High Interlaminar Shear Strength Enhancement of Carbon Fiber/Epoxy Composite through Fiber- and Matrix-Anchored Carbon Nanotube Networks

2017 ◽  
Vol 9 (10) ◽  
pp. 8960-8966 ◽  
Author(s):  
Yilei Wang ◽  
Suresh Kumar Raman Pillai ◽  
Jianfei Che ◽  
Mary B. Chan-Park
Keyword(s):  
Shear Strength ◽  
Carbon Nanotube ◽  
Carbon Fiber ◽  
Epoxy Composite ◽  
Interlaminar Shear Strength ◽  
Strength Enhancement ◽  
Interlaminar Shear ◽  
Carbon Fiber Epoxy ◽  
Carbon Nanotube Networks

DEGRADATION OF CARBON FIBER/EPOXY COMPOSITES BY XE LAMP AND HUMIDITY

2006 ◽  
Vol 20 (25n27) ◽  
pp. 3686-3691 ◽  
Author(s):  
XIAOJUN LV ◽  
QI ZHANG ◽  
GUOJUN XIE ◽  
GUANJIE LIU
Keyword(s):  
Shear Strength ◽  
Carbon Fiber ◽  
Epoxy Composite ◽  
Interlaminar Shear Strength ◽  
Epoxy Composites ◽  
Radiation Temperature ◽  
Transverse Tensile ◽  
Interlaminar Shear ◽  
Transverse Tensile Strength ◽  
Carbon Fiber Epoxy

In order to understand the effect of natural environmental factors on the carbon fiber/epoxy composites, the degradation of carbon fiber/epoxy composite was studied. The specimens were exposed in a Xe lamp chamber and suffered to ultraviolet light radiation, temperature and/or humidity conditions. The results show that the radiation, temperature and/or humidity could cause extensive corrosion to the surface and interior of the carbon/epoxy composite and attack the interface between matrix and carbon fiber, resulting in an obvious reduction of the transverse tensile strength and interlaminar shear strength. On the contrary, the longitudinal transverse shear strength was not affected much by the radiation, temperature and/or humidity. The results indicate that the radiation, temperature and/or humidity can result in the corrosion of the carbon/epoxy composite and consequently affect the mechanical properties of the carbon/epoxy composite partially.

Microstructure optimizations for improving interlaminar shear strength and self-healing efficiency of spread carbon fiber/epoxy laminates containing microcapsules

2020 ◽  
Vol 55 (1) ◽  
pp. 27-38
Author(s):  
Yasuka Nassho ◽  
Kazuaki Sanada
Keyword(s):  
Shear Strength ◽  
Carbon Fiber ◽  
Optical Microscope ◽  
Interlaminar Shear Strength ◽  
Self Healing ◽  
Short Beam ◽  
Healing Efficiency ◽  
Beam Shear ◽  
Interlaminar Shear ◽  
Carbon Fiber Epoxy

The purpose of this study is to improve interlaminar shear strength and self-healing efficiency of spread carbon fiber (SCF)/epoxy (EP) laminates containing microcapsules. Microencapsulated healing agents were embedded within the laminates to impart a self-healing functionality. Self-healing was demonstrated on short beam shear specimens, and the healing efficiency was evaluated by strain energies of virgin and healed specimens. The effects of microcapsule concentration and diameter on apparent interlaminar shear strength and healing efficiency were discussed. Moreover, damaged areas after short beam shear tests were examined by an optical microscope to investigate the relation between the microstructure and the healing efficiency of the laminates. The results showed that the stiffness and the apparent interlaminar shear strength of the laminates increased as the microcapsule concentration and diameter decreased. However, the healing efficiency decreased with decreasing the microcapsule concentration and diameter.

scholarly journals Development of Electrophoretic Deposition Prototype for Continuous Production of Carbon Nanotube-Modified Carbon Fiber Fabrics Used in High-Performance Multifunctional Composites

Fibers ◽  
2018 ◽  
Vol 6 (4) ◽  
pp. 71
Author(s):  
Guan Gong ◽  
Birgitha Nyström ◽  
Erik Sandlund ◽  
Daniel Eklund ◽  
Maxime Noël ◽  
...  
Keyword(s):  
Shear Strength ◽  
Carbon Nanotube ◽  
Carbon Fiber ◽  
Electrophoretic Deposition ◽  
Aqueous Suspension ◽  
Continuous Production ◽  
Interlaminar Shear Strength ◽  
Ionic Surfactant ◽  
Cfrp Composites ◽  
Interlaminar Shear

An electrophoretic deposition (EPD) prototype was developed aiming at the continuous production of carbon nanotube (CNT) deposited carbon fiber fabric. Such multi-scale reinforcement was used to manufacture carbon fiber-reinforced polymer (CFRP) composites. The overall objective was to improve the mechanical performance and functionalities of CFRP composites. In the current study, the design concept and practical limit of the continuous EPD prototype, as well as the flexural strength and interlaminar shear strength, were the focus. Initial mechanical tests showed that the flexural stiffness and strength of composites with the developed reinforcement were significantly reduced with respect to the composites with pristine reinforcement. However, optical microscopy study revealed that geometrical imperfections, such as waviness and misalignment, had been introduced into the reinforcement fibers and/or bundles when being pulled through the EPD bath, collected on a roll, and dried. These defects are likely to partly or completely shadow any enhancement of the mechanical properties due to the CNT deposit. In order to eliminate the effect of the discovered defects, the pristine reinforcement was subjected to the same EPD treatment, but without the addition of CNT in the EPD bath. When compared with such water-treated reinforcement, the CNT-deposited reinforcement clearly showed a positive effect on the flexural properties and interlaminar shear strength of the composites. It was also discovered that CNTs agglomerate with time under the electric field due to the change of ionic density, which is possibly due to the electrolysis of water (for carboxylated CNT aqueous suspension without surfactant) or the deposition of ionic surfactant along with CNT deposition (for non-functionalized CNT aqueous suspension with surfactant). Currently, this sets time limits for the continuous deposition.

Sign in / Sign up

Export Citation Format

Share Document