Heterogeneous Esterification from α-Hydroxy Ketone and Alcohols through a Tandem Oxidation Process over a Hydrotalcite-Supported Bimetallic Catalyst

2018 ◽  
Vol 22 (12) ◽  
pp. 1716-1722 ◽  
Author(s):  
Xu Meng ◽  
Xiuru Bi ◽  
Gexin Chen ◽  
Baohua Chen ◽  
Peiqing Zhao
Keyword(s):  
Oxidation Process ◽  
Bimetallic Catalyst ◽  
Hydroxy Ketone ◽  
Heterogeneous Esterification

Control of Metal Alloy Oxidation with Electric Fields

1973 ◽  
Vol 31 ◽  
pp. 164-165
Author(s):  
R. R. Dils ◽  
P. S. Follansbee
Keyword(s):  
Electric Fields ◽  
Oxidation Process ◽  
Base Alloy ◽  
Oxide Surface ◽  
Platinum Electrodes ◽  
Insulating Layer ◽  
Iron Base Alloy ◽  
Alloy Oxidation ◽  
Aluminum Oxide Layer ◽  
And Control

Electric fields have been applied across oxides growing on a high temperature alloy and control of the oxidation of the material has been demonstrated. At present, three-fold increases in the oxidation rate have been measured in accelerating fields and the oxidation process has been completely stopped in a retarding field.The experiments have been conducted with an iron-base alloy, Pe 25Cr 5A1 0.1Y, although, in principle, any alloy capable of forming an adherent aluminum oxide layer during oxidation can be used. A specimen is polished and oxidized to produce a thin, uniform insulating layer on one surface. Three platinum electrodes are sputtered on the oxide surface and the specimen is reoxidized.

Structural Imperfections in thin Oxide Films Formed on Some Fe- and Ni-Base Alloys

1970 ◽  
Vol 28 ◽  
pp. 510-511
Author(s):  
L. P. Lemaire ◽  
D. E. Fornwalt ◽  
F. S. Pettit ◽  
B. H. Kear
Keyword(s):  
Oxide Scale ◽  
Oxidation Process ◽  
Short Circuit ◽  
Protective Oxide ◽  
Protective Oxide Scale ◽  
Thin Oxide Films ◽  
Diffusion Paths ◽  
Oxidation Resistant ◽  
Structural Imperfections ◽  
Short Circuit Diffusion

Oxidation resistant alloys depend on the formation of a continuous layer of protective oxide scale during the oxidation process. The initial stages of oxidation of multi-component alloys can be quite complex, since numerous metal oxides can be formed. For oxidation resistance, the composition is adjusted so that selective oxidation occurs of that element whose oxide affords the most protection. Ideally, the protective oxide scale should be i) structurally perfect, so as to avoid short-circuit diffusion paths, and ii) strongly adherent to the alloy substrate, which minimizes spalling in response to thermal cycling. Small concentrations (∼ 0.1%) of certain reactive elements, such as yttrium, markedly improve the adherence of oxide scales in many alloy systems.

Structure and composition of metal particles in Pt-Sn/Al2O3 bimetallic catalysts

1990 ◽  
Vol 48 (4) ◽  
pp. 278-279
Author(s):  
A. Sachdev ◽  
J. Schwank
Keyword(s):  
Bimetallic Catalysts ◽  
Bimetallic Catalyst ◽  
Size Structure ◽  
High Surface ◽  
High Surface Area ◽  
Metal Particles ◽  
Alloy Formation ◽  
Particle Size Range ◽  
Oxide Supports ◽  
Petroleum Fractions

Platinum - tin bimetallic catalysts have been primarily utilized in the chemical industry in the catalytic reforming of petroleum fractions. In this process the naphtha feedstock is converted to hydrocarbons with higher octane numbers and high anti-knock qualities. Most of these catalysts contain small metal particles or crystallites supported on high surface area insulating oxide supports. The determination of the structure and composition of these particles is crucial to the understanding of the catalytic behavior. In a bimetallic catalyst it is important to know how the two metals are distributed within the particle size range and in what way the addition of a second metal affects the size, structure and composition of the metal particles. An added complication in the Pt-Sn system is the possibility of alloy formation between the two elements for all atomic ratios.

Elemental Distribution in Pt-Re:Al2O3 Naphtha Reforming Catalysts

1980 ◽  
Vol 38 ◽  
pp. 200-201
Author(s):  
R. L. Freed ◽  
M. J. Kelley
Keyword(s):  
Bimetallic Catalyst ◽  
Supported Catalysts ◽  
Coke Formation ◽  
Materials Characterization ◽  
Metal Catalyst ◽  
Elemental Distribution ◽  
Exact Nature ◽  
Naphtha Reforming ◽  
Reforming Catalysts ◽  
Commercial Introduction

The commercial introduction of Pt-Re supported catalysts to replace Pt alone on Al2O3 has brought improvements to naphtha reforming. The bimetallic catalyst can be operated continuously under conditions which lead to deactivation of the single metal catalyst by coke formation. Much disagreement still exists as to the exact nature of the bimetallic catalyst at a microscopic level and how it functions in the process so successfully. The overall purpose of this study was to develop the materials characterization tools necessary to study supported catalysts. Specifically with the Pt-Re:Al2O3 catalyst, we sought to elucidate the elemental distribution on the catalyst.

