Decoration of Inorganic Nanostructures by Metallic Nanoparticles to Induce Fluorescence, Enhance Solubility, and Tune Band Gap

2018 ◽  
Vol 122 (12) ◽  
pp. 6748-6759 ◽  
Author(s):  
Priyadarshi Ranjan ◽  
Sreejith Shankar ◽  
Ronit Popovitz-Biro ◽  
Sidney R. Cohen ◽  
Ifat Kaplan-Ashiri ◽  
...  
Keyword(s):  
Band Gap ◽  
Metallic Nanoparticles ◽  
Inorganic Nanostructures

TEM and cathodoluminescence of precipitates in II-VI semiconductors

1988 ◽  
Vol 46 ◽  
pp. 488-489
Author(s):  
Joanna L. Batstone
Keyword(s):  
Crystal Growth ◽  
Band Gap ◽  
Local Strain ◽  
Wide Band ◽  
Optoelectronic Device ◽  
Wide Band Gap ◽  
Bulk Crystal Growth ◽  
Transmission Electron ◽  
Device Applications ◽  
Stoichiometry Control

Interest in II-VI semiconductors centres around optoelectronic device applications. The wide band gap II-VI semiconductors such as ZnS, ZnSe and ZnTe have been used in lasers and electroluminescent displays yielding room temperature blue luminescence. The narrow gap II-VI semiconductors such as CdTe and HgxCd1-x Te are currently used for infrared detectors, where the band gap can be varied continuously by changing the alloy composition x.Two major sources of precipitation can be identified in II-VI materials; (i) dopant introduction leading to local variations in concentration and subsequent precipitation and (ii) Te precipitation in ZnTe, CdTe and HgCdTe due to native point defects which arise from problems associated with stoichiometry control during crystal growth. Precipitation is observed in both bulk crystal growth and epitaxial growth and is frequently associated with segregation and precipitation at dislocations and grain boundaries. Precipitation has been observed using transmission electron microscopy (TEM) which is sensitive to local strain fields around inclusions.

Structural properties of GaAs/InGaAs/GaAs (001) and InGaAs/GaAs (001) heterostructures and correlation with electronic properties

1990 ◽  
Vol 48 (4) ◽  
pp. 602-603
Author(s):  
J.M. Bonar ◽  
R. Hull ◽  
R. Malik ◽  
R. Ryan ◽  
J.F. Walker
Keyword(s):  
Band Gap ◽  
Electronic Properties ◽  
Gaas Substrate ◽  
Critical Thickness ◽  
Lattice Mismatch ◽  
Band Offset ◽  
Misfit Dislocations ◽  
Gaas Substrates ◽  
Gaas Structure ◽  
Low X

In this study we have examined a series of strained heteropeitaxial GaAs/InGaAs/GaAs and InGaAs/GaAs structures, both on (001) GaAs substrates. These heterostructures are potentially very interesting from a device standpoint because of improved band gap properties (InAs has a much smaller band gap than GaAs so there is a large band offset at the InGaAs/GaAs interface), and because of the much higher mobility of InAs. However, there is a 7.2% lattice mismatch between InAs and GaAs, so an InxGa1-xAs layer in a GaAs structure with even relatively low x will have a large amount of strain, and misfit dislocations are expected to form above some critical thickness. We attempt here to correlate the effect of misfit dislocations on the electronic properties of this material.The samples we examined consisted of 200Å InxGa1-xAs layered in a hetero-junction bipolar transistor (HBT) structure (InxGa1-xAs on top of a (001) GaAs buffer, followed by more GaAs, then a layer of AlGaAs and a GaAs cap), and a series consisting of a 200Å layer of InxGa1-xAs on a (001) GaAs substrate.

Modification of optical properties of PC-PBT/Cr2O3 and PC-PBT/CdS nanocomposites by gamma irradiation

2020 ◽  
Vol 92 (2) ◽  
pp. 20402
Author(s):  
Kaoutar Benthami ◽  
Mai ME. Barakat ◽  
Samir A. Nouh
Keyword(s):  
Refractive Index ◽  
Optical Properties ◽  
Band Gap ◽  
Color Difference ◽  
Band Gap Energy ◽  
Polybutylene Terephthalate ◽  
Γ Irradiation ◽  
Gap Energy ◽  
Vis Spectroscopy ◽  
Oxygen Atoms

