All-Nanofiber-Based Ultralight Stretchable Triboelectric Nanogenerator for Self-Powered Wearable Electronics

2018 ◽  
Vol 1 (5) ◽  
pp. 2326-2332 ◽  
Author(s):  
Shuyu Zhao ◽  
Jiaona Wang ◽  
Xinyu Du ◽  
Jing Wang ◽  
Ran Cao ◽  
...  
Keyword(s):  
Triboelectric Nanogenerator ◽  
Wearable Electronics ◽  
Self Powered

A microcrystalline cellulose ingrained polydimethylsiloxane triboelectric nanogenerator as a self-powered locomotion detector

2017 ◽  
Vol 5 (7) ◽  
pp. 1810-1815 ◽  
Author(s):  
Arunkumar Chandrasekhar ◽  
Nagamalleswara Rao Alluri ◽  
Balasubramaniam Saravanakumar ◽  
Sophia Selvarajan ◽  
Sang-Jae Kim
Keyword(s):  
Microcrystalline Cellulose ◽  
Mechanical Energy ◽  
Power Source ◽  
Triboelectric Nanogenerator ◽  
Wearable Electronics ◽  
Significant Potential ◽  
Self Powered

Scavenging of ambient dissipated mechanical energy addresses the limitations of conventional batteries by providing an auxiliary voltaic power source, and thus has significant potential for self-powered and wearable electronics.

scholarly journals A Robust and Wearable Triboelectric Tactile Patch as Intelligent Human-Achine Interface

Materials ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 6366
Author(s):  
Zhiyuan Hu ◽  
Junpeng Wang ◽  
Yan Wang ◽  
Chuan Wang ◽  
Yawei Wang ◽  
...  
Keyword(s):  
Information Exchange ◽  
Triboelectric Nanogenerator ◽  
Wearable Electronics ◽  
Human Machine Interaction ◽  
Stable Performance ◽  
Machine Interface ◽  
Self Powered ◽  
Machine Interaction ◽  
Stable Signal ◽  
Processing Circuit

The human–machine interface plays an important role in the diversified interactions between humans and machines, especially by swaping information exchange between human and machine operations. Considering the high wearable compatibility and self-powered capability, triboelectric-based interfaces have attracted increasing attention. Herein, this work developed a minimalist and stable interacting patch with the function of sensing and robot controlling based on triboelectric nanogenerator. This robust and wearable patch is composed of several flexible materials, namely polytetrafluoroethylene (PTFE), nylon, hydrogels electrode, and silicone rubber substrate. A signal-processing circuit was used in this patch to convert the sensor signal into a more stable signal (the deviation within 0.1 V), which provides a more effective method for sensing and robot control in a wireless way. Thus, the device can be used to control the movement of robots in real-time and exhibits a good stable performance. A specific algorithm was used in this patch to convert the 1D serial number into a 2D coordinate system, so that the click of the finger can be converted into a sliding track, so as to achieve the trajectory generation of a robot in a wireless way. It is believed that the device-based human–machine interaction with minimalist design has great potential in applications for contact perception, 2D control, robotics, and wearable electronics.

scholarly journals Woven Fabric Triboelectric Nanogenerator for Biomotion Energy Harvesting and as Self-Powered Gait-Recognizing Socks

Energies ◽  
2020 ◽  
Vol 13 (16) ◽  
pp. 4119
Author(s):  
Chaoyu Chen ◽  
Lei Zhang ◽  
Wenbo Ding ◽  
Lijun Chen ◽  
Jinkang Liu ◽  
...  
Keyword(s):  
Low Cost ◽  
Rechargeable Batteries ◽  
Woven Fabric ◽  
Future Research ◽  
Triboelectric Nanogenerator ◽  
Wearable Electronics ◽  
Long Time ◽  
Environmental Pollution Problem ◽  
Self Powered ◽  
High Flexibility

