Titania Nanocoating on MnCO3 Microspheres via Liquid-Phase Deposition for Fabrication of Template-Assisted Core–Shell- and Hollow-Structured Composites

2013 ◽  
Vol 6 (1) ◽  
pp. 57-64 ◽  
Author(s):  
Hack-Keun Lee ◽  
Daisuke Sakemi ◽  
Roman Selyanchyn ◽  
Cheal-Gyu Lee ◽  
Seung-Woo Lee
Keyword(s):  
Liquid Phase ◽  
Core Shell ◽  
Liquid Phase Deposition

Direct liquid phase deposition fabrication of waxberry-like magnetic Fe 3 O 4 @TiO 2 core-shell microspheres

2016 ◽  
Vol 181 ◽  
pp. 391-396 ◽  
Author(s):  
Jian Zheng ◽  
You Wu ◽  
Quanping Zhang ◽  
Yintao Li ◽  
Chengyang Wang ◽  
...  
Keyword(s):  
Liquid Phase ◽  
Core Shell ◽  
Liquid Phase Deposition

Control of the coating layer thickness of TiO2–SiO2 core–shell hybrid particles by liquid phase deposition

2011 ◽  
Vol 22 (3) ◽  
pp. 390-395 ◽  
Author(s):  
Tomoya Ohno ◽  
Kazunori Numakura ◽  
Hidenobu Itoh ◽  
Hisao Suzuki ◽  
Takeshi Matsuda
Keyword(s):  
Liquid Phase ◽  
Layer Thickness ◽  
Coating Layer ◽  
Core Shell ◽  
Liquid Phase Deposition ◽  
Hybrid Particles ◽  
Coating Layer Thickness

scholarly journals 1D core–shell magnetoelectric nanocomposites by template-assisted liquid phase deposition

CrystEngComm ◽  
2017 ◽  
Vol 19 (15) ◽  
pp. 2079-2088 ◽  
Author(s):  
Amin Yourdkhani ◽  
Daniela Caruntu ◽  
Melvin Vopson ◽  
Gabriel Caruntu
Keyword(s):  
Liquid Phase ◽  
Core Shell ◽  
Liquid Phase Deposition

Photoelectrochemical Properties of Anatase TiO2 Films Prepared by Improved Liquid Phase Deposition

2015 ◽  
Vol 1120-1121 ◽  
pp. 419-423
Author(s):  
Cai Xia Lei ◽  
X.L. Jiang ◽  
Y. Liu ◽  
X. Liu ◽  
Y.T. Ma ◽  
...  
Keyword(s):  
Electron Microscope ◽  
Liquid Phase ◽  
Scanning Electron Microscope ◽  
Reaction Temperature ◽  
White Light ◽  
Photoelectrochemical Properties ◽  
Liquid Phase Deposition ◽  
X Ray ◽  
Good Crystallinity ◽  
Scanning Electron

In this paper, the hydrothermal-assisted liquid phase deposition (HT-LPD) method has been developed to prepare TiO2 films. The crystalline structures and morphologies of as-prepared TiO2 films were analyzed using an X-ray diffractometer (XRD) and scanning electron microscope (SEM). It was found that the HT-LPD TiO2 film showed good crystallinity with preferrred orientation along c-axis. Moreover, the as-prepared TiO2 films consisted of two layers, with the tiny nanoparticles as the underlying layer and the flower-like clusters as the upper layer. The photoelectrochemical measurements revealed that, when illuminated by the white light, the HT-LPD TiO2 films exhibited a more negative photopotential value and an increased photocurrent value with elevated reaction temperature, excepting for the sample prerared at 150 °C. In summary, the TiO2 films prepared by the improved LPD method could be served as the promising photoanode for the photoelectrochemical applications.

SrTiO3 Functional Ceramics Thin Film Prepared by Self-Assembled Monolayers with the Liquid Phase Deposition Method on Silicon Substrates

2010 ◽  
Vol 105-106 ◽  
pp. 270-273
Author(s):  
Hui Jun Ren ◽  
Guo Qiang Tan ◽  
Hong Yan Miao ◽  
Ya Yu Song ◽  
Ao Xia
Keyword(s):  
Thin Film ◽  
Contact Angle ◽  
Liquid Phase ◽  
Deposition Temperature ◽  
Precursor Solution ◽  
Self Assembled Monolayers ◽  
Silicon Substrates ◽  
Liquid Phase Deposition ◽  
Assembled Monolayers ◽  
Surface Contact Angle

In this article, (NH4)2TiF6, SrNO3 and H3BO3 were used as raw materials to prepare the precursor solution with the ratio of AHFT/SN/BA=1:1:3. The thin films of SrTiO3 were fabricated on the functional silicon substrates (100) by self-assembled monolayers (SAMs) with the liquid phase deposition (LPD). This article also studied the effects of wet state and the deposition temperature of the precursor solution before and after the functionalization of silicon substrate on the thin film growth. The results indicated that after the immersion in OTS for 30min, the surface contact angle of the silicon substrate changed from 24.64° to 100.91°. The substrate appeared hydrophobic property and it was irradiated by UV light for 30min. Then the surface contact angle of the substrate decreased to 5.00°. The substrate appeared hydrophilicity. The concentration of the precursor solution was 0.025 mol/L, the deposition temperature was 40°C and the deposition time was 9h, which were all helpful to SrTiO3 crystallization. XRD and SEM were used to characterize the physical phase of thin film and surface morphology at 600 °C with annealing and heat retaining for 2h. The results indicated that the thin film prepared by the mono-crystal Si substrate was SrTiO3 thin film with better crystalline. On the crystal surfaces of (110), (100), (200) and (211), there appeared the obvious diffraction peaks. The SrTiO3 grains on the surface had the clear outline and were regular and long columnar crystals.

Liquid phase deposition of iron and cobalt doped TiO2 epitaxial thin films

2008 ◽  
Vol 205 (10) ◽  
pp. 2405-2408 ◽  
Author(s):  
K. Y. S. Chan ◽  
G. K. L. Goh ◽  
M. Y. Han
Keyword(s):  
Thin Films ◽  
Liquid Phase ◽  
Epitaxial Thin Films ◽  
Liquid Phase Deposition ◽  
Doped Tio2
Sign in / Sign up

Export Citation Format

Share Document