Biomass-Based Activated Carbon and Activators: Preparation of Activated Carbon from Corncob by Chemical Activation with Biomass Pyrolysis Liquids

Activated carbon was prepared from molasses, which are natural precursors of vegetable origin resulting from the sugar industry. A simple elaboration process, based on chemical activation with phosphoric acid, was proposed. The final product, prepared by activation of molasses/phosphoric acid mixture in air at 500°C, presented high surface area (more than 1400 m2/g) and important maximum adsorption capacity for methylene blue (625 mg/g) and iodine (1660 mg/g). The activated carbon (MP2(500)) showed a good potential for the adsorption of Cr(VI), Cu(II) and Pb(II) from aqueous solutions. The affinity for the three ions was observed in the following order Cu2+ Cr6+ Pb2+. The process is governed by monolayer adsorption following the Langmuir model, with a correlation coefficient close to unity.

Download Full-text

Analisis Variasi Temperatur Aktivasi Terhadap Daya Serap Arang Aktif Tandan Aren (Arenga Pinnata Merr) Dengan Agen Aktivasi Potassium Silicate(K2SiO3)

Jurnal Penelitian Pendidikan Fisika ◽

10.36709/jipfi.v5i3.13803 ◽

2020 ◽

Vol 5 (3) ◽

pp. 221

Author(s):

Muhammad Azam ◽

Muhammad Anas ◽

Erniwati Erniwati

Keyword(s):

Methylene Blue ◽

Activated Carbon ◽

Adsorption Capacity ◽

Temperature Variation ◽

Chemical Activation ◽

Weight Ratio ◽

Potassium Silicate ◽

Physical Activation ◽

Activation Temperature ◽

Pyrolysis Reactor

This study aims to determine the effect of variation of activation temperature of activated carbon from sugar palm bunches of chemically activatied with the activation agent of potassium silicate (K2SiO3) on the adsorption capacity of iodine and methylene blue. Activated carbon from bunches of sugar palmacquired in four steps: preparationsteps, carbonizationstepsusing the pyrolysis reactor with temperature of 300 oC - 400 oC for 8 hours and chemical activation using of potassium silicate (K2SiO3) activator in weight ratio of 2: 1 and physical activation using the electric furnace for 30 minutes with temperature variation of600 oC, 650 oC, 700 oC, 750 oC and 800 oC. The iodine and methyleneblue adsorption testedby Titrimetric method and Spectrophotometry methodrespectively. The results of the adsorption of iodine and methylene blue activated carbon from sugar palm bunches increased from 240.55 mg/g and 63.14 mg/g at a temperature of 600 oC to achieve the highest adsorption capacity of 325.80 mg/g and 73.59 mg/g at temperature of 700 oC and decreased by 257.54 mg/g and 52.03 mg/g at a temperature of 800 oCrespectively.However, it does not meet to Indonesia standard (Standard Nasional Indonesia/SNI), which is 750 mg/g and 120 mg/g respectively.

Download Full-text

Computer Analysis of the Effect of Activation Temperature on the Microporous Structure Development of Activated Carbon Derived from Common Polypody

Materials ◽

10.3390/ma14112951 ◽

2021 ◽

Vol 14 (11) ◽

pp. 2951

Author(s):

Mirosław Kwiatkowski ◽

Jarosław Serafin ◽

Andy M. Booth ◽

Beata Michalkiewicz

Keyword(s):

Activated Carbon ◽

Porous Structure ◽

Computer Analysis ◽

Density Functional ◽

Activated Carbons ◽

Chemical Activation ◽

Geometrical Parameters ◽

Activation Process ◽

Microporous Structure ◽

Activation Temperature

This paper presents the results of a computer analysis of the effect of activation process temperature on the development of the microporous structure of activated carbon derived from the leaves of common polypody (Polypodium vulgare) via chemical activation with phosphoric acid (H3PO4) at activation temperatures of 700, 800, and 900 °C. An unconventional approach to porous structure analysis, using the new numerical clustering-based adsorption analysis (LBET) method together with the implemented unique gas state equation, was used in this study. The LBET method is based on unique mathematical models that take into account, in addition to surface heterogeneity, the possibility of molecule clusters branching and the geometric and energy limitations of adsorbate cluster formation. It enabled us to determine a set of parameters comprehensively and reliably describing the porous structure of carbon material on the basis of the determined adsorption isotherm. Porous structure analyses using the LBET method were based on nitrogen (N2), carbon dioxide (CO2), and methane (CH4) adsorption isotherms determined for individual activated carbon. The analyses carried out showed the highest CO2 adsorption capacity for activated carbon obtained was at an activation temperature of 900 °C, a value only slightly higher than that obtained for activated carbon prepared at 700 °C, but the values of geometrical parameters determined for these activated carbons showed significant differences. The results of the analyses obtained with the LBET method were also compared with the results of iodine number analysis and the results obtained with the Brunauer–Emmett–Teller (BET), Dubinin–Radushkevich (DR), and quenched solid density functional theory (QSDFT) methods, demonstrating their complementarity.

