In Situ Photoelectron Spectroscopy Study on the Buffer Role of Multiwalled Carbon Nanotubes against Thermal Degradation in Organic Conducting Composite Films with PEDOT:PSS

2019 ◽  
Vol 123 (4) ◽  
pp. 2238-2247 ◽  
Author(s):  
Dong-Jin Yun ◽  
Sung-Hoon Park ◽  
Jinyoung Hwang ◽  
Hyemin Ra ◽  
Jung-Min Kim ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Thermal Degradation ◽  
Multiwalled Carbon Nanotubes ◽  
Photoelectron Spectroscopy ◽  
Composite Films ◽  
Spectroscopy Study ◽  
Multiwalled Carbon ◽  
Conducting Composite

Multiwalled Carbon Nanotubes Covered with Cobalt (II) Phthalocyanine by In Situ Synthesis and its Electrochemical Sensing Performance towards DA and UA

2014 ◽  
Vol 809-810 ◽  
pp. 43-52
Author(s):  
Hua Hua Wang ◽  
Nan Li ◽  
Kai Li ◽  
Yuan Bu ◽  
Wen Le Dai ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Multiwalled Carbon Nanotubes ◽  
Photoelectron Spectroscopy ◽  
Simultaneous Detection ◽  
Thick Layer ◽  
Electrochemical Sensing ◽  
Multiwalled Carbon ◽  
X Ray ◽  
Platinum Particles

Multiwalled carbon nanotubes (MWCNTs) as an excellent supporter covered with a thick layer of cobalt phthalocyanine (CoPc) were prepared by in-situ synthesis. Platinum particles were adopted to enhance the conductivity of CoPc-MWCNTs. The final nanocomposite Pt-CoPc-MWCNTs was characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). Strong aromatic π-π stacking between MWCNTs and CoPc made CoPc in-situ forming on MWCNTs. With homogeneous thickness of CoPc covered on the MWCNTs and Pt particles equally distributed, the nanocomposite was used as electrocatalyst. The electrochemical properties of the composite got researched by casting the dispersion of Pt-CoPc-MWCNTs on the glassy carbon electrode. Compared with other modified electrodes, Pt-CoPc-MWCNTs/GC electrode exhibited excellent electrochemical activity towards dopamine (DA) and uric acid (UA). Linear responses for DA and UA were obtained in the ranges of 5 to 170 μM and 5 to 100 μM, and limits of detection were 2.6 and 1.4 μM (S/N= 3), respectively. Simultaneous detection of DA and UA in the presence of ascorbic acid (AA) also displayed selective property, with no interference to each other.

scholarly journals Significantly Improved Dielectric Performance of Poly(1-butene)-Based Composite Films via Filling Polydopamine Modified Ba(Zr0.2Ti0.8)O3-Coated Multiwalled Carbon Nanotubes Nanoparticles

Polymers ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 285
Author(s):  
Lingfei Li ◽  
Qiu Sun ◽  
Xiangqun Chen ◽  
Zhaohua Jiang ◽  
Yongjun Xu
Keyword(s):  
Carbon Nanotubes ◽  
Dielectric Constant ◽  
Energy Storage ◽  
Composite Film ◽  
Multiwalled Carbon Nanotubes ◽  
Sol Gel ◽  
Composite Films ◽  
Weak Electric Field ◽  
Multiwalled Carbon ◽  
Dielectric Performance

The low dielectric constant of the nonpolar polymer poly(1-butene) (PB-1) limits its application as a diaphragm element in energy storage capacitors. In this work, Ba(Zr0.2Ti0.8)O3-coated multiwalled carbon nanotubes (BZT@MWCNTs) were first prepared by using the sol–gel hydrothermal method and then modified with polydopamine (PDA) via noncovalent polymerization. Finally, PB-1 matrix composite films filled with PDA-modified BZT@MWCNTs nanoparticles were fabricated through a solution-casting method. Results indicated that the PDA-modified BZT@MWCNTs had good dispersion and binding force in the PB-1 matrix. These characteristics improved the dielectric and energy storage performances of the films. Specifically, the PDA-modified 10 vol% BZT@ 0.5 vol% MWCNTs/PB-1 composite film exhibited the best dielectric performance. At 1 kHz, the dielectric constant of this film was 25.43, which was 12.7 times that of pure PB-1 films. Moreover, its dielectric loss was 0.0077. Furthermore, under the weak electric field of 210 MV·m−1, the highest energy density of the PDA-modified 10 vol% BZT@ 0.5 vol% MWCNTs/PB-1 composite film was 4.57 J·cm−3, which was over 3.5 times that of PB-1 film (≈1.3 J·cm−3 at 388 MV·m−1).

SILK FIBROIN FILMS CRYSTALLIZED BY MULTIWALLED CARBON NANOTUBES

2008 ◽  
Vol 22 (09n11) ◽  
pp. 1807-1812 ◽  
Author(s):  
H.-S. KIM ◽  
W.-I. PARK ◽  
Y. KIM ◽  
H.-J. JIN
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Multiwalled Carbon Nanotubes ◽  
Silk Fibroin ◽  
Composite Films ◽  
Tensile Modulus ◽  
Multiwalled Carbon ◽  
Regenerated Silk Fibroin ◽  
Silk Films ◽  
Β Sheet

Silk films prepared from regenerated silk fibroin are normally stabilized by β-sheet formation through the use of solvents (methanol, water etc.). Herein, we report a new method of preparing water-stable films without a β-sheet conformation from regenerated silk fibroin solutions by incorporating a small amount (0.2 wt%) of multiwalled carbon nanotubes (MWCNTs). To extend the biomaterial utility of silk proteins, forming water-stable silk-based materials with enhanced mechanical properties is essential. Scanning electron microscopy and transmission electron microscopy were used to observe the morphology of the MWCNT-incorporated silk films. The wide-angle X-ray diffraction provided clear evidence of the crystallization of the silk fibroin induced by MWCNT in the composite films without any additional annealing processing. The tensile modulus and strength of the composite films were improved by 108% and 51%, respectively, by the incorporation of 0.2 wt% of MWCNTs, as compared with those of the pure silk films. The method described in this study will provide an alternative means of crystallizing silk fibroin films without using an organic solvent or blending with any other polymers, which may be important in biomedical applications.

