scholarly journals Multiscale Hierarchical Surface Patterns by Coupling Optical Patterning and Thermal Shrinkage

2021 ◽  
Vol 13 (13) ◽  
pp. 15563-15571
Author(s):  
Hamidreza Daghigh Shirazi ◽  
Yujiao Dong ◽  
Jukka Niskanen ◽  
Chiara Fedele ◽  
Arri Priimagi ◽  
...  
Keyword(s):  
Thermal Shrinkage ◽  
Surface Patterns ◽  
Optical Patterning

Babbitt’s Beguiling Surfaces, Improvised Inside; Part III: Opportunities

2019 ◽  
Vol 5 (3) ◽  
Author(s):  
Joshua Banks Mailman
Keyword(s):  
Music Composition ◽  
Jazz Improvisation ◽  
The Third ◽  
Partial Orderings ◽  
Compositional Structures ◽  
Surface Patterns ◽  
Inside Part ◽  
Musical Activities

Babbitt’s relatively early composition Semi-Simple Variations (1956) presents intriguing surface patterns that are not determined by its pre-compositional plan, but rather result from subsequent “improvised” decisions that are strategic. This video (the third of a three-part video essay) considers Babbitt’s own conversational pronouncements (in radio interviews) together with some particulars of his life-long musical activities, that together suggest uncanny affiliations to jazz improvisation. As a result of Babbitt’s creative reconceptualizing of planning and spontaneity in music, his pre-compositional structures (partial orderings) fit in an unexpected way into (or reformulate) the ecosystem relating music composition to the physical means of its performance.

Application of Automated FIB for TEM Sample Preparation in Semiconductor Failure Analysis

2014 ◽  
Author(s):  
Jie Zhu ◽  
Soo Sien Seah ◽  
Irene Tee ◽  
Bing Hai Liu ◽  
Eddie Er ◽  
...  
Keyword(s):  
Sample Preparation ◽  
Success Rate ◽  
Protective Layer ◽  
Factors Affecting ◽  
Dual Beam ◽  
Lamella Thickness ◽  
Surface Patterns ◽  
Working Parameters ◽  
Practical Factors ◽  
High Flexibility

Abstract In this paper, we describe automated FIB for TEM sample preparation using iFast software on a Helios 450HP dual-beam system. A robust iFast automation recipe needs to consider as many variables as possible in order to ensure consistent sample quality and high success rate. Variations mainly come from samples of different materials, structures, surface patterns, surface topography and surface charging. The recipe also needs to be user-friendly and provide high flexibility by allowing users to choose preferable working parameters for specific types of samples, such as: grounding, protective layer coating, milling steps, and final TEM lamella thickness/width. In addition to the iFast recipe, other practical factors affecting automation success rate are also discussed and highlighted.

scholarly journals Thermal Shrinkage Temperature of Intramuscular Collagen of Bulls and Steers

1984 ◽  
Vol 59 (3) ◽  
pp. 706-709 ◽  
Author(s):  
M. D. Judge ◽  
E. D. Aberle ◽  
H. R. Cross ◽  
B. D. Schanbacher
Keyword(s):  
Thermal Shrinkage ◽  
Shrinkage Temperature

scholarly journals Temporal coherency of mechanical stimuli modulates tactile form perception

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Masashi Nakatani ◽  
Yasuaki Kobayashi ◽  
Kota Ohno ◽  
Masaaki Uesaka ◽  
Sayako Mogami ◽  
...  
Keyword(s):  
Sensory Neuron ◽  
Sensory Neurons ◽  
Contact Surface ◽  
Relative Magnitude ◽  
Form Perception ◽  
Tangential Displacement ◽  
Surface Geometry ◽  
Tactile Stimuli ◽  
Surface Patterns ◽  
Temporal Coherency

AbstractThe human hand can detect both form and texture information of a contact surface. The detection of skin displacement (sustained stimulus) and changes in skin displacement (transient stimulus) are thought to be mediated in different tactile channels; however, tactile form perception may use both types of information. Here, we studied whether both the temporal frequency and the temporal coherency information of tactile stimuli encoded in sensory neurons could be used to recognize the form of contact surfaces. We used the fishbone tactile illusion (FTI), a known tactile phenomenon, as a probe for tactile form perception in humans. This illusion typically occurs with a surface geometry that has a smooth bar and coarse textures in its adjacent areas. When stroking the central bar back and forth with a fingertip, a human observer perceives a hollow surface geometry even though the bar is physically flat. We used a passive high-density pin matrix to extract only the vertical information of the contact surface, suppressing tangential displacement from surface rubbing. Participants in the psychological experiment reported indented surface geometry by tracing over the FTI textures with pin matrices of the different spatial densities (1.0 and 2.0 mm pin intervals). Human participants reported that the relative magnitude of perceived surface indentation steeply decreased when pins in the adjacent areas vibrated in synchrony. To address possible mechanisms for tactile form perception in the FTI, we developed a computational model of sensory neurons to estimate temporal patterns of action potentials from tactile receptive fields. Our computational data suggest that (1) the temporal asynchrony of sensory neuron responses is correlated with the relative magnitude of perceived surface indentation and (2) the spatiotemporal change of displacements in tactile stimuli are correlated with the asynchrony of simulated sensory neuron responses for the fishbone surface patterns. Based on these results, we propose that both the frequency and the asynchrony of temporal activity in sensory neurons could produce tactile form perception.

