Achieving Low VOC-deficit Characteristics in Cu2ZnSn(S,Se)4 Solar Cells through Improved Carrier Separation

Author(s):  
Vijay Karade ◽  
Eunyoung Choi ◽  
Myeng Gil Gang ◽  
Hyesun Yoo ◽  
Abhishek Lokhande ◽  
...  
2018 ◽  
Vol 10 (38) ◽  
pp. 32067-32077 ◽  
Author(s):  
Xiangyang Liu ◽  
Shun Wang ◽  
Xinsheng Liu ◽  
Xiaotao Zhao ◽  
Yuzong Gu

2015 ◽  
Vol 137 (25) ◽  
pp. 8192-8198 ◽  
Author(s):  
Andrius Devižis ◽  
Jelissa De Jonghe-Risse ◽  
Roland Hany ◽  
Frank Nüesch ◽  
Sandra Jenatsch ◽  
...  

2017 ◽  
Vol 12 (1) ◽  
Author(s):  
Weiping Wang ◽  
Jialun He ◽  
Yiyan Cao ◽  
Lijing Kong ◽  
Xuanli Zheng ◽  
...  

2020 ◽  
Author(s):  
Gaozhu Wu ◽  
Qing Zhu ◽  
Teng Zhang ◽  
Ziqi Zou ◽  
Weiping Wang ◽  
...  

Abstract Carrier transport behavior in perovskite light absorption layer significantly impacts the performance of perovskite solar cells (PSCs). In this work, reduced carrier recombination losses were achieved by the design of band structure in perovskite materials. An ultrathin (PbI 2 /PbBr 2 ) n film with a gradient thickness ratio was deposited as the lead halide precursor layer by thermal evaporation method, and PSCs with a gradient band structure in perovskite absorption layer were fabricated by a two-step method in ambient atmosphere. For comparison, PSCs with homogeneous perovskite materials of MAPbI 3 and MAPbI x Br 3-x were fabricated as well. It is found that the gradient type-II band structure greatly reduces the carrier lifetime and enhances the carrier separation efficiency. As a result, the PSCs with a gradient band structure exhibit an average power conversion efficiency of 17.5%, which is 1-2% higher than that of traditional PSCs. This work provides a novel method for developing high-efficient PSCs.


2015 ◽  
Vol 6 (1) ◽  
Author(s):  
Chun-Sheng Jiang ◽  
Mengjin Yang ◽  
Yuanyuan Zhou ◽  
Bobby To ◽  
Sanjini U. Nanayakkara ◽  
...  

1998 ◽  
Vol 507 ◽  
Author(s):  
N. Höhne ◽  
R. Carius ◽  
H. Wagner

ABSTRACTA new method to analyse the optical and thermal losses in amorphous silicon solar cells is presented. It is demonstrated that PDS measurements can provide important information on the losses that limit the performance of such cells. The major advantage of the method presented is the ability to determine parameters which are not accessible by other methods, i.e. the reflection, absorption without carrier separation, thermalization and losses in p- and n-layer, field losses, recombination and electrical gain of the solar cell under operating conditions. The method can be applied to thin film solar cells of all kinds complementary to DSR which can also be measured in the same set-up. Eliminating some experimental difficulties could lead to a new comprehensive and complementary characterisation method of solar cells of all kinds.


Sign in / Sign up

Export Citation Format

Share Document