Download Full-text

Physics and chemical activation to produce activated carbon from empty palm oil bunches waste

IOP Conference Series Materials Science and Engineering ◽

10.1088/1757-899x/1010/1/012016 ◽

2021 ◽

Vol 1010 ◽

pp. 012016

Author(s):

A Budianto ◽

E Kusdarini ◽

N H Amrullah ◽

E Ningsih ◽

K Udyani ◽

...

Keyword(s):

Activated Carbon ◽

Palm Oil ◽

Chemical Activation

Download Full-text

Structural changes and electrochemical properties of lacquer wood activated carbon prepared by phosphoric acid-chemical activation for supercapacitor applications

Renewable Energy ◽

10.1016/j.renene.2021.05.113 ◽

2021 ◽

Author(s):

Sheng-Chun Hu ◽

Jie Cheng ◽

Wu-Ping Wang ◽

Guo-Tao Sun ◽

Li-Le Hu ◽

...

Keyword(s):

Activated Carbon ◽

Phosphoric Acid ◽

Electrochemical Properties ◽

Structural Changes ◽

Chemical Activation ◽

Supercapacitor Applications

Download Full-text

Development of Formaldehyde Adsorption using Modified Activated Carbon – A Review

International Journal of Renewable Energy Development ◽

10.14710/ijred.1.3.75-80 ◽

2012 ◽

Vol 1 (3) ◽

pp. 75 ◽

Cited By ~ 4

Author(s):

W.D.P Rengga ◽

M. Sudibandriyo ◽

M Nasikin

Keyword(s):

Activated Carbon ◽

Activated Carbons ◽

Chemical Activation ◽

High Energy ◽

Hydrogen Gas ◽

Agricultural Product ◽

Adsorption Method ◽

Modified Activated Carbon ◽

Nano Size ◽

Formaldehyde Adsorption

Gas storage is a technology developed with an adsorptive storage method, in which gases are stored as adsorbed components on the certain adsorbent. Formaldehyde is one of the major indoor gaseous pollutants. Depending on its concentration, formaldehyde may cause minor disorder symptoms to a serious injury. Some of the successful applications of technology for the removal of formaldehyde have been reported. However, this paper presents an overview of several studies on the elimination of formaldehyde that has been done by adsorption method because of its simplicity. The adsorption method does not require high energy and the adsorbent used can be obtained from inexpensive materials. Most researchers used activated carbon as an adsorbent for removal of formaldehyde because of its high adsorption capacity. Activated carbons can be produced from many materials such as coals, woods, or agricultural waste. Some of them were prepared by specific activation methods to improve the surface area. Some researchers also used modified activated carbon by adding specific additive to improve its performance in attracting formaldehyde molecules. Proposed modification methods on activation and additive impregnated carbon are thus discussed in this paper for future development and improvement of formaldehyde adsorption on activated carbon. Specifically, a waste agricultural product is chosen for activated carbon raw material because it is renewable and gives an added value to the materials. The study indicates that the performance of the adsorption of formaldehyde might be improved by using modified activated carbon. Bamboo seems to be the most appropriate raw materials to produce activated carbon combined with applying chemical activation method and addition of metal oxidative catalysts such as Cu or Ag in nano size particles. Bamboo activated carbon can be developed in addition to the capture of formaldehyde as well as the storage of adsorptive hydrogen gas that supports renewable energy. Keywords: adsorption; bamboo; formaldehyde; modified activated carbon; nano size particles

Download Full-text

Comparative Study of Different Activation Treatments for the Preparation of Activated Carbon: A Mini-Review

Science Progress ◽

10.3184/003685017x14967570531606 ◽

2017 ◽

Vol 100 (3) ◽

pp. 299-312 ◽

Cited By ~ 7

Author(s):

Muhammad Imran Din ◽

Sania Ashraf ◽

Azeem Intisar

Keyword(s):

Activated Carbon ◽

Comparative Study ◽

Raw Materials ◽

Chemical Activation ◽

Comparative Approach ◽

Adsorption Mechanisms ◽

Temperature Activation ◽

Activation Conditions ◽

Physical And Chemical ◽

Characterisation Techniques

In this review, various methods of preparation of activated carbon from agricultural and commercial waste material are reviewed. In addition, we also discuss various activation treatments using a comparative approach. The data are organised in tabulated form for ease of comparative study. A review of numerous characterisation techniques is also provided. The effect of time and temperature, activation conditions, carbonisation conditions and impregnation ratios are explained and several physical and chemical activation treatments of raw materials and their impact on the micro- and mesoporous volumes and surface area are discussed. Lastly, a review of adsorption mechanisms of activated carbon (AC) is also provided.

Download Full-text