Amine-Assisted Delaminated 2D Ti3C2Tx MXenes for High Specific Capacitance in Neutral Aqueous Electrolytes

2021 ◽  
Author(s):  
Shan Ren ◽  
Jian-Long Xu ◽  
Liang Cheng ◽  
Xu Gao ◽  
Sui-Dong Wang
Keyword(s):  
Specific Capacitance ◽  
High Specific Capacitance ◽  
Aqueous Electrolytes

scholarly journals The Performance of Fibrous CDC Electrodes in Aqueous and Non-Aqueous Electrolytes

2021 ◽  
Vol 7 (2) ◽  
pp. 46
Author(s):  
Siret Malmberg ◽  
Mati Arulepp ◽  
Krista Laanemets ◽  
Maike Käärik ◽  
Ann Laheäär ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Specific Capacitance ◽  
Salt Concentration ◽  
Electrochemical Behaviour ◽  
High Specific Capacitance ◽  
Production Costs ◽  
Constant Current ◽  
Aqueous Electrolytes ◽  
Concentration Effects ◽  
Cv Measurements

The aim of this study was to investigate the electrochemical behaviour of aqueous electrolytes on thin-layer (20 µm) nanoporous carbide-derived carbon (CDC) composite fibrous directly electrospun electrodes without further carbonisation. There have been previously investigated fibrous electrodes, which are produced by applying different post-treatment processes, however this makes the production of fibrous electrodes more expensive, complex and time consuming. Furthermore, in the present study high specific capacitance was achieved with directly electrospun nanoporous CDC-based fibrous electrodes in different neutral aqueous electrolytes. The benefit of fibrous electrodes is the advanced mechanical properties compared to the existing commercial electrode technologies based on pressure-rolled or slurry-cast powder mix electrodes. Such improved mechanical properties are preferred in more demanding applications, such as in the space industry. Electrospinning technology also allows for larger electrode production capacities without increased production costs. In addition to the influence of aqueous electrolyte chemical composition, the salt concentration effects and cycle stability with respect to organic electrolytes are investigated. Cyclic voltammetry (CV) measurements on electrospun electrodes showed the highest capacitance for asymmetrical cells with an aqueous 1 M NaNO3-H2O electrolyte. High CV capacitance was correlated with constant current charge–discharge (CC) data, for which a specific capacitance of 191 F g−1 for the positively charged electrode and 311 F g−1 for the negatively charged electrode was achieved. The investigation of electrolyte salt concentration on fibrous electrodes revealed the typical capacitance dependence on ionic conductivity with a peak capacitance at medium concentration levels. The cycle-life measurements of selected two-electrode test cells with aqueous and non-aqueous electrolytes revealed good stability of the electrospun electrodes.

Poly(aniline-co-pyrrole)-coated Ni-doped manganese dioxide as electrode materials for supercapacitors

2020 ◽  
Vol 13 (02) ◽  
pp. 2051007
Author(s):  
Jie Dong ◽  
Qinghao Yang ◽  
Qiuli Zhao ◽  
Zhenzhong Hou ◽  
Yue Zhou ◽  
...  
Keyword(s):  
Electrochemical Performance ◽  
Manganese Dioxide ◽  
Specific Capacitance ◽  
Electrode Materials ◽  
High Specific Capacitance ◽  
Cycle Stability ◽  
Mass Ratio ◽  
Scan Rate ◽  
Poly Aniline ◽  
Inorganic And Organic

Electrode materials with a high specific capacitance, outstanding reversibility and excellent cycle stability are constantly pursued for supercapacitors. In this paper, we present an approach to improve the electrochemical performance by combining the advantages of both inorganic and organic. Ni-MnO2/PANi-co-PPy composites are synthesized, with the copolymer of aniline/pyrrole being coated on the surface of Ni-doped manganese dioxide nanospheres. The inorganic–organic composite enables a substantial increase in its specific capacitance and cycle stability. When the mass ratio of Ni-MnO2 to aniline and pyrrole mixed monomer is 1:5, the composite delivers high specific capacitance of 445.49[Formula: see text]F/g at a scan rate of 2[Formula: see text]mV/s and excellent cycle stability of 61.65% retention after 5000 cycles. The results indicate that the Ni-MnO2/PANi-co-PPy composites are promising electrode materials for future supercapacitors application.

