Pilot-Scale Lanthanide Precipitation from Sulfate-Based Spent Ni-MH Battery Leachates: Thermodynamic-Based Choice of Operating Conditions

2021 ◽  
Author(s):  
Margot Zielinski ◽  
Laurent Cassayre ◽  
Nicolas Coppey ◽  
Béatrice Biscans
Keyword(s):  
Pilot Scale ◽  
Operating Conditions ◽  
Mh Battery

Application of a Pilot-Scale Pulsed Electrocoagulation system to OCC-Based Paper Mill Effluent

TAPPI Journal ◽  
2009 ◽  
Vol 8 (3) ◽  
pp. 14-20 ◽  
Author(s):  
YUAN-SHING PERNG ◽  
EUGENE I-CHEN WANG ◽  
SHIH-TSUNG YU ◽  
AN-YI CHANG
Keyword(s):  
Water Quality ◽  
Quality Indicators ◽  
Paper Mill ◽  
Pilot Scale ◽  
Operating Conditions ◽  
Optimal Dosage ◽  
Water Quality Indicators ◽  
Paper Mill Effluent ◽  
Treated Effluent ◽  
True Color

Trends toward closure of white water recirculation loops in papermaking often lead to a need for system modifications. We conducted a pilot-scale study using pulsed electrocoagulation technology to treat the effluent of an old corrugated containerboard (OCC)-based paper mill in order to evaluate its treatment performance. The operating variables were a current density of 0–240 A/m2, a hydraulic retention time (HRT) of 8–16 min, and a coagulant (anionic polyacrylamide) dosage of 0–22 mg/L. Water quality indicators investigated were electrical con-ductivity, suspended solids (SS), chemical oxygen demand (COD), and true color. The results were encouraging. Under the operating conditions without coagulant addition, the highest removals for conductivity, SS, COD, and true color were 39.8%, 85.7%, 70.5%, and 97.1%, respectively (with an HRT of 16 min). The use of a coagulant enhanced the removal of both conductivity and COD. With an optimal dosage of 20 mg/L and a shortened HRT of 10 min, the highest removal achieved for the four water quality indicators were 37.7%, 88.7%, 74.2%, and 91.7%, respectively. The water qualities thus attained should be adequate to allow reuse of a substantial portion of the treated effluent as process water makeup in papermaking.

A pilot web former designed to study retention-formation relationships

2010 ◽  
Vol 25 (2) ◽  
pp. 185-194
Author(s):  
Anna Svedberg ◽  
Tom Lindström
Keyword(s):  
Pilot Scale ◽  
Operating Conditions ◽  
Montmorillonite Clay ◽  
Speed Ratio ◽  
Good Reproducibility ◽  
Total Solids ◽  
Retention Aids ◽  
Solids Content ◽  
Relationship Of ◽  
The Relationship

Abstract A pilot-scale fourdrinier former has been developed for the purpose of investigating the relationship between retention and paper formation (features, retention aids, dosage points, etc.). The main objective of this publication was to present the R-F (Retention and formation)-machine and demonstrate some of its fields of applications. For a fine paper stock (90% hardwood and 10% softwood) with addition of 25% filler (based on total solids content), the relationship between retention and formation was investigated for a microparticulate retention aid (cationic polyacrylamide together with anionic montmorillonite clay). The retention-formation relationship of the retention aid system was investigated after choosing standardized machine operating conditions (e.g. the jet-to-wire speed ratio). As expected, the formation was impaired when the retention was increased. Since good reproducibility was attained, the R-F (Retention and formation)-machine was found to be a useful tool for studying the relationship between retention and paper formation.

Nanofiltration of colored surface water: Quebec's experience

2003 ◽  
Vol 3 (5-6) ◽  
pp. 15-22
Author(s):  
P. Kouadio ◽  
M. Tétrault
Keyword(s):  
Drinking Water ◽  
Surface Water ◽  
Membrane Fouling ◽  
Pilot Scale ◽  
Operating Conditions ◽  
Quebec City ◽  
Water Regulation ◽  
Eastern Canada

Three colored surface water nanofiltration pilot-scale projects were conducted in the province of Quebec (eastern Canada), between November 2000 and March 2002, by the company H2O Innovation (2000) inc., for the municipalities of Lac Bouchette, Latulipe-et-Gaboury and Charlesbourg (now part of Quebec City). Results indicated that nanofiltration permeate quality has an advance on present drinking water regulation standard in Quebec, but important membrane fouling occurred. Fouling can be controlled by pretreatment and optimization of the operating conditions.

scholarly journals Simulation of a Downdraft Gasifier for Production of Syngas from Different Biomass Feedstocks

