Herbicide Spray Penetration into Corn and Soybean Canopies Using Air-Induction Nozzles and a Drift Control Adjuvant

2017 ◽  
Vol 32 (1) ◽  
pp. 72-79 ◽  
Author(s):  
Cody F. Creech ◽  
Ryan S. Henry ◽  
Andrew J. Hewitt ◽  
Greg R. Kruger

AbstractDrift reduction technologies aim to eliminate the smaller droplets that occur with some sprays because these small droplets can move off-target in the wind. Commonly used drift reduction technologies such as air-induction nozzles and spray additives impact on reducing off-target movement is well documented, however, the impact on herbicide penetration into an established crop canopy is not well known. This experiment evaluated the canopy penetration and efficacy of glyphosate treatments applied using four nozzle types (XR11005, AIXR11005, AITTJ11005, and TTI11005), two carrier volume rates (94 and 187 L ha-1), and glyphosate applications with and without a commercial drift reducing adjuvant. Applications were made to corn and soybean fields using glyphosate applied at 1.26 kg ae ha-1with liquid ammonium sulfate at 5% v/v. A rhodamine dye was added (0.025% v/v) to the spray tank of each mixture as a tracer. MylarTMcards were placed in the field above the canopy, in the middle canopy, and on the ground for corn and above and below canopy for soybean. Five cards were at each position in the canopy arranged across the crop row. The addition of a drift reducing adjuvant did not impact canopy penetration. Doubling the carrier volume increased the amount of penetration proportionally and as such the percent reduction was not different. The TTI11005 nozzle had the greatest amount of spray penetration (28%) in the soybean canopies and the XR nozzle had the greatest amount (50%) in the corn canopies. Deposition across the row, beginning in-between the row crop and ending in the row of the crop was 44, 18, and 8% for soybean and 59, 50, and 36% for corn. For both crops, more than half of the herbicide application was captured in the crop canopy. Proper nozzle selection for canopy type can increase herbicide penetration and increasing the carrier volume will increase penetration proportionally.

Pharmaceutics ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 210
Author(s):  
Lise Vandevivere ◽  
Maxine Vangampelaere ◽  
Christoph Portier ◽  
Cedrine de Backere ◽  
Olaf Häusler ◽  
...  

The suitability of pharmaceutical binders for continuous twin-screw wet granulation was investigated as the pharmaceutical industry is undergoing a switch from batch to continuous manufacturing. Binder selection for twin-screw wet granulation should rely on a scientific approach to enable efficient formulation development. Therefore, the current study identified binder attributes affecting the binder effectiveness in a wet granulation process of a highly soluble model excipient (mannitol). For this formulation, higher binder effectiveness was linked to fast activation of the binder properties (i.e., fast binder dissolution kinetics combined with low viscosity attributes and good wetting properties by the binder). As the impact of binder attributes on the granulation process of a poorly soluble formulation (dicalcium phosphate) was previously investigated, this enabled a comprehensive comparison between both formulations in current research focusing on binder selection. This comparison revealed that binder attributes that are important to guide binder selection differ in function of the solubility of the formulation. The identification of critical binder attributes in the current study enables rational and efficient binder selection for twin-screw granulation of well soluble and poorly soluble formulations. Binder addition proved especially valuable for a poorly soluble formulation.


Soil Research ◽  
2004 ◽  
Vol 42 (1) ◽  
pp. 17 ◽  
Author(s):  
K. Müller ◽  
M. Trolove ◽  
T. K. James ◽  
A. Rahman

Runoff potential of 5 herbicides (acetochlor, atrazine, hexazinone, pendimethalin, and terbuthylazine) was evaluated in a small-scale study under simulated rainfall on a cultivated Hamilton clay loam soil. At 24 h after herbicide application, rainfall events of different intensities were simulated to 0.5-m2 field plots with 20% (70, 88, and 111 mm/h) and 30% (60, 70, and 80 mm/h) slope, respectively. The objective of this study was to compare the behaviour of pesticides covering a range of properties under identical hydrodynamic conditions. Sediment amounts and herbicide concentrations were determined in the runoff samples. As the transported sediment amounts were not sufficient for chemical analyses, herbicide residues attached to sediment were estimated using Kd values determined locally for the soil. Whereas pendimethalin concentrations followed no noticeable pattern, the concentrations for the other herbicides were highest in the first runoff samples, and decreased exponentially with further rain. Results show that herbicides were primarily transported in their dissolved form with the exception of pendimethalin. Slope affected cumulative runoff, sediment, and herbicide losses significantly (P < 0.05). The impact of increased rainfall intensity on runoff initiation followed a similar trend, but herbicide losses from plots exposed to different intensities were not always significant. Losses dissolved in runoff from plots with 20% slope were ≤1% of the applied herbicide, whereas on plots with 30% slope the maximum recorded loss was 65%. Here, losses for all herbicides ranged between 1 and 7% at 60 mm/h and 8 and 65% at 80 mm/h. Exports of herbicides with moderate solubility were negatively correlated with their Kd values and their water solubility.


