scholarly journals Photocatalytic Simultaneous Removal of Nitrite and Ammonia via a Zinc Ferrite/Activated Carbon Hybrid Catalyst under UV–Visible Irradiation

ACS Omega ◽  
2019 ◽  
Vol 4 (4) ◽  
pp. 6411-6420 ◽  
Author(s):  
Jia Ye ◽  
Shou-Qing Liu ◽  
Wen-Xiao Liu ◽  
Ze-Da Meng ◽  
Li Luo ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Zinc Ferrite ◽  
Simultaneous Removal ◽  
Hybrid Catalyst ◽  
Visible Irradiation ◽  
Uv Visible

Synthesis and properties of a sterically encumbered poly(thienylene vinylene): poly[E-1,2-(4,4prime-dihexyl-2,2prime-dithienyl)ethylene]

1998 ◽  
Vol 76 (11) ◽  
pp. 1524-1529
Author(s):  
Jimmy Lowe ◽  
Carl Bartels ◽  
Steven Holdcroft
Keyword(s):  
Ftir Spectroscopy ◽  
Electrically Conducting ◽  
H Nmr ◽  
Visible Photoluminescence ◽  
Micron Size ◽  
Visible Irradiation ◽  
Uv Visible ◽  
The Stability ◽  
Doped Polymer ◽  
Polythiophene Derivative

Electrically conducting poly[E-1,2-(4,4prime-dihexyl-2,2prime-dithienyl)ethylene] was synthesized and structurally characterized by UV-visible, 1H NMR, and FTIR spectroscopy. The head-to-head arrangement of the alkylthiophene dyads directly affects the UV-visible, photoluminescence, and electroluminescence maxima of the polymer. The conductivity of the doped polymer was measured to be ~2 S cm-1 and the stability of the oxidized polymer possessing various dopants was compared. UV-visible irradiation of PDHDTE rendered the films insoluble and photolithography was used to produce micron-size images. FTIR was used to monitor the photoproducts during photolysis of PDHDTE. Mechanisms of photooxidation were proposed, based on the photoproducts observed.Key words: polythiophene derivative, head-to-head dyad, photolithography, photooxidation, electroluminescence.

Designing Soft Reactive Adhesives by Controlling Polymer Chemistry

MRS Bulletin ◽  
2003 ◽  
Vol 28 (6) ◽  
pp. 424-427 ◽  
Author(s):  
Agnès Aymonier ◽  
Eric Papon
Keyword(s):  
Automotive Industry ◽  
Ease Of Use ◽  
Large Strains ◽  
Structural Adhesives ◽  
Wide Range ◽  
Step Growth ◽  
Visible Irradiation ◽  
Step Growth Polymerization ◽  
Uv Visible ◽  
Activation Heat

AbstractSoft reactive adhesives (SRAs) are polymer-based materials (e.g., polyurethanes, polysiloxanes, polydienes) designed to be further vulcanized or slightly cross-linked through external activation (heat, moisture, oxygen, UV–visible irradiation, etc.), either at the time of their application or within a subsequent predefined period. They are used mainly as mastics, or sealing compounds, in a wide range of industrial and commercial fields such as construction, footwear, and the automotive industry. Generally deposited as thick films, SRAs behave as structural adhesives; their low elastic moduli accommodate large strains between the bonded parts without incurring permanent damage. Other outstanding attributes of SRAs are their resistance to solvents, their ability to withstand aggressive environments, and their ease of use. This article discusses examples of SRAs and, more specifically, shows how the cross-linking chemistry, mainly through step-growth polymerization, provides their primary advantages.

Photodegradation of cyprodinil under UV-visible irradiation - chemical and toxicological approaches

2016 ◽  
Vol 30 (19) ◽  
pp. 2201-2211 ◽  
Author(s):  
Edith Nicol ◽  
Houda Chayata ◽  
Christophe Genty ◽  
Stéphane Bouchonnet ◽  
Sophie Bourcier
Keyword(s):  
Visible Irradiation ◽  
Uv Visible

scholarly journals Synthesis and Photoactivity of Fe3O4/TiO2-Co as a Magnetically Separable Visible Light Responsive Photocatalyst

2018 ◽  
Vol 18 (3) ◽  
pp. 403 ◽  
Author(s):  
Eko Sri Kunarti ◽  
Indriana Kartini ◽  
Akhmad Syoufian ◽  
Karolina Martha Widyandari
Keyword(s):  
Methylene Blue ◽  
Visible Light ◽  
Dopant Concentration ◽  
Band Gap Energy ◽  
Methylene Blue Solution ◽  
Magnetic Photocatalyst ◽  
Blue Solution ◽  
Degradation Reaction ◽  
Visible Irradiation ◽  
Uv Visible

Synthesis of magnetic photocatalyst, Fe3O4/TiO2-Co, with characterization and photoactivity examination have been conducted. The synthesis was initiated by preparation of Fe3O4 particles using coprecipitation method. The Fe3O4 particles were then coated with TiO2-Co at a various ratio of Fe3O4:TiO2 and concentration of Co(II) dopant. The Fe3O4/TiO2-Co was characterized by FTIR, XRD, TEM, SEM-EDX, VSM, and SR UV-visible methods. Photoactivity of the Fe3O4/TiO2-Co was carried out using methylene blue as a target molecule in degradation reaction within a batch system. By using optimum conditions, the degradation of methylene blue solution was performed under exposure to UV, visible light and dark condition. Results showed that the Fe3O4/TiO2-Co formation was confirmed by the presence of Fe3O4 and anatase diffraction peaks in the X-ray diffractogram. SR UV-Vis spectra indicated that the Fe3O4/TiO2-Co was responsive to visible light. Band gap energy of the Fe3O4/TiO2-Co with dopant concentration of 1; 5; 10 and 15% were 3.22; 3.12; 3.09 and 2.81 eV, respectively. The methylene blue solution can be well photodegraded at a pH of 10 for 210 min. The Fe3O4/TiO2-Co has the highest ability to methylene blue photodegradation with dopant concentration of 10% gave degradation yield of 80.51 and 95.38% under UV and visible irradiation, respectively.

Sign in / Sign up

Export Citation Format

Share Document