Enhanced Energy Storage Performance of Polymer/Ceramic/Metal Composites by Increase of Thermal Conductivity and Coulomb-Blockade Effect

2021 ◽  
Author(s):  
Sung-Yub Ji ◽  
Han-Bo Jung ◽  
Min-Kyu Kim ◽  
Ji-Ho Lim ◽  
Jin-Young Kim ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Energy Storage ◽  
Coulomb Blockade ◽  
Metal Composites ◽  
Storage Performance

THERMAL CONDUCTIVITY ENHANCEMENT OF MATERIAL FOR CALCIUM CHLORIDE/WATER THERMOCHEMICAL ENERGY STORAGE

2018 ◽  
Author(s):  
Takuma Ohtaki ◽  
Maho Mitsuo ◽  
Takayuki Terauchi ◽  
Hiroshi Iguchi ◽  
Keiko Fujioka ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Energy Storage ◽  
Calcium Chloride ◽  
Thermal Conductivity Enhancement ◽  
Conductivity Enhancement ◽  
Chloride Water

scholarly journals Thermophysical Properties of Multifunctional Syntactic Foams Containing Phase Change Microcapsules for Thermal Energy Storage

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1790
Author(s):  
Francesco Galvagnini ◽  
Andrea Dorigato ◽  
Luca Fambri ◽  
Giulia Fredi ◽  
Alessandro Pegoretti
Keyword(s):  
Thermal Conductivity ◽  
Energy Storage ◽  
Phase Change ◽  
Epoxy Resin ◽  
Storage Modulus ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Neat Epoxy ◽  
Low Density ◽  
Syntactic Foams

Syntactic foams (SFs) combining an epoxy resin and hollow glass microspheres (HGM) feature a unique combination of low density, high mechanical properties, and low thermal conductivity which can be tuned according to specific applications. In this work, the versatility of epoxy/HGM SFs was further expanded by adding a microencapsulated phase change material (PCM) providing thermal energy storage (TES) ability at a phase change temperature of 43 °C. At this aim, fifteen epoxy (HGM/PCM) compositions with a total filler content (HGM + PCM) of up to 40 vol% were prepared and characterized. The experimental results were fitted with statistical models, which resulted in ternary diagrams that visually represented the properties of the ternary systems and simplified trend identification. Dynamic rheological tests showed that the PCM increased the viscosity of the epoxy resin more than HGM due to the smaller average size (20 µm vs. 60 µm) and that the systems containing both HGM and PCM showed lower viscosity than those containing only one filler type, due to the higher packing efficiency of bimodal filler distributions. HGM strongly reduced the gravimetric density and the thermal insulation properties. In fact, the sample with 40 vol% of HGM showed a density of 0.735 g/cm3 (−35% than neat epoxy) and a thermal conductivity of 0.12 W/(m∙K) (−40% than neat epoxy). Moreover, the increase in the PCM content increased the specific phase change enthalpy, which was up to 68 J/g for the sample with 40 vol% of PCM, with a consequent improvement in the thermal management ability that was also evidenced by temperature profiling tests in transient heating and cooling regimes. Finally, dynamical mechanical thermal analysis (DMTA) showed that both fillers decreased the storage modulus but generally increased the storage modulus normalized by density (E′/ρ) up to 2440 MPa/(g/cm3) at 25 °C with 40 vol% of HGM (+48% than neat epoxy). These results confirmed that the main asset of these ternary multifunctional syntactic foams is their versatility, as the composition can be tuned to reach the property set that best matches the application requirements in terms of TES ability, thermal insulation, and low density.

scholarly journals Research Progress toward Room Temperature Sodium Sulfur Batteries: A Review

Molecules ◽  
2021 ◽  
Vol 26 (6) ◽  
pp. 1535
Author(s):  
Yanjie Wang ◽  
Yingjie Zhang ◽  
Hongyu Cheng ◽  
Zhicong Ni ◽  
Ying Wang ◽  
...  
Keyword(s):  
Energy Storage ◽  
Room Temperature ◽  
High Energy ◽  
Safety Performance ◽  
High Energy Density ◽  
Research Progress ◽  
Storage Performance ◽  
Sulfur Battery ◽  
Sodium Sulfur Battery ◽  
Sodium Sulfur

Lithium metal batteries have achieved large-scale application, but still have limitations such as poor safety performance and high cost, and limited lithium resources limit the production of lithium batteries. The construction of these devices is also hampered by limited lithium supplies. Therefore, it is particularly important to find alternative metals for lithium replacement. Sodium has the properties of rich in content, low cost and ability to provide high voltage, which makes it an ideal substitute for lithium. Sulfur-based materials have attributes of high energy density, high theoretical specific capacity and are easily oxidized. They may be used as cathodes matched with sodium anodes to form a sodium-sulfur battery. Traditional sodium-sulfur batteries are used at a temperature of about 300 °C. In order to solve problems associated with flammability, explosiveness and energy loss caused by high-temperature use conditions, most research is now focused on the development of room temperature sodium-sulfur batteries. Regardless of safety performance or energy storage performance, room temperature sodium-sulfur batteries have great potential as next-generation secondary batteries. This article summarizes the working principle and existing problems for room temperature sodium-sulfur battery, and summarizes the methods necessary to solve key scientific problems to improve the comprehensive energy storage performance of sodium-sulfur battery from four aspects: cathode, anode, electrolyte and separator.

A novel relaxor (Bi,Na,Ba)(Ti,Zr)O 3 lead‐free ceramic with high energy storage performance

2021 ◽  
Author(s):  
Muhammad Kashif Bilal ◽  
Jian Wang ◽  
Rabia Bashir ◽  
Huan Liu ◽  
Sana Ullah Asif ◽  
...  
Keyword(s):  
Energy Storage ◽  
High Energy ◽  
Lead Free ◽  
Storage Performance ◽  
Lead Free Ceramic ◽  
High Energy Storage
Sign in / Sign up

Export Citation Format

Share Document