Facile One-Step Synthesis of Three-Dimensional Pd–Ag Bimetallic Alloy Networks and Their Electrocatalytic Activity toward Ethanol Oxidation

2015 ◽  
Vol 7 (25) ◽  
pp. 13842-13848 ◽  
Author(s):  
Shaofang Fu ◽  
Chengzhou Zhu ◽  
Dan Du ◽  
Yuehe Lin
Keyword(s):  
Electrocatalytic Activity ◽  
Ethanol Oxidation ◽  
Three Dimensional ◽  
Bimetallic Alloy ◽  
One Step

A three-dimensional interpenetrating electrode of reduced graphene oxide for selective detection of dopamine

The Analyst ◽  
2014 ◽  
Vol 139 (18) ◽  
pp. 4525-4531 ◽  
Author(s):  
Xiaowen Yu ◽  
Kaixuan Sheng ◽  
Gaoquan Shi
Keyword(s):  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Electrocatalytic Activity ◽  
Three Dimensional ◽  
Selective Detection ◽  
Reduced Graphene ◽  
One Step

A three-dimensional (3D) interpenetrating electrode of reduced graphene oxide with high electrocatalytic activity was fabricated by one-step electrodeposition for selective detection of dopamine.

Polydopamine-functionalized multi-walled carbon nanotubes-supported palladium–lead bimetallic alloy nanoparticles as highly efficient and robust catalysts for ethanol oxidation

RSC Advances ◽  
2016 ◽  
Vol 6 (93) ◽  
pp. 90462-90469 ◽  
Author(s):  
Honglei Yang ◽  
Siyi Kang ◽  
Hai Zou ◽  
Jun Jin ◽  
Jiantai Ma ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
High Performance ◽  
Ethanol Oxidation ◽  
Alloy Nanoparticles ◽  
Highly Efficient ◽  
Bimetallic Alloy ◽  
Multi Walled Carbon Nanotubes ◽  
One Step ◽  
Supported Palladium ◽  
Walled Carbon Nanotubes

High performance electrocatalysts of palladium–lead bimetallic alloy nanoparticles anchored onto polydopamine-functionalized multi-walled carbon nanotubes (PDA-MWCNTs) were fabricated by a facile one-step strategy.

Controllable Electrochemical Synthesis of Ag Hierarchical Micro/Nanostructures with High SERS-Activity

NANO ◽  
2020 ◽  
Vol 15 (04) ◽  
pp. 2050043
Author(s):  
Huayu Zhou ◽  
Jingjing Wang ◽  
Qiong Yang ◽  
Menglei Chen ◽  
Changsheng Song ◽  
...  
Keyword(s):  
Indium Tin Oxide ◽  
Current System ◽  
Three Dimensional ◽  
Constant Current ◽  
Localized Surface Plasmon ◽  
Excitation Wavelength ◽  
Raman Signal ◽  
Mixed Solution ◽  
Raman Enhancement ◽  
One Step

We report a one-step electrochemical deposition technique to prepare three-dimensional (3D) Ag hierarchical micro/nanostructured film consisting of well-crystallized Ag nanosheets grown on an indium tin oxide (ITO) conductive substrate. The Ag hierarchical micro/nanostructures were fabricated in the mixed solution of AgNO3 and sodium citrate in a constant current system at room temperature. Through reduction of Ag[Formula: see text] electrodeposited on the surface of ITO substrate, nanoparticles were grown to form nanosheets which further combined into 3D sphere-like microstructures. The 3D Ag micro/nanostructures have many sharp edges and nanoscale gaps which can give rise to good Raman-enhanced effect. Due to localized surface plasmon resonance (LSPR) effects, these special Ag micro/nanostructures exhibited good Raman-enhanced performance. Using Rhodamine 6G (R6G) molecules as probe molecule, we studied the influence of excitation wavelength on Raman enhancement. The results showed that the 532[Formula: see text]nm excitation wavelength is the best to obtain the strongest Raman signal and to reduce the influence of other impurity peaks. Using the as-synthesized Ag hierarchical micro/nanostructures, we can detect the 10[Formula: see text][Formula: see text]mol/L R6G aqueous solution, exhibiting great Raman-enhanced effect.

scholarly journals A Review on Additive Manufacturing Possibilities for Electrical Machines

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1940
Author(s):  
Muhammad Usman Naseer ◽  
Ants Kallaste ◽  
Bilal Asad ◽  
Toomas Vaimann ◽  
Anton Rassõlkin
Keyword(s):  
Additive Manufacturing ◽  
Large Scale ◽  
Three Dimensional ◽  
Electrical Machines ◽  
Electromagnetic Properties ◽  
Scale Production ◽  
Performance Parameters ◽  
Large Scale Production ◽  
One Step ◽  
Manufacturing Techniques

