Surface Composition of Free Mixed NaCl/Na2SO4 Nanoscale Aerosols Probed by X-ray Photoelectron Spectroscopy

2018 ◽  
Vol 122 (10) ◽  
pp. 2695-2702 ◽  
Author(s):  
E. Antonsson ◽  
C. Raschpichler ◽  
B. Langer ◽  
D. Marchenko ◽  
E. Rühl
Keyword(s):  
Photoelectron Spectroscopy ◽  
Surface Composition ◽  
X Ray

CO2 Reduction to Propanol by Copper Foams: A Pre- and Post-Catalysis Study

2020 ◽  
Author(s):  
Jennifer A. Rudd ◽  
Ewa Kazimierska ◽  
Louise B. Hamdy ◽  
Odin Bain ◽  
Sunyhik Ahn ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Photoelectron Spectroscopy ◽  
Carbon Capture ◽  
Surface Composition ◽  
Co2 Reduction ◽  
Structural Rearrangement ◽  
Copper Electrode ◽  
Ex Situ ◽  
X Ray ◽  
Copper Electrodes

The utilization of carbon dioxide is a major incentive for the growing field of carbon capture. Carbon dioxide could be an abundant building block to generate higher value products. Herein, we describe the use of porous copper electrodes to catalyze the reduction of carbon dioxide into higher value products such as ethylene, ethanol and, notably, propanol. For <i>n</i>-propanol production, faradaic efficiencies reach 4.93% at -0.83 V <i>vs</i> RHE, with a geometric partial current density of -1.85 mA/cm<sup>2</sup>. We have documented the performance of the catalyst in both pristine and urea-modified foams pre- and post-electrolysis. Before electrolysis, the copper electrode consisted of a mixture of cuboctahedra and dendrites. After 35-minute electrolysis, the cuboctahedra and dendrites have undergone structural rearrangement. Changes in the interaction of urea with the catalyst surface have also been observed. These transformations were characterized <i>ex-situ</i> using scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. We found that alterations in the morphology, crystallinity, and surface composition of the catalyst led to the deactivation of the copper foams.

scholarly journals Dual Light- and pH-Responsive Composite of Polyazo-Derivative Grafted Cellulose Nanocrystals

Materials ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 1725 ◽  
Author(s):  
Xiaohong Liu ◽  
Ming Li ◽  
Xuemei Zheng ◽  
Elias Retulainen ◽  
Shiyu Fu
Keyword(s):  
Cellulose Nanocrystals ◽  
Photoelectron Spectroscopy ◽  
Surface Composition ◽  
X Ray Diffraction ◽  
Responsive Materials ◽  
X Ray ◽  
Ph Response ◽  
Transmission Electron ◽  
Ft Ir ◽  
Hexyl Methacrylate

As a type of functional group, azo-derivatives are commonly used to synthesize responsive materials. Cellulose nanocrystals (CNCs), prepared by acid hydrolysis of cotton, were dewatered and reacted with 2-bromoisobuturyl bromide to form a macro-initiator, which grafted 6-[4-(4-methoxyphenyl-azo) phenoxy] hexyl methacrylate (MMAZO) via atom transfer radical polymerization. The successful grafting was supported by Fourier transform infrared spectroscopy (FT-IR) and Solid magnetic resonance carbon spectrum (MAS 13C-NMR). The morphology and surface composition of the poly{6-[4-(4-methoxyphenylazo) phenoxy] hexyl methacrylate} (PMMAZO)-grafted CNCs were confirmed with Transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The grafting rate on the macro-initiator of CNCs was over 870%, and the polydispersities of branched polymers were narrow. The crystal structure of CNCs did not change after grafting, as determined by X-ray diffraction (XRD). The polymer PMMAZO improved the thermal stability of cellulose nanocrystals, as shown by thermogravimetry analysis (TGA). Then the PMMAZO-grafted CNCs were mixed with polyurethane and casted to form a composite film. The film showed a significant light and pH response, which may be suitable for visual acid-alkali measurement and reversible optical storage.

