scholarly journals Conformation Selectivity and Disharmony of the Lattice Constant Depending on the Guest Size in Clathrate Hydrates

2022 ◽  
Author(s):  
Yusuke Jin ◽  
Masato Kida ◽  
Jiro Nagao
Keyword(s):  
Lattice Constant ◽  
Clathrate Hydrates

Atomic structure of stair rod misfit dislocations at the GaAs on Si(100) interface

1990 ◽  
Vol 48 (4) ◽  
pp. 342-343
Author(s):  
D. Gerthsen
Keyword(s):  
Lattice Constant ◽  
Atomic Structure ◽  
Spherical Aberration ◽  
Stacking Faults ◽  
Misfit Dislocations ◽  
Gaas On Si ◽  
Thermal Expansion Coefficients ◽  
Transmission Electron ◽  
Intersection Line ◽  
Oriented Parallel

The prospect of technical applications has induced a lot of interest in the atomic structure of the GaAs on Si(100) interface and the defects in its vicinity which are often studied by high resolution transmission electron microscopy. The interface structure is determined by the 4.1% lattice constant mismatch between GaAs and Si, the large difference between the thermal expansion coefficients and the polar/nonpolar nature of the GaAs on Si interface. The lattice constant mismatch is compensated by misfit dislocations which are characterized by a/2<110> Burgers vectors b which are oriented parallel or inclined on {111} planes with respect to the interface. Stacking faults are also frequently observed. They are terminated by partial dislocations with b = a/6<112> on {111} planes. In this report, the atomic structure of stair rod misfit dislocations is analysed which are located at the intersection line of two stacking faults at the interface.A very thin, discontinous film of GaAs has been grown by MBE on a Si(100) substrate. Fig.1.a. shows an interface section of a 27 nm wide GaAs island along [110] containing a stair rod dislocation. The image has been taken with a JEOL 2000EX with a spherical aberration constant Cs = 1 mm, a spread of focus Δz = 10 nm and an angle of beam convergence ϑ of 2 mrad.

Effect of the structural changes on the mechanical properties of the sintered films

2016 ◽  
Vol 12 (1) ◽  
pp. 4141-4144
Author(s):  
Garima Jain
Keyword(s):  
Crystallite Size ◽  
Lattice Constant ◽  
Structural Changes ◽  
Structural Investigation ◽  
Energy Gap ◽  
Lattice Parameter ◽  
Metal Chalcogenides ◽  
Optical Energy Gap ◽  
Tin Telluride ◽  
Physical Quantities

Polycrystalline films of tin telluride were prepared by sintering technique. The structural investigation of the films with different thicknesses enables to determine lattice parameter, crystallite size and strain existing in the films. The XRD traces showed that strain was tensile in nature. The crystallite size increases with thickness while strain decreases. Higher the value of tensile strain, larger is the lattice constant. The optical energy gap shows a descending nature with increasing strain and so with the lattice constant. Such an attempt made to delve into interdependence of basic physical quantities helps to explore the properties of SnTe and utilize it as an alternative to heavy metal chalcogenides in various technological applications.  

Lattice-constant variation of the barium4flevel

1980 ◽  
Vol 22 (10) ◽  
pp. 4600-4603 ◽  
Author(s):  
J. F. Herbst
Keyword(s):  
Lattice Constant

scholarly journals Supercontinuum generation in photonic crystal fibers infiltrated with tetrachloroethylene

2021 ◽  
Vol 53 (4) ◽  
Author(s):  
Hieu Van Le ◽  
Van Thuy Hoang ◽  
Hue Thi Nguyen ◽  
Van Cao Long ◽  
Ryszard Buczynski ◽  
...  
Keyword(s):  
Photonic Crystal ◽  
Lattice Constant ◽  
Wavelength Range ◽  
Pump Pulse ◽  
Filling Factor ◽  
Photonic Crystal Fibers ◽  
Fused Silica ◽  
Anomalous Dispersion ◽  
Central Wavelength ◽  
Crystal Fibers

AbstractThis study proposes a photonic crystal fiber made of fused silica glass, with the core infiltrated with tetrachloroethylene (C2Cl4) as a new source of supercontinuum (SC) spectrum. We studied numerically the guiding properties of the several different fiber structures in terms of characteristic dispersion, mode area, and attenuation of the fundamental mode. Based on the results, the structural geometries of three C2Cl4-core photonic crystal fibers were optimized in order to support the broadband SC generations. The first fiber structure with lattice constant 1.5 μm and filling factor 0.4 operates in all-normal dispersion. The SC with a broadened spectral bandwidth of 0.8–2 μm is generated by a pump pulse with a central wavelength of 1.56 μm, 90 fs duration and energy of 1.5 nJ. The second proposed structure, with lattice constant 4.0 μm and filling factor 0.45, performs an anomalous dispersion for wavelengths longer than 1.55 μm. With the same pump pulse as the first fiber, we obtained the coherence SC spectrum in an anomalous dispersion range with wavelength range from 1 to 2 μm. Meanwhile, the third selected fiber (lattice constant 1.5 μm, filling factor 0.55) has two zero dispersion wavelengths at 1.04 μm and 1.82 μm. The octave-spanning of the SC spectrum formed in this fiber was achieved in the wavelength range of 0.7–2.4 μm with an input pulse whose optical properties are 1.03 μm wavelength, 120 fs duration and energy of 2 nJ. Those fibers would be good candidates for all-fiber SC sources as cost-effective alternatives to glass core fibers.

Sign in / Sign up

Export Citation Format

Share Document