Nanometer Scale Spectroscopic Visualization of Catalytic Sites During a Hydrogenation Reaction on a Pd/Au Bimetallic Catalyst

2020 ◽  
Author(s):  
hao yin ◽  
Liqing Zheng ◽  
Wei Fang ◽  
Yin-Hung Lai ◽  
Nikolaus Porenta ◽  
...  
Keyword(s):  
Catalytic Hydrogenation ◽  
Density Functional ◽  
Hydrogen Transfer ◽  
Bimetallic Catalyst ◽  
Local Environment ◽  
Hydrogenation Reaction ◽  
Boundary Density ◽  
Catalytic Sites ◽  
Powerful Analytical Tool ◽  
Tip Enhanced Raman Spectroscopy

<p>Understanding the mechanism of catalytic hydrogenation at the local environment requires chemical and topographic information involving catalytic sites, active hydrogen species and their spatial distribution. Here, tip-enhanced Raman spectroscopy (TERS) was employed to study the catalytic hydrogenation of chloro-nitrobenzenethiol on a well-defined Pd(sub-monolayer)/Au(111) bimetallic catalyst (<i>p</i><sub>H2</sub>=1.5 bar, 298 K), where the surface topography and chemical fingerprint information were simultaneously mapped with nanoscale resolution (≈10 nm). TERS imaging of the surface after catalytic hydrogenation confirms that the reaction occurs beyond the location of Pd sites. The results demonstrate that hydrogen spillover accelerates hydrogenation at the Au sites within 20 nm from the bimetallic Pd/Au boundary. Density functional theory was used to elucidate the thermodynamics of interfacial hydrogen transfer. We demonstrate that TERS as a powerful analytical tool provides a unique approach to spatially investigate the local structure-reactivity relationship in catalysis.</p>

Nanometer Scale Spectroscopic Visualization of Catalytic Sites During a Hydrogenation Reaction on a Pd/Au Bimetallic Catalyst

2020 ◽  
Author(s):  
Hao Yin ◽  
Liqing Zheng ◽  
Wei Fang ◽  
Yin-Hung Lai ◽  
Nikolaus Porenta ◽  
...  
Keyword(s):  
Catalytic Hydrogenation ◽  
Density Functional ◽  
Hydrogen Transfer ◽  
Bimetallic Catalyst ◽  
Local Environment ◽  
Hydrogenation Reaction ◽  
Boundary Density ◽  
Catalytic Sites ◽  
Powerful Analytical Tool ◽  
Tip Enhanced Raman Spectroscopy

<p>Understanding the mechanism of catalytic hydrogenation at the local environment requires chemical and topographic information involving catalytic sites, active hydrogen species and their spatial distribution. Here, tip-enhanced Raman spectroscopy (TERS) was employed to study the catalytic hydrogenation of chloro-nitrobenzenethiol on a well-defined Pd(sub-monolayer)/Au(111) bimetallic catalyst (<i>p</i><sub>H2</sub>=1.5 bar, 298 K), where the surface topography and chemical fingerprint information were simultaneously mapped with nanoscale resolution (≈10 nm). TERS imaging of the surface after catalytic hydrogenation confirms that the reaction occurs beyond the location of Pd sites. The results demonstrate that hydrogen spillover accelerates hydrogenation at the Au sites within 20 nm from the bimetallic Pd/Au boundary. Density functional theory was used to elucidate the thermodynamics of interfacial hydrogen transfer. We demonstrate that TERS as a powerful analytical tool provides a unique approach to spatially investigate the local structure-reactivity relationship in catalysis.</p>

Novel CO2-Thermic Oxidation Process with Mg-Based Intermetallic Compounds and Its Application to Energy Storage Materials

2018 ◽  
Author(s):  
Younghwan Cha ◽  
Jung-In Lee ◽  
Panpan Dong ◽  
Xiahui Zhang ◽  
Min-Kyu Song
Keyword(s):  
Intermetallic Compounds ◽  
Oxidation Process ◽  
Value Added ◽  
Energy Storage Materials ◽  
Reaction Products ◽  
Materials Synthesis ◽  
Energy Materials ◽  
A Value ◽  
Carbon Coated ◽  
Novel Strategy

A novel strategy for the oxidation of Mg-based intermetallic compounds using CO<sub>2</sub> as an oxidizing agent was realized via simple thermal treatment, called ‘CO2-thermic Oxidation Process (CO-OP)’. Furthermore, as a value-added application, electrochemical properties of one of the reaction products (carbon-coated macroporous silicon) was evaluated. Considering the facile tunability of the chemical/physical properties of Mg-based intermetallics, we believe that this route can provide a simple and versatile platform for functional energy materials synthesis as well as CO<sub>2</sub> chemical utilization in an environment-friendly and sustainable way.

Sign in / Sign up

Export Citation Format

Share Document