Surface composition and electronic structure of Ni2+xMn1−xGa studied by X-ray photoelectron spectroscopy

2006 ◽  
Vol 600 (18) ◽  
pp. 3749-3752 ◽  
Author(s):  
C. Biswas ◽  
S. Banik ◽  
A.K. Shukla ◽  
R.S. Dhaka ◽  
V. Ganesan ◽  
...  
Keyword(s):  
Electronic Structure ◽  
Photoelectron Spectroscopy ◽  
Surface Composition ◽  
X Ray

scholarly journals Succinic acid in aqueous solution: connecting microscopic surface composition and macroscopic surface tension

2014 ◽  
Vol 16 (39) ◽  
pp. 21486-21495 ◽  
Author(s):  
Josephina Werner ◽  
Jan Julin ◽  
Maryam Dalirian ◽  
Nønne L. Prisle ◽  
Gunnar Öhrwall ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Surface Tension ◽  
Succinic Acid ◽  
Photoelectron Spectroscopy ◽  
Surface Composition ◽  
Md Simulations ◽  
Vapor Interface ◽  
X Ray ◽  
Ph Values ◽  
Microscopic Surface

The water–vapor interface of aqueous solutions of succinic acid, where pH values and bulk concentrations were varied, has been studied using surface sensitive X-ray photoelectron spectroscopy (XPS) and molecular dynamics (MD) simulations.

Effect of Microstructural Characteristics of Electroless Nickel Metallisation on Solderability to Pb-Free Solder Alloys

2005 ◽  
Author(s):  
Changqing Liu ◽  
David A. Hutt ◽  
Dezhi Li ◽  
Paul P. Conway
Keyword(s):  
Photoelectron Spectroscopy ◽  
Surface Composition ◽  
Bulk Composition ◽  
Industrial Process ◽  
Surface Characteristics ◽  
Electroless Nickel ◽  
X Ray ◽  
N2 Atmosphere ◽  
Different Temperatures ◽  
Free Solder

This paper aims to gain an insight into the correlation between the microstructure and surface composition of electroless Ni-P and its behaviour during soldering with Pb free alloys including Sn-3.8Ag-0.7Cu, Sn-3.5Ag and Sn-0.7Cu. Ni-P coatings with different P contents were produced through an industrial process on copper metal substrates. The surface morphology of these coatings was observed by Scanning Electron Microscopy (SEM) and the bulk composition was analyzed by means of Energy Dispersive X-ray analysis (EDX). The mechanical properties of the coatings were evaluated by nano-indentation testing under different maximum loads. However, to understand the behaviour of P in Ni-P coatings and deterioration of the coating surfaces during exposure to air, the surfaces of the coatings were also characterised by X-ray Photoelectron Spectroscopy (XPS) for storage at different temperatures. The dependence of the solderability of Ni-P coatings on the storage time and temperature was investigated by wetting balance testing, using an inactive or active flux with or without an inert N2 atmosphere. Finally, the solderability of Ni-P coatings to Pb free solders is correlated with their composition and microstructure (e.g. surface characteristics).

Carbon Supported Pt+Os Catalysts for Methanol Oxidation

2002 ◽  
Vol 57 (2) ◽  
pp. 193-201 ◽  
Author(s):  
Gülsün Gökağaç ◽  
Brendan J. Kennedy
Keyword(s):  
Methanol Oxidation ◽  
Photoelectron Spectroscopy ◽  
Surface Composition ◽  
Carbon Support ◽  
Methanol Oxidation Reaction ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Metal Metal ◽  
Metal Support

11% Pt/C, 10% Pt + 1%Os/C, 9% Pt + 2%Os/C, 8% Pt + 3%Os/C, 7% Pt + 4%Os/C, 6% Pt + 5%Os/C and 5%Pt + 6% Os/C catalysts have been prepared for methanol oxidation reaction. Transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction and cyclic voltammetry have been used to understand the nature of the species present in these catalysts. 7% Pt + 4% Os/C was the most active catalyst, while 8% Pt + 3% Os/C was the least active one. It is found that the metal particle size and distribution on the carbon support, the surface composition and the oxidation states of the metal particles, the metal-metal and metal support interactions are important parameters to define the activity of the catalyst.