In recent years, rapid advancements have developed in multifunctional and wearable electronics, which call for more lightweight, flexible energy sources. However, traditional disposable batteries and rechargeable batteries are not very suitable because of their bulky appearance, limited capacity, low flexibility, and environmental pollution problem. Here, by applying a mature manufacturing technology that has existed in the textile field for a long time, a woven fabric triboelectric nanogenerator (WF-TENG) with a thinner structure that can be mass-fabricated with low cost, perfect stability, and high flexibility is designed and reported. Due to the good intrinsic quality of TENGs, the maximum voltage of this WF-TENG can easily reach 250 V under a pressure of 3.5 kPa and a tapping frequency of 0.33 Hz. Because of the stable plain-woven structure, the output voltage can remain relatively stable even after the WF-TENG has been working for about 5 h continuously, clearly demonstrating its robustness and practical value. Moreover, good sensitivity endows this WF-TENG with the capability of being applied as self-powered sensors, such as a self-powered smart real-time gait-recognizing sock. This WF-TENG shows us a simple and effective method to fabricate a wearable textile product with functional ability, which is very meaningful for future research.

scholarly journals Self-Powered Flexible Blood Oxygen Monitoring System Based on a Triboelectric Nanogenerator

Nanomaterials ◽  
2019 ◽  
Vol 9 (5) ◽  
pp. 778 ◽  
Author(s):  
Huamin Chen ◽  
Yun Xu ◽  
Jiushuang Zhang ◽  
Weitong Wu ◽  
Guofeng Song
Keyword(s):  
Monitoring System ◽  
Sacrificial Layer ◽  
Triboelectric Nanogenerator ◽  
Blood Oxygen ◽  
Wearable Electronics ◽  
Output Performance ◽  
Supply Problem ◽  
Self Powered ◽  
Oxygen Monitoring ◽  
Functional Components

Flexible optoelectronics based on inorganic functional components have attracted worldwide attention due to their inherent advantages. However, the power supply problem presents a significant obstacle to the commercialization of wearable optoelectronics. Triboelectric nanogenerator (TENG) technology has the potential to realize self-powered applications compared to the conventional charging technologies. Herein, a flexible self-powered blood oxygen monitoring system based on TENG was first demonstrated. The flexibility of the TENG is mainly due to the inherent properties of polydimethylsiloxane (PDMS) and the continuously undulating surface of crumpled gold (Au) and the rough surface on the electrode and PDMS effectively increased the output performance. The output voltage, output current density, and power density were 75.3 V, 7.4 μA, and 0.2 mW/cm2, respectively. By etching the sacrificial layer, we then derived a flexible blood oxygen and pulse detector without any obvious performance degradation. Powered by the TENG, the detector is mounted onto the thumbnail, from where it detects a stable photoplethysmography (PPG) signal which can be used to calculate the oxyhemoglobin saturation and pulse rate. This self-powered system provides a new way to sustainably monitor physiological parameters, which paves the way for development of wearable electronics and battery-free systems.

scholarly journals Cost-Effective Copper–Nickel-Based Triboelectric Nanogenerator for Corrosion-Resistant and High-Output Self-Powered Wearable Electronic Systems

Nanomaterials ◽  
2019 ◽  
Vol 9 (5) ◽  
pp. 700 ◽  
Author(s):  
Kequan Xia ◽  
Zhiwei Xu ◽  
Zhiyuan Zhu ◽  
Hongze Zhang ◽  
Yong Nie
Keyword(s):  
Nickel Alloy ◽  
Short Circuit ◽  
Body Movement ◽  
Open Circuit ◽  
Triboelectric Nanogenerator ◽  
Wearable Electronics ◽  
Corrosion Resistant ◽  
Copper Nickel ◽  
Self Powered ◽  
Copper Nickel Alloy

Recent years, triboelectric nanogenerators (TENGs) have attracted increased attention from researchers worldwide. Owing to their conductivity and triboelectric characteristics, metal materials can be made as both triboelectric materials and conductive electrodes. However, the surface of typical metals (such as copper, aluminum, and iron) is likely to be corroded when the sweat generated by human-body movement drops on the surface of TENGs, as this corrosion is detrimental to the output performance of TENGs. In this work, we proposed a novel corrosion-resistant copper–nickel based TENG (CN-TENG). Copper–nickel alloy conductive tape and polytetrafluoroethylene (PTFE) tape played the role of the triboelectric materials, and polymethyl methacrylate (PMMA) was utilized as the supporting part. The conductive copper–nickel alloy tape also served as a conductive electrode. The open-circuit voltage (VOC) and short-circuit current (ISC) can arrive at 196.8 V and 6 μA, respectively. Furthermore, peak power density values of 45 μW/cm2 were realized for the CN-TENG. A series of experiments confirmed its corrosion-resistant property. The approximate value of VOC for the fabricated TENG integrated into the shoe reached 1500 V, which is capable of driving at least 172 high-power LEDs in series. The results of this research provide a workable method for supporting corrosion-resistant self-powered wearable electronics.

