scholarly journals Research on Combustion Properties and Pollutant Emission Characteristics of Blends of Maltol Byproduct/Pine Sawdust

ACS Omega ◽  
2021 ◽  
Author(s):  
Yang Liu ◽  
Yungang Wang ◽  
Yanjun Dai ◽  
Yanyuan Bai ◽  
Qinxin Zhao
Keyword(s):  
Pollutant Emission ◽  
Emission Characteristics ◽  
Pine Sawdust ◽  
Combustion Properties

A Method for the Rapid Characterization of Combustion Properties of Liquid Fuels Using a Tubular Burner

2007 ◽  
Author(s):  
N. D. Love ◽  
R. N. Parthasarathy ◽  
S. R. Gollahalli
Keyword(s):  
Liquid Fuel ◽  
High Sensitivity ◽  
Radiant Heat ◽  
Liquid Fuels ◽  
Pollutant Emission ◽  
Emission Characteristics ◽  
Air Stream ◽  
Combustion Properties ◽  
Rapid Characterization

Knowledge of the combustion and pollutant emission characteristics is important in the application of both existing and newly developed fuels. A technique for the rapid characterization of flame radiation properties and emission characteristics of liquid fuels was developed for this purpose. Liquid fuel was injected into a heated air stream at known rates with a syringe pump; the feed line was heated (temperature of 425°C) to pre-vaporize the fuel before burning, to avoid the effects of evaporation parameters on measurements. Temperatures of the fuel and air were monitored using K-type thermocouples embedded within the feed lines. A laminar methane-air flame was issued from a stainless steel tubular burner (9.5mm inner diameter) and used as the ignition source. The methane supply was shut off after the onset of the burning of the vaporized liquid fuel, in order to eliminate the effects of burning methane in the measurements. Several liquid fuels were tested, including commercially available petroleum-based No. 2 diesel fuel, canola methyl ester (CME B 100) biodiesel, kerosene, methanol, toluene, and selected alkanes. A steady burning flame was achieved for all fuels. Radiative heat flux measurements were made with a high-sensitivity pyrheliometer and the radiant fraction of heat release calculated. The radiant heat fraction served as an indication of sooting tendency of the fuels. NO, CO, and CO2 emission measurements were also made. The measurements demonstrate the feasibility of the current technique for the rapid characterization of combustion properties of liquid fuels, utilizing small fuel quantities.

Development and Testing of a FuelFlex Dry-Low-NOx Micromix Combustor for Industrial Gas Turbine Applications With Variable Hydrogen Methane Mixtures

2019 ◽  
Author(s):  
H. H.-W. Funke ◽  
N. Beckmann ◽  
S. Abanteriba
Keyword(s):  
Gas Turbine ◽  
Experimental Studies ◽  
Fuel Mixture ◽  
Combustion Efficiency ◽  
Pollutant Emission ◽  
Pure Hydrogen ◽  
Negative Effects ◽  
Low Emission ◽  
Combustion Properties ◽  
Fuel Mixtures

Abstract The negative effects on the earth’s climate make the reduction of the potent greenhouse gases carbon-dioxide (CO2) and nitrogen oxides (NOx) an imperative of the combustion research. Hydrogen based gas turbine systems are in the focus of the energy producing industry, due to their potential to eliminate CO2 emissions completely as combustion product, if the fuel is produced from renewable and sustainable energy sources. Due to the difference in the physical properties of hydrogen-rich fuel mixtures compared to common gas turbine fuels, well established combustion systems cannot be directly applied for Dry Low NOx (DLN) hydrogen combustion. The paper presents initial test data of a recently designed low emission Micromix combustor adapted to flexible fuel operation with variable fuel mixtures of hydrogen and methane. Based on previous studies, targeting low emission combustion of pure hydrogen and dual fuel operation with hydrogen and syngas (H2/CO 90/10 vol.%), a FuelFlex Micromix combustor for variable hydrogen methane mixtures has been developed. For facilitating the experimental low pressure testing the combustion chamber test rig is adapted for flexible fuel operation. A computer-controlled gas mixing facility is designed and installed to continuously provide accurate and homogeneous hydrogen methane fuel mixtures to the combustor. An evaluation of all major error sources has been conducted. In the presented experimental studies, the integration-optimized FuelFlex Micromix combustor geometry is tested at atmospheric pressure with hydrogen methane fuel mixtures ranging from 57 vol.% to 100 vol.% hydrogen in the fuel. For evaluating the combustion characteristics, the results of experimental exhaust gas analyses are applied. Despite the design compromise, that takes into account the significantly different fuel and combustion properties of the applied fuels, the initial results confirm promising operating behaviour, combustion efficiency and pollutant emission levels for flexible fuel operation. The investigated combustor module exceeds 99.4% combustion efficiency for hydrogen contents of 80–100% in the fuel mixture and shows NOx emissions less than 4 ppm corrected to 15 vol.% O2 at the design point.

Effect of Elliptical Burner Geometry on Stability and Global Emission Characteristics of Pre-Mixed Flames

2002 ◽  
Author(s):  
Benjamin D. Baird ◽  
S. R. Gollahalli
Keyword(s):  
Aspect Ratio ◽  
Emission Reduction ◽  
Pollutant Emission ◽  
Emission Characteristics ◽  
Global Emission ◽  
Harmful Emissions ◽  
Reduction Of Emissions ◽  
Fuel Mixtures ◽  
The Stability ◽  
Stability Results

An important topic in combustion research today is pollutant emission reduction. With the current demand for large amounts of economical, clean power, there is a need for research in both the increase of combustion performance and the reduction of emissions. Two methods of the so-called ‘passive’ flame controls are the use of premixing the air and fuel and the variation of the geometry of the flame. Both mechanisms offer the promise of increasing efficiency as well as reducing harmful emissions. However, the effect of these controls on the stability of the flame has not been fully studied. This paper will attempt to fill in some of this gap and will study the effects of elliptical burner geometry on premixed flames. The study will present stability results for circular and 4:1 aspect ratio elliptical burner geometry for a range of fuel mixtures of propane and hydrogen. The paper will also report the emission indices of CO and NO of the 40% by mass hydrogen in propane mixture. It was found that the 4:1 aspect ratio burner had reduced blow-out stability, produced a much shorter flame, and, in general, produced more carbon monoxide and less nitric oxide than a circular burner.

Sign in / Sign up

Export Citation Format

Share Document