2021 ◽  
Vol 5 (2) ◽  
pp. 20
Author(s):  
Mateus Paiva ◽  
Admilson Vieira ◽  
Helder T. Gomes ◽  
Paulo Brito
Keyword(s):  
Modeling And Simulation ◽  
Pilot Scale ◽  
Operating Conditions ◽  
Fuel Gas ◽  
Heating Value ◽  
Downdraft Gasifier ◽  
Process Operation ◽  
Independent Parameters ◽  
Gasification Temperature ◽  
Main Operating

In the evaluation of gasification processes, estimating the composition of the fuel gas for different conditions is fundamental to identify the best operating conditions. In this way, modeling and simulation of gasification provide an analysis of the process performance, allowing for resource and time savings in pilot-scale process operation, as it predicts the behavior and analyzes the effects of different variables on the process. Thus, the focus of this work was the modeling and simulation of biomass gasification processes using the UniSim Design chemical process software, in order to satisfactorily reproduce the operation behavior of a downdraft gasifier. The study was performed for two residual biomasses (forest and agricultural) in order to predict the produced syngas composition. The reactors simulated gasification by minimizing the free energy of Gibbs. The main operating parameters considered were the equivalence ratio (ER), steam to biomass ratio (SBR), and gasification temperature (independent variables). In the simulations, a sensitivity analysis was carried out, where the effects of these parameters on the composition of syngas, flow of syngas, and heating value (dependent variables) were studied, in order to maximize these three variables in the process with the choice of the best parameters of operation. The model is able to predict the performance of the gasifier and it is qualified to analyze the behavior of the independent parameters in the gasification results. With a temperature between 850 and 950 °C, SBR up to 0.2, and ER between 0.3 and 0.5, the best operating conditions are obtained for maximizing the composition of the syngas in CO and H2.

Analysis of Vapor Evaporation Loss in Filling Gasoline into Tank

2011 ◽  
Vol 347-353 ◽  
pp. 372-375 ◽  
Author(s):  
Wei Qiu Huang ◽  
Feng Li ◽  
Shu Hua Zhao ◽  
Jing Zhong
Keyword(s):  
Mass Transfer ◽  
Experimental System ◽  
Pilot Scale ◽  
Convective Transport ◽  
Operating Conditions ◽  
Vapor Concentration ◽  
Air Mass ◽  
Evaporation Loss ◽  
Gas Space ◽  
Gasoline Evaporation

A pilot-scale experimental system of filling gasoline into a tank was built to investigate gasoline vapor-air mass transfer in the tank gas space and the vapor evaporation loss from the tank in different operating conditions. The results showed that the higher the location of filling pipe exit inside the tank, the quicker the speed of the filling gasoline, and the higher the initial vapor concentration in the tank gas space, then the more severe the vapor-air convective transport and the larger the gasoline evaporation loss rates.

scholarly journals Performance Evaluation of Tight Ultrafiltration Membrane Systems at Pilot Scale for Agave Fructans Fractionation and Purification

Membranes ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 261
Author(s):  
Noe Luiz-Santos ◽  
Rogelio Prado-Ramírez ◽  
Enrique Arriola-Guevara ◽  
Rosa-María Camacho-Ruiz ◽  
Lorena Moreno-Vilet
Keyword(s):  
Molecular Weight ◽  
Ceramic Membranes ◽  
Pilot Scale ◽  
Operating Conditions ◽  
Polymeric Membrane ◽  
Transmembrane Pressure ◽  
Hydraulic Permeability ◽  
Distribution Analysis ◽  
Permeate Flux ◽  
Membrane Systems

Ceramic and polymeric membrane systems were compared at the pilot scale for separating agave fructans into different molecular weight fractions that help to diversify them into more specific industrial applications. The effect of the transmembrane pressure of ultrafiltration performance was evaluated through hydraulic permeability, permeate flux and rejection coefficients, using the same operating conditions such as temperature, feed concentration and the molecular weight cut-off (MWCO) of membranes. The fouling phenomenon and the global yield of the process were evaluated in concentration mode. A size distribution analysis of agave fructans is presented and grouped by molecular weight in different fractions. Great differences were found between both systems, since rejection coefficients of 68.6% and 100% for fructans with degrees of polymerization (DP) > 10, 36.3% and 99.3% for fructooligosaccharides (FOS) and 21.4% and 34.2% for mono-disaccharides were obtained for ceramic and polymeric membrane systems, respectively. Thus, ceramic membranes are better for use in the fractionation process since they reached a purity of 42.2% of FOS with a yield of 40.1% in the permeate and 78.23% for fructans with DP > 10 and a yield of 70% in the retentate. Polymeric membranes make for an efficient fructan purification process, eliminating only mono-disaccharides, and reaching a 97.7% purity (considering both fructan fractions) with a yield of 64.3% in the retentate.