This paper presents current research trends and prospects of utilizing additive manufacturing (AM) techniques to manufacture electrical machines. Modern-day machine applications require extraordinary performance parameters such as high power-density, integrated functionalities, improved thermal, mechanical & electromagnetic properties. AM offers a higher degree of design flexibility to achieve these performance parameters, which is impossible to realize through conventional manufacturing techniques. AM has a lot to offer in every aspect of machine fabrication, such that from size/weight reduction to the realization of complex geometric designs. However, some practical limitations of existing AM techniques restrict their utilization in large scale production industry. The introduction of three-dimensional asymmetry in machine design is an aspect that can be exploited most with the prevalent level of research in AM. In order to take one step further towards the enablement of large-scale production of AM-built electrical machines, this paper also discusses some machine types which can best utilize existing developments in the field of AM.

Hierarchically porous FeNi3@FeNi layered double hydroxide nanostructures: One-step fast electrodeposition and highly efficient electrocatalytic performances for overall water splitting

2021 ◽  
Author(s):  
Zihao Liu ◽  
Shifeng Li ◽  
Fangfang Wang ◽  
Mingxia Li ◽  
Yonghong Ni
Keyword(s):  
Hydrogen Evolution ◽  
Water Splitting ◽  
Oxygen Evolution ◽  
Layered Double Hydroxide ◽  
Hydrogen Evolution Reaction ◽  
Oxygen Evolution Reaction ◽  
Electrocatalytic Activity ◽  
Hierarchically Porous ◽  
One Step ◽  
Double Hydroxide

FeNi-layered double hydroxide (LDH) is thought to be an excellent electrocatalyst for oxygen evolution reaction (OER), but it always shows extremely poor electrocatalytic activity toward hydrogen evolution reaction (HER) in...

scholarly journals Is Dialdehyde Chitosan a Good Substance to Modify Physicochemical Properties of Biopolymeric Materials?

2021 ◽  
Vol 22 (7) ◽  
pp. 3391
Author(s):  
Sylwia Grabska-Zielińska ◽  
Alina Sionkowska ◽  
Ewa Olewnik-Kruszkowska ◽  
Katarzyna Reczyńska ◽  
Elżbieta Pamuła
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Physicochemical Properties ◽  
Silk Fibroin ◽  
Three Dimensional ◽  
Microscopy Imaging ◽  
Maximum Deformation ◽  
One Step ◽  
Chitosan Blends ◽  
Fourier Transfer Infrared Spectroscopy

The aim of this work was to compare physicochemical properties of three dimensional scaffolds based on silk fibroin, collagen and chitosan blends, cross-linked with dialdehyde starch (DAS) and dialdehyde chitosan (DAC). DAS was commercially available, while DAC was obtained by one-step synthesis. Structure and physicochemical properties of the materials were characterized using Fourier transfer infrared spectroscopy with attenuated total reflectance device (FTIR-ATR), swelling behavior and water content measurements, porosity and density observations, scanning electron microscopy imaging (SEM), mechanical properties evaluation and thermogravimetric analysis. Metabolic activity with AlamarBlue assay and live/dead fluorescence staining were performed to evaluate the cytocompatibility of the obtained materials with MG-63 osteoblast-like cells. The results showed that the properties of the scaffolds based on silk fibroin, collagen and chitosan can be modified by chemical cross-linking with DAS and DAC. It was found that DAS and DAC have different influence on the properties of biopolymeric scaffolds. Materials cross-linked with DAS were characterized by higher swelling ability (~4000% for DAS cross-linked materials; ~2500% for DAC cross-linked materials), they had lower density (Coll/CTS/30SF scaffold cross-linked with DAS: 21.8 ± 2.4 g/cm3; cross-linked with DAC: 14.6 ± 0.7 g/cm3) and lower mechanical properties (maximum deformation for DAC cross-linked scaffolds was about 69%; for DAS cross-linked scaffolds it was in the range of 12.67 ± 1.51% and 19.83 ± 1.30%) in comparison to materials cross-linked with DAC. Additionally, scaffolds cross-linked with DAS exhibited higher biocompatibility than those cross-linked with DAC. However, the obtained results showed that both types of scaffolds can provide the support required in regenerative medicine and tissue engineering. The scaffolds presented in the present work can be potentially used in bone tissue engineering to facilitate healing of small bone defects.

Sign in / Sign up

Export Citation Format

Share Document