2019 ◽  
Vol 3 (2) ◽  
Author(s):  
T. R. Krause ◽  
E. R. Moore ◽  
J. Duggin ◽  
J. R. Segers ◽  
T. D. Pringle

ObjectivesProfitability in the beef industry has narrow margins regulated by revenue from output traits like growth and carcass merit, but profitability is also largely impacted by input expenses like feed costs. Selecting for improvements in feed efficiency during the finishing phase, one of the most feed intensive segments of the industry, can help to mitigate those input costs. This study compared growth performance, feed efficiency, body composition, and carcass characteristics in Angus steers (n = 321) from bulls divergently selected for feed efficiency and marbling.Materials and MethodsAngus sires were selected based on high (10th percentile or better) and low (85th percentile or worse) residual average daily gain (RADG) EPD as well as high (fifth percentile or better) and average (near 50th percentile) marbling (MARB) EPD. These criteria resulted in a 2 × 2 factorial design with four breeding lines: high RADG/high MARB, high RADG/average MARB, low RADG/high MARB, low RADG/average MARB. Data were analyzed using MIXED procedures of SAS with RADG and MARB as main effects. Significance was set at α = 0.05. Generation was also analyzed, where generation one (GEN1) steers were from a selected sire while generation two (GEN2) steers were from a selected sire and a selected dam.ResultsUltrasound and carcass data revealed no differences (P ≥ 0.12) in 12th rib backfat thickness from weaning through slaughter for the RADG EPD groups. Yield grade and dressing percent did not differ (P ≥ 0.56) across RADG or MARB groups. At the beginning and end of the feeding trial, the high RADG (P ≤ 0.02) group had larger ultrasound ribeye area (REA) than the low RADG group. Carcass REA tended (P = 0.08) to be larger in the high versus low RADG steers. During the feedlot trial and through slaughter, body weight was heavier (P ≤ 0.006) for the high versus low RADG steers but did not differ (P ≥ 0.44) across MARB EPD. Feed efficiency measures did not differ (P ≥ 0.32) across RADG or MARB groups apart from the tendency (P = 0.08) for residual feed intake to be lower in the high versus low RADG steers. Marbling scores differed (P ≤ 0.04) across RADG and MARB groups with the low RADG steers and the high MARB steers having improved marbling. The quality grade distribution across MARB EPD revealed that the average MARB steers graded 73% Choice and 25% Prime while the high MARB steers graded 56% and 42%, respectively. Slice shear force did not differ (P ≥ 0.32) across RADG or MARB EPD. Body weights tended (P = 0.06) to be heavier at the start of the feeding trial for GEN1 versus GEN2 steers. Total gain, average daily gain, and feed to gain (F:G) differed by generation (P ≤ 0.007) with increased rates of gain and reduced F:G in the GEN2 versus GEN1 steers. Body weights did not differ (P = 0.72) across GEN at the end of the feeding trial. Backfat thickness at the start and end of the feedlot phase was less (P ≤ 0.03) and marbling score was improved (P = 0.02) in the GEN2 versus GEN1 steers, respectively.ConclusionThese results suggest that selection using RADG EPD has negligible impacts on meat quality; and that progress in selection for efficiency can be achieved while advancing carcass quality and value. Furthermore, continued divergent selection for feed efficiency and marbling has the potential to improve feed efficiency through advancements in the rate of gain, while enhancing carcass merit through marbling.


2005 ◽  
Vol 2005 ◽  
pp. 17-17
Author(s):  
M. Clapperton ◽  
S. C. Bishop ◽  
N. D. Cameron ◽  
E. J. Glass

Productivity in pigs can be improved by continued selection, however the impact of such selection on immune responses and resistance towards infectious challenges is not known. A risk is that this method may lead to a correlated reduction in the immune response and disease resistance. To estimate the effect of selection for performance traits upon immune responses, we compared levels of immune traits between divergent lines of Large White pigs selected for either lean growth under restricted feeding or feed intake.


2014 ◽  
Vol 60 (No. 12) ◽  
pp. 562-568 ◽  
Author(s):  
V. Brant ◽  
J. Pivec ◽  
K. Hamouzová ◽  
P. Zábranský ◽  
J. Satrapová ◽  
...  