Ni(OH)2/3D-rGO supercapacitor material with high specific capacitance

2021 ◽  
Vol 27 ◽  
pp. 102292
Author(s):  
Wei Zeng ◽  
Qiannan Feng ◽  
Jiongliang Yuan
Keyword(s):  
Specific Capacitance ◽  
High Specific Capacitance

scholarly journals Fabrication of Hierarchical NiMoO4/NiMoO4 Nanoflowers on Highly Conductive Flexible Nickel Foam Substrate as a Capacitive Electrode Material for Supercapacitors with Enhanced Electrochemical Performance

Energies ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 1143 ◽  
Author(s):  
Anil Yedluri ◽  
Tarugu Anitha ◽  
Hee-Je Kim
Keyword(s):  
Energy Density ◽  
Electrochemical Performance ◽  
Specific Capacitance ◽  
Electrode Material ◽  
High Performance ◽  
Nickel Foam ◽  
High Specific Capacitance ◽  
High Energy ◽  
High Energy Density ◽  
Charge Discharge

Hierarchical NiMoO4/NiMoO4 nanoflowers were fabricated on highly conductive flexible nickel foam (NF) substrates using a facile hydrothermal method to achieve rapid charge-discharge ability, high energy density, long cycling lifespan, and higher flexibility for high-performance supercapacitor electrode materials. The synthesized composite electrode material, NF/NiMoO4/NiMoO4 with a nanoball-like NF/NiMoO4 structure on a NiMoO4 surface over a NF substrate, formed a three-dimensional interconnected porous network for high-performance electrodes. The novel NF/NiMoO4/NiMoO4 nanoflowers not only enhanced the large surface area and increased the electrochemical activity, but also provided an enhanced rapid ion diffusion path and reduced the charge transfer resistance of the entire electrode effectively. The NF/NiMoO4/NiMoO4 composite exhibited significantly improved supercapacitor performance in terms of a sustained cycling life, high specific capacitance, rapid charge-discharge capability, high energy density, and good rate capability. Electrochemical analysis of the NF/NiMoO4/NiMoO4 nanoflowers fabricated on the NF substrate revealed ultra-high electrochemical performance with a high specific capacitance of 2121 F g−1 at 12 mA g−1 in a 3 M KOH electrolyte and 98.7% capacitance retention after 3000 cycles at 14 mA g−1. This performance was superior to the NF/NiMoO4 nanoball electrode (1672 F g−1 at 12 mA g−1 and capacitance retention 93.4% cycles). Most importantly, the SC (NF/NiMoO4/NiMoO4) device displayed a maximum energy density of 47.13 W h kg−1, which was significantly higher than that of NF/NiMoO4 (37.1 W h kg−1). Overall, the NF/NiMoO4/NiMoO4 composite is a suitable material for supercapacitor applications.

Hybrid nanostructured C-dot decorated Fe3O4electrode materials for superior electrochemical energy storage performance

2015 ◽  
Vol 44 (19) ◽  
pp. 9221-9229 ◽  
Author(s):  
K. Bhattacharya ◽  
P. Deb
Keyword(s):  
Quantum Dots ◽  
Energy Storage ◽  
Specific Capacitance ◽  
High Specific Capacitance ◽  
Carbon Quantum Dots ◽  
Electrochemical Energy Storage ◽  
The Novel ◽  
Hybrid Nanocomposite ◽  
Storage Performance ◽  
Electrochemical Energy

Here, the novel Fe3O4-C hybrid nanocomposite demonstrates high specific capacitance (S.C.) than the pristine Fe3O4nanospheres due to the presence of the highly conducting carbon quantum dots.

Sign in / Sign up

Export Citation Format

Share Document