Removal of Pb(II) and Cu(II) from aqueous solution using multiwalled carbon nanotubes/iron oxide magnetic composites

2011 ◽  
Vol 63 (5) ◽  
pp. 917-923 ◽  
Author(s):  
Jun Hu ◽  
Donglin Zhao ◽  
Xiangke Wang
Keyword(s):  
Carbon Nanotubes ◽  
Iron Oxide ◽  
Multiwalled Carbon Nanotubes ◽  
Sorption Capacity ◽  
Photoelectron Spectroscopy ◽  
Metal Ion ◽  
Precipitation Method ◽  
Multiwalled Carbon ◽  
Magnetic Composites ◽  
X Ray

Multiwalled carbon nanotubes (MWCNTs)/iron oxide magnetic composites (named as MCs) were prepared by co-precipitation method, and were characterised by scanning electron microscope (SEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) in detail. The prepared MCs were employed as an adsorbent for the removal of Pb(II) and Cu(II) ions from wastewater in heavy metal ion pollution cleanup. The results demonstrated that the sorption of Pb(II) and Cu(II) ions was strongly dependent on pH and temperature. The experimental data were well described by Langmuir model, and the monolayer sorption capacity of MCs was found to vary from 10.02 to 31.25 mg/g for Pb(II) and from 3.11 to 8.92 mg/g for Cu(II) at temperature increasing from 293.15 to 353.15 K at pH 5.50. The sorption capacity of Pb(II) on MCs was higher than that of Cu(II), which was attributed to their ionic radius, hydration energies and hydrolysis of their hydroxides. The thermodynamic parameters (i.e., ΔH0, ΔS0 and ΔG0) were calculated from temperature dependent sorption isotherms, and the results indicated that the sorption of Pb(II) and Cu(II) ions on MCs were spontaneous and endothermic processes.

In-Situ Characterization of Carbon Nanotube-Polystyrene Composite Deformation

2000 ◽  
Vol 6 (S2) ◽  
pp. 40-41
Author(s):  
D. Qian ◽  
E. C. Dickey ◽  
R. Andrews ◽  
T. Rantell ◽  
B. Safadi
Keyword(s):  
Carbon Nanotubes ◽  
Load Transfer ◽  
Electronic Materials ◽  
Composite Films ◽  
Chemical Vapor ◽  
Ex Situ ◽  
In Situ Tem ◽  
Multiwalled Carbon ◽  
Young’S Moduli

Carbon nanotubes (NTs) have novel electronic properties and exceptionally high Young's moduli on the order of TPa. so NTs have potential applications in advanced composite materials such as conductive polymers, electromagnetic-radio frequency interference (EMI/RFI) shielding material and opto-electronic materials. The utility of the nanotubes in composite applications depends strongly on the ability to disperse the NTs homogeneously throughout the matrix without destroying the integrity of the NTs. Furthermore, interfacial bonding between the NT and matrix is necessary to achieve load transfer across the interface, which is desirable for improving the mechanical properties of polymer composites.In this work, aligned multiwalled carbon nanotubes (MWNTs) produced by continuous chemical vapor deposition (CVD) (see Fig.l), were homogeneously dispersed in polystyrene (PS) matrices by a simple solution-evaporation method. Using this procedure, we made uniform MWNT-PS composite films ∼0.4mm thick for ex-situ mechanical tensile test and very thin films, ∼100nm, for in-situ TEM tests, as shown in Fig.2.

Synthesis and Performance of Dopa-Modified Multiwalled Carbon Nanotubes

2012 ◽  
Vol 184-185 ◽  
pp. 1289-1293
Author(s):  
Lu Zhi Wang ◽  
Lin Yu ◽  
Xiao Ling Cheng ◽  
Jun He ◽  
Le Jia Lin ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Multiwalled Carbon Nanotubes ◽  
Photoelectron Spectroscopy ◽  
Multiwalled Carbon ◽  
X Ray ◽  
Multiwalled Nanotubes ◽  
Mixed Acid ◽  
Transmission Electron ◽  
Ft Ir ◽  
And Performance

The Dopamine-modified multiwalled carbon nanotubes (MWNT-Dopa) were synthesized by chemical reaction between dopamine (Dopa) and multiwalled carbon nanotubes which oxidazed by mixed-acid (MWNT-COOH). The structure of MWNT-Dopa were analyzed by Fourier transform infrared spectroscopy (FT-IR), Thermogravimetric (TG), Transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) techniques and the dispersity of MWNT-Dopa were studied by Dispersion stability analyzer. The results show that dopamine has been grafted on multiwalled carbon nanotubes successfully, and a dopamine layer which wraps on the surface of multiwalled nanotubes make multiwalled nanotubes have outstanding dispersity in water.

Sign in / Sign up

Export Citation Format

Share Document