Prevailing surface patterns

Physics Today ◽  
2021 ◽  
Vol 74 (3) ◽  
pp. 60-60
Author(s):  
Alex Lopatka
Keyword(s):  
Surface Patterns

scholarly journals Pressure Equilibrium Time of a Cyclic-Olefin Copolymer

Polymers ◽  
2021 ◽  
Vol 13 (14) ◽  
pp. 2309
Author(s):  
Benedikt Roth ◽  
Dietmar Drummer
Keyword(s):  
Dynamic Compression ◽  
Flow Behavior ◽  
Superposition Principle ◽  
Applied Pressure ◽  
Thermal Shrinkage ◽  
Compression Rate ◽  
Rate Dependency ◽  
Equilibrium Time ◽  
Simulation Techniques ◽  
Pressure Equilibrium

Integrative simulation techniques for predicting component properties, based on the conditions during processing, are becoming increasingly important. The calculation of orientations in injection molding, which, in addition to mechanical and optical properties, also affect the thermal shrinkage behavior, are modeled on the basis of measurements that cannot take into account the pressure driven flow processes, which cause the orientations during the holding pressure phase. Previous investigations with a high-pressure capillary rheometer (HPC) and closed counter pressure chamber (CPC) showed the significant effect of a dynamically applied pressure on the flow behavior, depending on the temperature and the underlying compression rate. At a constant compression rate, an effective pressure difference between the measuring chamber and the CPC was observed, which resulted in a stop of flow through the capillary referred to as dynamic compression induced solidification. In order to extend the material understanding to the moment after dynamic solidification, an equilibrium time, which is needed until the pressure signals equalize, was evaluated and investigated in terms of a pressure, temperature and a possible compression rate dependency in this study. The findings show an exponential increase of the determined equilibrium time as a function of the holding pressure level and a decrease of the equilibrium time with increasing temperature. In case of supercritical compression in the area of a dynamic solidification, a compression rate dependency of the determined equilibrium times is also found. The measurement results show a temperature-invariant behavior, which allows the derivation of a master curve, according to the superposition principle, to calculate the pressure equilibrium time as a function of the holding pressure and the temperature.

scholarly journals Fire Resistance Behaviour of Geopolymer Concrete:An Overview

Buildings ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 82
Author(s):  
Salmabanu Luhar ◽  
Demetris Nicolaides ◽  
Ismail Luhar
Keyword(s):  
Compressive Strength ◽  
Thermal Resistance ◽  
Building Materials ◽  
Elevated Temperatures ◽  
Construction Materials ◽  
Flexural Behavior ◽  
Thermal Shrinkage ◽  
Physico Chemical ◽  
The Impact ◽  
Loss Of Strength

Even though, an innovative inorganic family of geopolymer concretes are eye-catching potential building materials, it is quite essential to comprehend the fire and thermal resistance of these structural materials at a very high temperature and also when experiencing fire with a view to make certain not only the safety and security of lives and properties but also to establish them as more sustainable edifice materials for future. The experimental and field observations of degree of cracking, spalling and loss of strength within the geopolymer concretes subsequent to exposure at elevated temperature and incidences of occurrences of disastrous fires extend an indication of their resistance against such severely catastrophic conditions. The impact of heat and fire on mechanical attributes viz., mechanical-compressive strength, flexural behavior, elastic modulus; durability—thermal shrinkage; chemical stability; the impact of thermal creep on compressive strength; and microstructure properties—XRD, FTIR, NMR, SEM as well as physico-chemical modifications of geopolymer composites subsequent to their exposures at elevated temperatures is reviewed in depth. The present scientific state-of-the-art review manuscript aimed to assess the fire and thermal resistance of geopolymer concrete along with its thermo-chemistry at a towering temperature in order to introduce this novel, most modern, user and eco-benign construction materials as potentially promising, sustainable, durable, thermal and fire-resistant building materials promoting their optimal and apposite applications for construction and infrastructure industries.

scholarly journals Experimental and Numerical Investigation of 3D Dam-Break Wave Propagation in an Enclosed Domain with Dry and Wet Bottom

2021 ◽  
Vol 11 (12) ◽  
pp. 5638
Author(s):  
Selahattin Kocaman ◽  
Stefania Evangelista ◽  
Hasan Guzel ◽  
Kaan Dal ◽  
Ada Yilmaz ◽  
...  
Keyword(s):  
Wave Propagation ◽  
Numerical Models ◽  
Three Dimensional ◽  
Dam Break ◽  
Dam Failure ◽  
Navier Stokes ◽  
Negative Wave ◽  
Through Flow ◽  
Instantaneous Removal ◽  
Surface Patterns

Dam-break flood waves represent a severe threat to people and properties located in downstream regions. Although dam failure has been among the main subjects investigated in academia, little effort has been made toward investigating wave propagation under the influence of tailwater depth. This work presents three-dimensional (3D) numerical simulations of laboratory experiments of dam-breaks with tailwater performed at the Laboratory of Hydraulics of Iskenderun Technical University, Turkey. The dam-break wave was generated by the instantaneous removal of a sluice gate positioned at the center of a transversal wall forming the reservoir. Specifically, in order to understand the influence of tailwater level on wave propagation, three tests were conducted under the conditions of dry and wet downstream bottom with two different tailwater depths, respectively. The present research analyzes the propagation of the positive and negative wave originated by the dam-break, as well as the wave reflection against the channel’s downstream closed boundary. Digital image processing was used to track water surface patterns, and ultrasonic sensors were positioned at five different locations along the channel in order to obtain water stage hydrographs. Laboratory measurements were compared against the numerical results obtained through FLOW-3D commercial software, solving the 3D Reynolds-Averaged Navier–Stokes (RANS) with the k-ε turbulence model for closure, and Shallow Water Equations (SWEs). The comparison achieved a reasonable agreement with both numerical models, although the RANS showed in general, as expected, a better performance.

Sign in / Sign up

Export Citation Format

Share Document