Designing Poly(vinylidene fluoride)-Silicon Carbide Nanowire Composite Structures to Achieve High Thermal Conductivity

2019 ◽  
Vol 1 (11) ◽  
pp. 2807-2818 ◽  
Author(s):  
Jing He ◽  
Hua Wang ◽  
Zheng Su ◽  
Yulan Guo ◽  
Qiqi Qu ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Silicon Carbide ◽  
Composite Structures ◽  
Vinylidene Fluoride ◽  
High Thermal Conductivity ◽  
Poly Vinylidene Fluoride

Fast and simple fabrication of SiO2/poly(vinylidene fluoride) coated cotton fabrics with asymmetric wettability via a facile spray-coating route

2018 ◽  
Vol 89 (6) ◽  
pp. 1013-1026 ◽  
Author(s):  
Rongrong Yu ◽  
Mingwei Tian ◽  
Lijun Qu ◽  
Shifeng Zhu ◽  
Jianhua Ran ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Contact Angle ◽  
Water Contact Angle ◽  
Vinylidene Fluoride ◽  
Spray Coating ◽  
Cotton Fabrics ◽  
Water Repellent ◽  
Water Contact ◽  
Repellent Property ◽  
Poly Vinylidene Fluoride

Cotton fabrics with hydrophilic-to-hydrophobic asymmetric surfaces are attractive as potential utilizable structures for functional garments. The spray-coating route could be deemed as a fast and simple way to achieve asymmetric surfaces. In this paper, SiO2 nanoparticles with size ∼ 205 nm were synthesized via the modified sol-gel method, and then modified with poly(vinylidene fluoride) (PVDF) to form a hydrophobic surface. The SiO2 nanoparticles modified with PVDF were uniformly deposited on the outer surface of cotton fabric aided with the robust air flow force from the sprayer. The morphology and chemical structures were characterized by scanning electron microscopy, mapping, atomic force microscopy, X-ray photoelectron spectroscopy and Fourier-transform infrared spectroscopy. The results indicated that SiO2 nanoparticles were evenly deposited on the surface of cotton fibers and stable interfacial interaction occurred between SiO2 and PVDF molecular chains. The existence of SiO2 could increase the roughness of the fabric surface, which could enhance the water-repellent property of the coated fabrics. Furthermore, the water-repellent property and thermal insulation properties were evaluated via the water contact angle and thermal conductivity tests, respectively, and the results showed that 20 wt.% SiO2/PVDF fabric achieved a desirable level of contact angle, 136.6°, which was the largest water contact angle among all the samples, and the lowest thermal conductivity of 0.033 W/mK, resulting from the existence of SiO2 nanoparticles. Such a fast and simple spray-coating strategy could be widely introduced into asymmetric fabric modification, and such asymmetric fabrics with reasonable water-repellent and thermal insulating outer surfaces could act as candidates in the field of functional garments.

Three-Dimensional Graphite Filled Poly(Vinylidene Fluoride) Composites with Enhanced Strength and Thermal Conductivity

2020 ◽  
Vol 842 ◽  
pp. 63-68
Author(s):  
Xiao Zhang ◽  
Jian Zheng ◽  
Yong Qiang Du ◽  
Chun Ming Zhang
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Energetic Materials ◽  
High Performance ◽  
Vinylidene Fluoride ◽  
3D Structure ◽  
Three Dimensional ◽  
3D Network ◽  
Poly Vinylidene Fluoride ◽  
Polymer Bonded Explosives

Three-dimensional (3D) network structure has been recognized as an efficient approach to enhance the mechanical and thermal conductive properties of polymeric composites. However, it has not been applied in energetic materials. In this work, a fluoropolymer based composite with vertically oriented and interconnected 3D graphite network was fabricated for polymer bonded explosives (PBXs). Here, the graphite and graphene oxide platelets were mixed, and self-assembled via rapid freezing and using crystallized ice as the template. The 3D structure was finally obtained by freezing-dry, and infiltrating with polymer. With the increasing of filler fraction and cooling rate, the thermal conductivity of the polymer composite was significantly improved to 2.15 W m-1 K-1 by 919% than that of pure polymer. Moreover, the mechanical properties, such as tensile strength and elastic modulus, were enhanced by 117% and 563%, respectively, when the highly ordered structure was embedded in the polymer. We attribute the increased thermal and mechanical properties to this 3D network, which is beneficial to the effective heat conduction and force transfer. This study supports a desirable way to fabricate the strong and thermal conductive fluoropolymer composites used for the high-performance polymer bonded explosives (PBXs).

Sign in / Sign up

Export Citation Format

Share Document