Selective Adsorption of Rubidium onto a New 1,3-Alternate Calix[4]crown-5 Mesoporous Adsorbent with a Polar Carrier Containing Polyalkyl Ester

2019 ◽  
Vol 65 (1) ◽  
pp. 198-208
Author(s):  
Yuezheng Lyu ◽  
Anyun Zhang ◽  
Yining Wang
Keyword(s):  
Selective Adsorption ◽  
Mesoporous Adsorbent

Atom-probe analysis of the solid-liquid interface

1995 ◽  
Vol 53 ◽  
pp. 676-677
Author(s):  
J.A. Panitz
Keyword(s):  
Molecular Level ◽  
Selective Adsorption ◽  
Electronic Devices ◽  
Atom Probe ◽  
Chemical Agent ◽  
Hostile Environment ◽  
Solid Interface ◽  
Solid Liquid Interface ◽  
Solid Liquid ◽  
Chemically Selective

The first few atomic layers of a solid can form a barrier between its interior and an often hostile environment. Although adsorption at the vacuum-solid interface has been studied in great detail, little is known about adsorption at the liquid-solid interface. Adsorption at a liquid-solid interface is of intrinsic interest, and is of technological importance because it provides a way to coat a surface with monolayer or multilayer structures. A pinhole free monolayer (with a reasonable dielectric constant) could lead to the development of nanoscale capacitors with unique characteristics and lithographic resists that surpass the resolution of their conventional counterparts. Chemically selective adsorption is of particular interest because it can be used to passivate a surface from external modification or change the wear and the lubrication properties of a surface to reflect new and useful properties. Immunochemical adsorption could be used to fabricate novel molecular electronic devices or to construct small, “smart”, unobtrusive sensors with the potential to detect a wide variety of preselected species at the molecular level. These might include a particular carcinogen in the environment, a specific type of explosive, a chemical agent, a virus, or even a tumor in the human body.

Application of iron-coated sand on the treatment of toxic metals

2004 ◽  
Vol 4 (5-6) ◽  
pp. 335-341 ◽  
Author(s):  
Jae-Kyu Yang ◽  
Yoon-Young Chang ◽  
Sung-Il Lee ◽  
Hyung-Jin Choi ◽  
Seung-Mok Lee
Keyword(s):  
Heavy Metals ◽  
Selective Adsorption ◽  
Complete Removal ◽  
Batch Adsorption ◽  
Column Experiments ◽  
Adsorption Behaviour ◽  
Optimum Amount ◽  
Initial Ph ◽  
New Treatment ◽  
Coated Sand

Iron-coated sand (ICS) prepared by using FeCl3 and Joomoonjin sand widely used in Korea was used in this study. In batch adsorption kinetics, As(V) adsorption onto ICS was completed within 20 minutes, while adsorption of Pb(II), Cd(II), and Cu(II) onto ICS was slower than that of As(V) and strongly depended on initial pH. At pH 3.5, ICS showed a selective adsorption of Pb(II) compared to Cd( II) and Cu(II) . However, above pH 4.5, near complete removal of Pb(II), Cd(II), and Cu(II) was observed through adsorption or precipitation depending on pH. As(V) adsorption onto ICS occurred through an anionic-type and followed a Langmuir-type adsorption behaviour. In column experiments, pH was identified as an important parameter in the breakthrough of As(V). As(V) breakthrough at pH 4.5 was much slower than at pH 9 due to a strong chemical bonding between As(V) and ICS as similar with batch adsorption behaviour. With variation of ICS amounts, the optimum amount of ICS at pH 4.5 was identified as 5.0 grams in this research. At this condition, ICS could be used to treat 200 mg of As(V) with 1 kg of ICS until 50 ppb of As(V) appeared in the effluent. In this research, as a new treatment system, ICS can be potentially used to treat As(V) and cationic heavy metals.

Core-Shell Molecularly Imprinted Polymer Nanocomposites for Biomedical and Environmental Applications

2019 ◽  
Vol 25 (34) ◽  
pp. 3633-3644
Author(s):  
Nasrullah Shah ◽  
Saba Gul ◽  
Mazhar Ul-Islam
Keyword(s):  
Food Processing ◽  
Selective Adsorption ◽  
Environmental Applications ◽  
Core Shell ◽  
Template Molecule ◽  
Hollow Core ◽  
Imprinted Polymer ◽  
Adsorption Selectivity ◽  
Molecularly Imprinting Polymers ◽  
Relative Adsorption