A Compound Yarn Based Wearable Triboelectric Nanogenerator for Self-Powered Wearable Electronics

2018 ◽  
Vol 3 (6) ◽  
pp. 1800065 ◽  
Author(s):  
Hui Li ◽  
Shuyu Zhao ◽  
Xinyu Du ◽  
Jiaona Wang ◽  
Ran Cao ◽  
...  
Keyword(s):  
Triboelectric Nanogenerator ◽  
Wearable Electronics ◽  
Self Powered

Harvesting Energy of Body Motion Through Single Electrode Based Self-Powered Triboelectric Nanogenerator

2019 ◽  
Vol 14 (11) ◽  
pp. 1572-1581 ◽  
Author(s):  
Shamsuddin ◽  
Saeed Ahmed Khan ◽  
Ahmed Ali ◽  
Abdul Qadir Rahimoon ◽  
Palwasha Jalalzai
Keyword(s):  
Energy Harvesting ◽  
Human Skin ◽  
Mechanical Energy ◽  
Short Circuit ◽  
Copper Acetate ◽  
Body Motion ◽  
Triboelectric Nanogenerator ◽  
Wearable Electronics ◽  
Silicon Rubber ◽  
Self Powered

A self-powered mechanical energy harvesting system consists of the storage system and the energy scavenging TENG. Triboelectric nanogenerator includes a system which integrates a self-powered sensor and the power generator, this triboelectric nanogenerator has the potential to be used in a modern wearable electronic TENG. It has been reported that triboelectric nanogenerator working under complicated deformation like bending, stretching and twisting brings the main problem. Here we have fabricated the shape adaptive Triboelectric nanogenerator which solves all the deformation issues and can harvest the mechanical energy through human body motion in any deformation, the fabricated TENG is a self-powered sensor which can sense the different human activities and can monitor the health issues, the TENG stores the energy directly to the capacitor for powering the wearable electronics. A human skin based triboelectric nanogenerator was designed from the silicon rubber and the copper acetate-II used as the electrode, which makes the TENG flexible self-powered sensor, it can be stretched up to 200%. The stretchable nature and the flexibility of the human skin based silicon rubber triboelectric nanogenerator makes it the promising flexible and shape-adaptive energy harvesting TENG. The fabricated TENG generated the open circuit voltage 70 V and the short circuit current 11 μA and delivered the power 55 μW at the load of 80 MΩ. 42 LEDs were powered directly from the TENG. The fabricated TENG has human skin tactile property which does not harm the human skin while using it multiple times. The layer of copper acetate is completely coated with silicone rubber. The fabricated TENG is flexible, biocompatible and cost effective.

Nanowrinkle-patterned flexible woven triboelectric nanogenerator toward self-powered wearable electronics

Nano Energy ◽  
2020 ◽  
Vol 73 ◽  
pp. 104797 ◽  
Author(s):  
Liqiang Liu ◽  
Xiya Yang ◽  
Leilei Zhao ◽  
Wenkai Xu ◽  
Jianwei Wang ◽  
...  
Keyword(s):  
Triboelectric Nanogenerator ◽  
Wearable Electronics ◽  
Self Powered

A high-output triboelectric nanogenerator based on nickel–copper bimetallic hydroxide nanowrinkles for self-powered wearable electronics

2020 ◽  
Vol 8 (48) ◽  
pp. 25995-26003
Author(s):  
Kequan Xia ◽  
Di Wu ◽  
Jiangming Fu ◽  
Nur Amin Hoque ◽  
Ying Ye ◽  
...  
Keyword(s):  
Mechanical Energy ◽  
Human Motion ◽  
Triboelectric Nanogenerator ◽  
Wearable Electronics ◽  
Nickel Copper ◽  
Self Powered ◽  
High Output

This study provides a novel wearable TENG based on nickel–copper bimetallic hydroxide nanowrinkles (NC-TENG) to harvest the mechanical energy from human motion.

Sign in / Sign up

Export Citation Format

Share Document