the thermoelectric properties of organic materials, due to their unique structure and excellent electronic transport properties. However, the as-synthesized SWNTs are mixtures (mix-SWNT) of semiconducting (sc-SWNT) and metallic (met-SWNT) carbon nanotubes. The significantly different surface character and transport behavior of sc-SWNT and met-SWNT frequently raise the difficulty of modifying microstructures, and tuning transport properties of SWNTs/organic composites, when using mix-SWNTs as dispersion phase. Herein, we prepared high quality sc-SWNTs/rr-P3DDT composite film by presorting pure sc-SWNT from the raw mix-SWNTs using regioregular poly(3-dodecylthiophene) (rr-P3DDT). Both the smoothness and compactness of sc-SWNTs/rr-P3DDT are great improved, as compared with the mix-SWNTs/rr-P3DDT films, and the sc-SWNTs are well-dispersed and uniformly wrapped by rr-P3DDT with diameter less than 50 nm. The significantly enhanced Seebeck coefficients and power factors are obtained in the sc-SWNT/rr-P3DDT samples. As the result, the maximum power factor of 60 μW/mK2 in 50 wt% sc-SWNTs sample is 70% higher than that of mix-SWNTs/P3DDT sample. This work reveals the effectiveness of pure semiconductor SWNTs as fillers to optimize the thermoelectric properties of CNT/polymer nano-composites.

scholarly journals Aqueous electromigration of single-walled carbon nanotubes and co-electromigration with copper ions

Nanoscale ◽  
2018 ◽  
Vol 10 (41) ◽  
pp. 19628-19637 ◽  
Author(s):  
Pavan M. V. Raja ◽  
Gibran L. Esquenazi ◽  
Kourtney D. Wright ◽  
Cathren E. Gowenlock ◽  
Bruce E. Brinson ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Metal Ions ◽  
Functional Groups ◽  
Copper Ions ◽  
Single Walled Carbon Nanotubes ◽  
Surface Functional Groups ◽  
Single Walled Carbon ◽  
Walled Carbon Nanotubes

The direction of electromigration of SWCNTs in the absence of surfactant depends on the presence of catalyst residue, surface functional groups and adsorbed metal ions.

Sign in / Sign up

Export Citation Format

Share Document