: Core-shell polymers represent a class of composite particles comprising of minimum two dissimilar constituents, one at the center known as a core which is occupied by the other called shell. Core-shell molecularly imprinting polymers (CSMIPs) are composites prepared via printing a template molecule (analyte) in the coreshell assembly followed by their elimination to provide the everlasting cavities specific to the template molecules. Various other types of CSMIPs with a partial shell, hollow-core and empty-shell are also prepared. Numerous methods have been reported for synthesizing the CSMIPs. CSMIPs composites could develop the ability to identify template molecules, increase the relative adsorption selectivity and offer higher adsorption capacity. Keen features are measured that permits these polymers to be utilized in numerous applications. It has been developed as a modern technique with the probability for an extensive range of uses in selective adsorption, biomedical fields, food processing, environmental applications, in utilizing the plant's extracts for further applications, and sensors. This review covers the approaches of developing the CSMIPs synthetic schemes, and their application with special emphasis on uses in the biomedical field, food care subjects, plant extracts analysis and in environmental studies.

scholarly journals The formation and constitution of crystals of lead salts containing water-soluble colloid

1935 ◽  
Vol 235 (749) ◽  
pp. 125-164 ◽  
Keyword(s):  
Selective Adsorption ◽  
Water Soluble ◽  
Lead Salts ◽  
The Subject ◽  
As If ◽  
Saturated Solutions

The influence of small amounts of dissolved foreign substances on the growth of crystals from saturated solutions has been the subject of much investigation. Usually the added substances have been electrolytes. Dyestuffs have not been neglected, but with some few exceptions comparatively little attention has been given to the effect of non-ionized water-soluble electrolytes such as gelatine or dextrine. As a rule, the presence of the foreign substances is found to cause the crystals to assume a different habit. Whenever this occurs the absorption must have occurred on certain crystal-faces in preference to others, but, although the added material is active by virtue of its close attachment to such faces, it is rarely found to be incorporated into the solid to any great extent. The growing crystals appear to reject the impurity—thrusting it outwards as the growth advances. The action of water-soluble colloids on the halides and certain other salts of lead is exceptional in several ways. Although when such colloids are present in small concentrations one can generally observe a modification of habit, at higher concentrations there may be little selective adsorption, and the result may be a rounded crystal on which no plane faces at all can be distinguished, as if the forces by which atoms are attracted to the structure had been equalized in every direction.

Proton selective adsorption on Pt–Ni nano-thorn array electrodes for superior hydrogen evolution activity

2021 ◽  
Vol 14 (3) ◽  
pp. 1594-1601
Author(s):  
Adeela Nairan ◽  
Caiwu Liang ◽  
Sum-Wai Chiang ◽  
Yi Wu ◽  
Peichao Zou ◽  
...  
Keyword(s):  
Electric Field ◽  
Hydrogen Evolution ◽  
Selective Adsorption

A superior HER activity was achieved by strong localized electric field induced selected H+ accumulation on the cathode.

scholarly journals Selective adsorption of arsenic over phosphate by transition metal cross-linked chitosan

2021 ◽  
Vol 412 ◽  
pp. 128582
Author(s):  
Lauren N. Pincus ◽  
Predrag V. Petrović ◽  
Isabel S. Gonzalez ◽  
Eli Stavitski ◽  
Zachary S. Fishman ◽  
...  
Keyword(s):  
Transition Metal ◽  
Selective Adsorption

scholarly journals Sulfobetaine Cryogels for Preferential Adsorption of Methyl Orange from Mixed Dye Solutions

Polymers ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 208
Author(s):  
Ramona B. J. Ihlenburg ◽  
Anne-Catherine Lehnen ◽  
Joachim Koetz ◽  
Andreas Taubert
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Methyl Orange ◽  
Dye Removal ◽  
Selective Adsorption ◽  
Water Soluble ◽  
Organic Substances ◽  
Preferential Adsorption ◽  
Dimethyl Ammonium ◽  
Dye Solutions

New cryogels for selective dye removal from aqueous solution were prepared by free radical polymerization from the highly water-soluble crosslinker N,N,N’,N’-tetramethyl-N,N’-bis(2-ethylmethacrylate)-propyl-1,3-diammonium dibromide and the sulfobetaine monomer 2-(N-3-sulfopropyl-N,N-dimethyl ammonium)ethyl methacrylate. The resulting white and opaque cryogels have micrometer sized pores with a smaller substructure. They adsorb methyl orange (MO) but not methylene blue (MB) from aqueous solution. Mixtures of MO and MB can be separated through selective adsorption of the MO to the cryogels while the MB remains in solution. The resulting cryogels are thus candidates for the removal of hazardous organic substances, as exemplified by MO and MB, from water. Clearly, it is possible that the cryogels are also potentially interesting for removal of other compounds such as pharmaceuticals or pesticides, but this must be investigated further.

Sign in / Sign up

Export Citation Format

Share Document