Pig Wastewater Treatment in Water Hyacinth Ponds

1992 ◽  
Vol 26 (9-11) ◽  
pp. 2381-2384 ◽  
Author(s):  
C. Polprasert ◽  
S. Kessomboon ◽  
W. Kanjanaprapin
Keyword(s):  
Wastewater Treatment ◽  
Water Hyacinth ◽  
Loading Rate ◽  
Pilot Scale ◽  
Operating Conditions ◽  
Cod Removal ◽  
Organic Loading Rate ◽  
Small Scale ◽  
N Removal ◽  
In Series

Small-scale and pilot-scale experiments were conducted on pig wastewater treatment in water hyacinth (Eichhornia crassipesl ponds. The main objectives were to evaluate the treatment performance of the water hyacinth ponds and to determine suitable operating conditions. From the experimental results obtained, the optimum organic loading rate was found to be 200 kg COD/(ha.d), while the hydraulic retention times were proposed to be 10-20 days. The % COD removal in the small-scale water hyacinth ponds were 74-93, while for the pilot-scale ponds the % COD removal were 52-72 because of fluctuations in the influent wastewater characteristics and occasional insect attacks on the water hyacinth leaves and stems. Similar results were obtained for N removal. Although the water hyacinth ponds were found to be feasible for pig wastewater treatment, at least one polishing pond in series should be provided to polish the water hyacinth pond effluents before discharging into the environment.

scholarly journals A Novel Nitrogen Removal Technology Pre-Treating Chicken Manure, Prior to Anaerobic Digestion

2020 ◽  
Vol 12 (18) ◽  
pp. 7463
Author(s):  
Marie E. Kirby ◽  
Muhammad W. Mirza ◽  
James Davies ◽  
Shane Ward ◽  
Michael K. Theodorou
Keyword(s):  
Anaerobic Digestion ◽  
Nitrogen Removal ◽  
Recovery Process ◽  
Pilot Scale ◽  
Operating Conditions ◽  
Chicken Manure ◽  
Nitrogen Recovery ◽  
Biochemical Methane Potential ◽  
Removal Technology ◽  
Methane Potential

Chicken manure is an agricultural by-product that is a problematic feedstock for anaerobic digestion due to its high nitrogen content inhibiting methane yields. This research examines a novel pilot-scale method of ammonia stripping, the nitrogen recovery process (NRP) developed by Alchemy Utilities Ltd. The NRP was designed to remove and recover nitrogen from chicken manure and two different operating conditions were examined. Both operating conditions demonstrated successful nitrogen removal and recovery. The biochemical methane potential assays were used to compare the digestibility of the NRP-treated chicken manures to that of a fresh chicken manure control. Overall, the biochemical methane potential assays demonstrated that some NRP-treated chicken manure treatments produced significantly more methane compared to untreated manure, with no inhibition occurring in relation to ammonium. However, some of the NRP-treated chicken manures produced similar or lower methane yields compared to fresh chicken manure. The NRP requires further development to improve the efficiency of the pilot-scale unit for commercial-scale operation and longer-term continuous anaerobic digestion trials are required to determine longer-term methane yield and ammonium inhibition effects. However, these initial results clearly demonstrate the technology’s potential and novel application for decentralised, on-farm nitrogen recovery and subsequent anaerobic digestion of chicken manure.

Research on Low Concentration Municipal Wastewater Removal Rate with Chemical-Biological Flocculation and Suspended Medium Process

2012 ◽  
Vol 599 ◽  
pp. 387-390
Author(s):  
Xing Yu Bian ◽  
Xing Sheng Kang ◽  
Yi Li ◽  
Yu Lin Sun ◽  
Min Kong ◽  
...  
Keyword(s):  
Municipal Wastewater ◽  
Removal Rate ◽  
Pilot Scale ◽  
Pollutant Removal ◽  
Operating Conditions ◽  
Optimum Operating ◽  
Optimal Operating ◽  
Operational Parameter ◽  
Low Concentration ◽  
Scale Test

In this paper, chemical and biological flocculation and suspended medium process was applied to treat low concentration municipal wastewater in a pilot scale test in order to find the optimum operational parameter. The results showed that: system on pollutant removal mainly on chemical and biological flocculation reaction pool, Under the optimal operating condition, CODCr, TP and SS removal efficiencies reached 75.5％, 76％and 90.5％ respectively, and the CODCr, TP, SS concentrations of effluent meet the National Wastewater Integrated Discharge Standard. The optimum operating conditions according to the local actual situation, running for more than half a year, for the optimization of control parameters for the contrast obtained.

Sign in / Sign up

Export Citation Format

Share Document