Physical Chemistry of the Interface between Attached Micro-Organisms and Their Support

1990 ◽  
Vol 22 (1-2) ◽  
pp. 1-16 ◽  
Author(s):  
P. G. Rouxhet ◽  
N. Mozes
Keyword(s):  
Photoelectron Spectroscopy ◽  
Bacterial Adhesion ◽  
Surface Composition ◽  
Chemical Properties ◽  
Dlvo Theory ◽  
Support Surface ◽  
X Ray ◽  
Polymer Molecules ◽  
Physico Chemical ◽  
Micro Organisms

The thermodynamic approach of adhesion and DLVO theory are complementary to predict initial bacterial adhesion; the interplay between short- and long-range forces, respectively, may be due to surface roughness. Due to the influence of electrical double layer interactions, adhesion can be promoted by treatments leading to modification of the cell or support surface properties. Adhesion is influenced by cell-cell interactions, by the cpresence of polymer molecules on the surface and by the composition of the medium. X-ray photoelectron spectroscopy can be applied to determine the elemental composition of the surface of microorganisms; some information on the chemical functions can also be obtained. The surface composition is related to physico-chemical properties which play a determining role in adhesion and flocculation, in particular the hydrophobicity and the zeta potential.

X-ray photoelectron spectroscopic analysis of halloysites with different composition and particle morphology

Clay Minerals ◽  
1992 ◽  
Vol 27 (4) ◽  
pp. 413-421 ◽  
Author(s):  
M. Soma ◽  
G. J. Churchman ◽  
B. K. G. Theng
Keyword(s):  
Photoelectron Spectroscopy ◽  
Cation Exchange Capacity ◽  
Spectroscopic Analysis ◽  
Surface Composition ◽  
Particle Morphology ◽  
Exchange Capacity ◽  
Surface Layers ◽  
X Ray ◽  
Fe Content ◽  
Before And After

AbstractThe surface composition of some halloysites with different particle morphology has been investigated by X-ray photoelectron spectroscopy (XPS) before and after removal of external Fe. The Fe(III) 2p3/2 binding energy of external Fe is appreciably smaller than that of structural Fe. Particle morphology is influenced by structural Fe content. The long-tubular halloysite has very little surface Fe, and its concentration tends to increase with the proportion of non-tubular particles in the samples. The spheroidal sample contains the most structural Fe which, however, does not appear to influence particle shape directly. Study by XPS indicates that Fe substitutes for Al in octahedral positions in approximately 1 : 2 proportion. As a result, an increase in octahedral vacancies and cation exchange capacity would be predicted. Further, halloysite layers within a crystal are generally inhomogeneous in composition. Built up like “onion skins”, the surface layers would either be enriched or depleted in Fe depending on the chemical environment in which crystal growth occurs.

scholarly journals Surface Topographical Changes of a Failing Acid-Etched Long-Term in Function Retrieved Dental Implant

2016 ◽  
Vol 42 (1) ◽  
pp. 12-16
Author(s):  
Alberto Monje ◽  
Raúl González-García ◽  
María Coronada Fernández-Calderón ◽  
Margarita Hierro-Oliva ◽  
María Luisa González-Martín ◽  
...  
Keyword(s):  
Dental Implant ◽  
Photoelectron Spectroscopy ◽  
Surface Composition ◽  
Sem Analysis ◽  
Careful Examination ◽  
Acid Etching ◽  
X Ray ◽  
Press Fit ◽  
Scanning Electron

The aim of the present study was to report the main topographical and chemical changes of a failing 18-year in function retrieved acid-etching implant in the micro- and nanoscales. A partially edentulous 45 year old rehabilitated with a dental implant at 18 years of age exhibited mobility. After careful examination, a 3.25 × 13-mm press-fit dental implant was retrieved. Scanning electron microscope (SEM) analysis was carried out to study topographical changes of the retrieved implant compared with an unused implant with similar topographical characteristics. Moreover, X-ray photoelectron spectroscopy (XPS) analysis was used to study the surface composition of the retrieved failing implant. Clear changes related to the dual dioxide layer are present as visible in ≥×500 magnification. In addition, it was found that, for the retrieved implant, the surface composition consisted mainly of Ti2p, O1s, C1s, and Al2p. Also, a meaningful decrease of N and C was noticed, whereas the peaks of Ti2p, Al2p, and O1s increased when analyzing deeper (up to ×2000s) in the sample. It was shown that the superficial surface of a retrieved press-fit dual acid-etched implant 18 years after placement is impaired. However, the causes and consequences for these changes cannot be determined.

Sign in / Sign up

Export Citation Format

Share Document