Nanocomposite (NCP) films of polycarbonate-polybutylene terephthalate (PC-PBT) blend as a host material to Cr2O3 and CdS nanoparticles (NPs) were fabricated by both thermolysis and casting techniques. Samples from the PC-PBT/Cr2O3 and PC-PBT/CdS NCPs were irradiated using different doses (20–110 kGy) of γ radiation. The induced modifications in the optical properties of the γ irradiated NCPs have been studied as a function of γ dose using UV Vis spectroscopy and CIE color difference method. Optical dielectric loss and Tauc's model were used to estimate the optical band gaps of the NCP films and to identify the types of electronic transition. The value of optical band gap energy of PC-PBT/Cr2O3 NCP was reduced from 3.23 to 3.06 upon γ irradiation up to 110 kGy, while it decreased from 4.26 to 4.14 eV for PC-PBT/CdS NCP, indicating the growth of disordered phase in both NCPs. This was accompanied by a rise in the refractive index for both the PC-PBT/Cr2O3 and PC-PBT/CdS NCP films, leading to an enhancement in their isotropic nature. The Cr2O3 NPs were found to be more effective in changing the band gap energy and refractive index due to the presence of excess oxygen atoms that help with the oxygen atoms of the carbonyl group in increasing the chance of covalent bonds formation between the NPs and the PC-PBT blend. Moreover, the color intensity, ΔE has been computed; results show that both the two synthesized NCPs have a response to color alteration by γ irradiation, but the PC-PBT/Cr2O3 has a more response since the values of ΔE achieved a significant color difference >5 which is an acceptable match in commercial reproduction on printing presses. According to the resulting enhancement in the optical characteristics of the developed NCPs, they can be a suitable candidate as activate materials in optoelectronic devices, or shielding sheets for solar cells.

Plasmon-assisted interaction of Si with light, for cancer hyperthermia and electromagnetic energy harvest

2020 ◽  
Vol 92 (2) ◽  
pp. 20101
Author(s):  
Behnam Kheyraddini Mousavi ◽  
Morteza Rezaei Talarposhti ◽  
Farshid Karbassian ◽  
Arash Kheyraddini Mousavi
Keyword(s):  
Silicon Nanowires ◽  
Metallic Nanoparticles ◽  
Near Infrared ◽  
Optical Transition ◽  
Electromagnetic Energy ◽  
Energy Harvest ◽  
Absorption Enhancement ◽  
Ir Absorption ◽  
Absorption Mechanism ◽  
Near Ir

Metal-assisted chemical etching (MACE) is applied for fabrication of silicon nanowires (SiNWs). We have shown the effect of amorphous sheath of SiNWs by treating the nanowires with SF6 and the resulting reduction of absorption bandwidth, i.e. making SiNWs semi-transparent in near-infrared (IR). For the first time, by treating the fabricated SiNWs with copper containing HF∕H2O2∕H2O solution, we have generated crystalline nanowires with broader light absorption spectrum, up to λ = 1 μm. Both the absorption and photo-luminescence (PL) of the SiNWs are observed from visible to IR wavelengths. It is found that the SiNWs have PL at visible and near Infrared wavelengths, which may infer presence of mechanisms such as forbidden gap transitions other can involvement of plasmonic resonances. Non-radiative recombination of excitons is one of the reasons behind absorption of SiNWs. Also, on the dielectric metal interface, the absorption mechanism can be due to plasmonic dissipation or plasmon-assisted generation of excitons in the indirect band-gap material. Comparison between nanowires with and without metallic nanoparticles has revealed the effect of nanoparticles on absorption enhancement. The broader near IR absorption, paves the way for applications like hyperthermia of cancer while the optical transition in near IR also facilitates harvesting electromagnetic energy at a broad spectrum from visible to IR.

DISORDER INDUCED DENSITY OF STATES WITHIN THE BAND GAP

1981 ◽  
Vol 42 (C4) ◽  
pp. C4-59-C4-62
Author(s):  
H. Leschke ◽  
B. Kramer
Keyword(s):  
Band Gap ◽  
Density Of States

THE BAND GAP OF GLOW-DISCHARGE-PRODUCED AMORPHOUS SiOx

1981 ◽  
Vol 42 (C4) ◽  
pp. C4-1025-C4-1028 ◽  
Author(s):  
R. Carius ◽  
R. Fischer ◽  
E. Holzenkämpfer
Keyword(s):  
Glow Discharge ◽  
Band Gap
Sign in / Sign up

Export Citation Format

Share Document