Physiological parameters are sensitive and provide information on the toxicity of herbicides in plants. The impact of herbicide application on plant transpiration was evaluated by the sap flow method during 2009&ndash;2011. The aim of this work was to verify the sap flow method for determining the effect of herbicides on the basis of continuous measurements of the transpiration flow. Helianthus annuus was used as a model plant species. The two different herbicides tested in this study differed by the effect of active ingredients bromoxynil and clopyralid. The water flow was measured using sap flow meter T4.2. The impact of herbicides was assessed by comparing measured transpiration rate (Q) after herbicide application with an extrapolation of transpiration rate of plants before herbicide treatment (Q<sub>calc</sub>). After treatment with bromoxynil the Q values decreased significantly compared to Q<sub>calc</sub>. For plants treated by clopyralid, the decline of actual transpiration (Q) compared with the modelled one (Q<sub>calc</sub>) was less substantial and the plants continued to transpire after the treatment. The effect of herbicides was also verified using infrared gas analyser and chlorophyll fluorescence meter.


Agriculture ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 372
Author(s):  
Lucas Clay ◽  
Katharine Perkins ◽  
Marzieh Motallebi ◽  
Alejandro Plastina ◽  
Bhupinder Singh Farmaha

Cover crops are becoming more accepted as a viable best management practice because of their ability to provide important environmental and soil health benefits. Because of these benefits, many land managers are strongly encouraging the use of cover crops. Additionally, there is limited information on farmers′ perceptions of the benefits and challenges of implementing cover crops. Many farmers state that they do not have enough money or time to implement cover crops. In an attempt to gather more data about the adoption rate and perceptions of cover crops in South Carolina, a survey was sent to 3000 row crop farmers across the state. Farmers were asked whether they implement cover crops and their perceptions of the benefits and challenges associated with implementation. Furthermore, questions were asked regarding the impact of row cropping on their environment to gauge farmer′s education level on environmental impacts. Responses showed many people are implementing cover crops; however, there are still differences in perceptions about benefits and challenges between those who are adopting cover crops and those who are not. This research assesses these differences and aims to provide a baseline for focusing cover crop programs to tackle these certain challenges and promote the benefits.


2013 ◽  
Vol 27 (4) ◽  
pp. 649-655 ◽  
Author(s):  
Catherine P. D. Borger ◽  
Glen P. Riethmuller ◽  
Michael Ashworth ◽  
David Minkey ◽  
Abul Hashem ◽  
...  

PRE herbicides are less effective in the zero-tillage system because of increased residual crop stubble and reduced soil incorporation. However, since weeds are not physically controlled in the zero-tillage system, reliance on efficacy of PRE herbicides is increased. This research investigated the impact of carrier volume and droplet size on the performance of PRE herbicides (in wheat crops at four sites in 2010) to improve herbicide efficacy in conditions of high stubble biomass in zero-tillage systems. Increasing carrier volume from 30 to 150 L ha−1increased spray coverage on water-sensitive paper from an average of 5 to 32%. Average control of rigid ryegrass by trifluralin (at Cunderdin and Merredin sites) and trifluralin or pyroxasulfone (at Wickepin and Esperance sites) improved from 53 to 78% with increasing carrier volume. Use of ASABE Medium droplet size improved spray coverage compared with ASABE Extremely Coarse droplet size, but did not affect herbicide performance. It is clear that increased carrier volume improves rigid ryegrass weed control for nonwater-soluble (trifluralin) and water-soluble (pyroxasulfone) PRE herbicides. Western Australian growers often use low carrier volumes to reduce time of spray application or because sufficient high-quality water is not available, but the advantages of improved weed control justifies the use of a high carrier volume in areas of high weed density.


2017 ◽  
Vol 284 (1851) ◽  
pp. 20162326 ◽  
Author(s):  
Adam Bear ◽  
Ari Kagan ◽  
David G. Rand

How does cognitive sophistication impact cooperation? We explore this question using a model of the co-evolution of cooperation and cognition. In our model, agents confront social dilemmas and coordination games, and make decisions using intuition or deliberation. Intuition is automatic and effortless, but relatively (although not necessarily completely) insensitive to context. Deliberation, conversely, is costly but relatively (although not necessarily perfectly) sensitive to context. We find that regardless of the sensitivity of intuition and imperfection of deliberation, deliberating undermines cooperation in social dilemmas, whereas deliberating can increase cooperation in coordination games if intuition is sufficiently sensitive. Furthermore, when coordination games are sufficiently likely, selection favours a strategy whose intuitive response ignores the contextual cues available and cooperates across contexts. Thus, we see how simple cognition can arise from active selection for simplicity, rather than just be forced to be simple due to cognitive constraints. Finally, we find that when deliberation is imperfect, the favoured strategy increases cooperation in social dilemmas (as a result of reducing deliberation) as the benefit of cooperation to the recipient increases.


Sign in / Sign up

Export Citation Format

Share Document