High-Performance Supercapacitor with Faster Energy Storage and Long Cyclic Life Based on CuO@MnO2 Nano-Core–Shell Array on Carbon Fiber Surface

2020 ◽  
Vol 3 (8) ◽  
pp. 7325-7334
Author(s):  
Haisheng Xie ◽  
Xifei Liu ◽  
Rui Wu ◽  
Junyi Liu ◽  
Jianxun Wu ◽  
...  
Keyword(s):  
Energy Storage ◽  
Carbon Fiber ◽  
High Performance ◽  
Fiber Surface ◽  
Core Shell ◽  
Cyclic Life ◽  
Carbon Fiber Surface

Study of Transcrystallization in Polymer Composites

1989 ◽  
Vol 170 ◽  
Author(s):  
Benjamin S. Hsiao ◽  
J. H. Eric
Keyword(s):  
Thermal Conductivity ◽  
Free Energy ◽  
Carbon Fiber ◽  
Plasma Treatment ◽  
Polymer Composites ◽  
High Performance ◽  
Interfacial Strength ◽  
Fiber Surface ◽  
Semicrystalline Polymers ◽  
First Case

AbstractTranscrystallization of semicrystalline polymers, such as PEEK, PEKK and PPS, in high performance composites has been investigated. It is found that PPDT aramid fiber and pitch-based carbon fiber induce a transcrystalline interphase in all three polymers, whereas in PAN-based carbon fiber and glass fiber systems, transcrystallization occurs only under specific circumstances. Epitaxy is used to explain the surface-induced transcrystalline interphase in the first case. In the latter case, transcrystallization is probably not due to epitaxy, but may be attributed to the thermal conductivity mismatch. Plasma treatment on the fiber surface showed a negligible effect on inducing transcrystallization, implying that surface-free energy was not important. A microdebonding test was adopted to evaluate the interfacial strength between the fiber and matrix. Our preliminary results did not reveal any effect on the fiber/matrix interfacial strength of transcrystallinity.

Core-shell nanostructured Zn-Co-O@CoS arrays for high-performance hybrid supercapacitors

2021 ◽  
Author(s):  
Yi He ◽  
Lei Xie ◽  
Shixiang Ding ◽  
Yujia Long ◽  
Xinyi Zhou ◽  
...  
Keyword(s):  
Zinc Oxide ◽  
Energy Storage ◽  
Active Sites ◽  
High Performance ◽  
Electronic Conductivity ◽  
Wide Distribution ◽  
Energy Storage Materials ◽  
Core Shell ◽  
Storage Materials ◽  
Hybrid Supercapacitors

Although the zinc oxide (ZnO) with wide distribution is one of the most attractive energy storage materials, the low electronic conductivity and insufficient active sites of bulk ZnO increase the...

CuO@NiCoFe-S core-shell nanorod arrays based on Cu foam for high performance energy storage

2021 ◽  
Author(s):  
Zeyuan Hu ◽  
Yidong Miao ◽  
Xiaolan Xue ◽  
Bin Xiao ◽  
Jiqiu Qi ◽  
...  
Keyword(s):  
Energy Storage ◽  
High Performance ◽  
Core Shell ◽  
Nanorod Arrays ◽  
Cu Foam

Preparation and Property of Epoxy Based Nano-SiO2/TiO2/Polyimide Hybrid Enhanced Sizing

2011 ◽  
Vol 335-336 ◽  
pp. 96-100
Author(s):  
Cun Zhou ◽  
Jian Li Cheng ◽  
Yu Sun
Keyword(s):  
Carbon Fiber ◽  
Sol Gel ◽  
Fiber Surface ◽  
Nano Particles ◽  
Interface Properties ◽  
Particle Size Analyzer ◽  
Complex Technology ◽  
Carbon Fiber Surface ◽  
Interlaminar Shear ◽  
Micro Morphology

Abstract: An epoxy based nano-SiO2/TiO2/polyimide hybrid enhanced sizing for carbon fiber was prepared by modified SiO2/TiO2precursor in PAA collosol with silane couple agent(WD-50) and eligibility surfactant via sol-gel reaction, and both ultrasonic cavitation and multi-complex technology were used during the process. The properties of PAA-SiO2-TiO2hybrid sizing and micro-morphology of carbon fiber surface were analyzed by FTIR, DSC, Particle Size Analyzer and STM. The results indicated that nanoscale SiO2•TiO2particles dispersed in the hybrid sizing film homogeneously, and a layer with nano particles was formed on carbon fiber surface after treated by the hybrid enhanceing sizing. The roughness was increased and interface properties of carbon fiber would be improved. At the same time both tensile strength and the interlaminar shear strength were increased obviously.

High-Performance Supercapacitors Based on ɛ-MnO2/RGO Fiber Electrodes for Wearable Energy Storage

2018 ◽  
Vol 18 (12) ◽  
pp. 8352-8359 ◽  
Author(s):  
Xibin Liu ◽  
Gaohua liao ◽  
Xiang Qi ◽  
Xiaoan Mei ◽  
Jifei Wang ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Energy Storage ◽  
High Performance ◽  
Fiber Surface ◽  
Current Collector ◽  
Cost Effective ◽  
Surface Acting ◽  
Energy Storage Devices ◽  
Hybrid Fibers ◽  
Storage Devices

Hybrid fibers based on MnO2/reduced graphene oxide have been fabricated for flexible energy storage devices. Graphene oxide nanoflakes were reduced in a polytetrafluoroethylene (PTFE) pipeline under the appropriate condition to develop a fiber current collector, which also provides the possibility of weaving. The RGO fiber with the radius of about 35 μm has a resistance of 150 Ω · cm. MnO2 nanoflakes directly grow on the RGO fiber surface acting as the electrode material of the device. The MnO2/RGO hybrid fibers provide excellent energy storage performances. The as-fabricated SC exhibits a high areal capacitance of 1.37 F·cm−2 at the scan rate of 1 mV·s−1, and outstanding long-term cycling stability of 93.75% retention after 5000 cycles. This work demonstrates a cost-effective and versatile strategy for wearable energy storage devices.

Amine-Functionalized Carbon-Fiber Microelectrodes for Enhanced ATP Detection with Fast-Scan Cyclic Voltammetry

2021 ◽  
Author(s):  
Yuxin Li ◽  
Moriah E. Weese ◽  
Michael T. Cryan ◽  
Ashley E. Ross
Keyword(s):  
Cyclic Voltammetry ◽  
Carbon Fiber ◽  
Adenosine Triphosphate ◽  
Fiber Surface ◽  
Fast Scan Cyclic Voltammetry ◽  
Extracellular Signaling ◽  
Amine Functionalized ◽  
Carbon Fiber Surface ◽  
Carbon Fiber Microelectrodes ◽  
Atp Detection

Here, we provide evidence that functionalizing the carbon-fiber surface with amines significantly improves direct electrochemical adenosine triphosphate (ATP) detection with fast-scan cyclic voltammetry (FSCV). ATP is an important extracellular signaling...

Sign in / Sign up

Export Citation Format

Share Document