A Geometric Morphometric Assessment of Hand Shape and Comparison to the 2D:4D Digit Ratio as a Marker of Sexual Dimorphism

2013 ◽  
Vol 16 (2) ◽  
pp. 590-600 ◽  
Author(s):  
Paul G. Sanfilippo ◽  
Alex W. Hewitt ◽  
Jenny A. Mountain ◽  
David A. Mackey

Twin studies are extremely useful for investigating hypotheses of genetic influence on a range of behavioral and physical traits in humans. Studies of physical traits, however, are usually limited to size-related biological characteristics because it is inherently difficult to quantify the morphological counterpart – shape. In recent years, the development of geometry-preserving analytical techniques built upon multivariate statistical methodologies has produced a new discipline in biological shape analysis known as geometric morphometrics. In this study of hand shape analysis, we introduce the reader already familiar with the field of twin research to the potential utility of geometric morphometrics and demonstrate the cross-discipline applicability of methods. We also investigate and compare the efficacy of the 2D:4D ratio, a commonly used marker of sexual dimorphism, to the fully multivariate approach of shape analysis in discriminating between male and female sex. Studies of biological shape variation utilizing geometric morphometric techniques may be completed with software freely available on the Internet and time invested to master the small learning curve in concepts and theory.

Author(s):  
Valentina P. Vetrova ◽  
◽  
Alexey P. Barchenkov ◽  
Nadezhda V. Sinelnikova ◽  
◽  
...  

Geometric morphometric analysis of shape variation in the cone scales of two closely related larch species, Larix dahurica Laws. (=Larix gmelinii (Rupr.) Rupr) and L. cajanderi Mayr, was carried out. The data on the taxonomy and distribution of L. dahurica and L. cajanderi are contradictory. The taxonomic status of L. cajanderi has been confirmed by the genetic and morphological studies performed in Russia and based on considerable evidence, but the species has not been recognized internationally, being considered as a synonym of Larix gmelinii var. gmelinii. In the systematics of larch, morphological characters of the generative organs are mainly used as diagnostic markers, among the most important being the shape variation of the cone scales. The aim of this study was to test geometric morphometrics as a tool for analyzing differentiation of L. dahurica and L. cajanderi in the shape of their cone scales. Characterization of shape variations in cone scales using geometric morphometric methods consists in digitizing points along an outline of scales followed by analysis of partial warps, describing individual differences in coordinates of the outline points. We studied the populations of L. dahurica from Evenkia and the Trans-Baikal region and six L. cajanderi populations from Yakutia and Magadan Oblast. In each population, we analyzed samples of 100-150 cones collected from 20-30 trees. Scales taken from the middle part of the cones were scanned using an Epson Perfection V500 Photo. On the scanned images, outline points were placed with a TPSDig program (Rolf, 2010), using angular algorithm (Oreshkova et al., 2015). The data were processed and analyzed using Integrated Morphometrics Programs (IMP) software (http://www.canisius.edu/~sheets/ morphsoft.html, Sheets, 2001), following the guidelines on geometric morphometrics in biology (Pavlinov, Mikeshina, 2002; Zelditch et al., 2004). Initial coordinates of the scale landmarks were aligned with the mean structure for L. dahurica and L. cajanderi cone scales using Procrustes superimposition in the CoordGen6 program. PCA based on covariances of partial warp scores was applied to reveal directions of variation in the shape of the cone scales. The relative deformations of the cone scales (PCA scores) were used as shape variables for statistical comparisons of these two larch species with canonical discriminant analysis. Morphotypes of the cone scales were distinguished in L. dahurica populations by pairwise comparison of samples from trees in the TwoGroup6h program using Bootstrap resampling-based Goodall’s F-test (Sheets, 2001). Samples from the trees in which the cone scales differed significantly (p < 0.01) were considered to belong to different morphotypes. Morphotypes distinguished in L. dahurica populations were compared with the morphotypes that we had previously determined in L. cajanderi populations. The composition and the frequency of occurrence of morphotypes were used to determine phenotypic distances between populations (Zhivotovskii, 1991). Multidimensional scaling matrix of the phenotypic distances was applied for ordination of larch populations. In this research, we revealed differentiation of L. dahurica and L. cajanderi using geometric morphometric analysis of the shape variation of cone scales. The results of PCA of partial warp scores exposed four principal components, which account for 90% of total explained variance in the shape of the cone scales in the two larch species. Graphical representations of these shape transformations in the vector form characterized directions of shape variability in scales corresponding to the maximum and minimum values of four principal components (See Fig. 2). PCA-ordination of the larch populations revealed some difference in the shape variation of the cone scales in L. dahurica and L. cajanderi (See Fig. 3). The results of canonical discriminant analysis of relative deformations of scales showed differentiation of the populations of the two larch species (See Fig. 4). Eleven morphotypes were identified in L. dahurica cones from Evenkia and nine morphotypes in the Ingoda population, three of the morphotypes being common for both populations (See Fig. 5). The shape of L. dahurica cone scales varied from spatulate to oval and their apical margins from weakly sinuate to distinctly sinuate. The Trans-Baikal population was dominated by scales with obtuse (truncate) and rounded apexes. The obtained morphotypes were compared with 25 cone scale morphotypes previously distinguished in the Yakut and the Magadan L. cajanderi populations (See Fig. 3). Four similar morphotypes of cone scales were revealed in the North-Yeniseisk population of L. dahurica and the Yakut populations of L. cajanderi. The differences between them in the populations of the two larch species were nonsignificant (p > 0.01). All morphotypes of cone scales from the Ingoda population of L. dahurica differed significantly from L. cajanderi cone scale morphotypes. The results of multidimensional scaling phenotypic distance matrix calculated based on the similarity of morphotypes of L. dahurica and L. cajanderi populations were consistent with the results of their differentiation based on relative deformations of scales obtained using canonical discriminant analysis (See Fig. 4 and Fig. 7). In spite of the differences in the shape of the cone scales between the North-Yeniseisk and the Trans-Baikal populations of L. dahurica, they both differed from L. cajanderi populations. Thus, phenotypic analysis confirmed differentiation of these two larch species. Despite the similarities between a number of morphotypes, the Yakut L. cajanderi populations were differentiated from L. dahurica populations. Significant differences were noted between intraspecific groups: between L. cajanderi populations from Okhotsk-Kolyma Upland and Yakutia and between L. dahurica populations from Evenkia and the Trans-Baikal region (See Fig. 4). The similarities between species and intraspecific differences may be attributed to the ongoing processes of hybridization and species formation in the region where the ranges of the larches overlap with the ranges of L. czekanowskii Szafer and L. dahurica×L. cajanderi hybrids. Geometric morphometrics can be used as an effective tool for analyzing differentiation of L. dahurica and L. cajanderi in the shape of their cone scales.


2021 ◽  
Vol 11 (17) ◽  
pp. 7848
Author(s):  
Darío Herranz-Rodrigo ◽  
Silvia J. Tardáguila-Giacomozzi ◽  
Lloyd A. Courtenay ◽  
Juan-José Rodríguez-Alba ◽  
Antonio Garrucho ◽  
...  

Recent studies using geometric morphometrics for taphonomy have yielded interesting results, opening new horizons of research in both archaeological and paleontological sites. Here we present the analysis of tooth pits left by male and female individuals of two different carnivore species (Panthera tigris and Panthera pardus) in order to see if sexual dimorphism influences the morphology of tooth pit marks. In the process, 3D-scanning and applied statistics were used. Based on samples derived from two individuals of different sexes, the present results indicate sexual dimorphism in these felid species to not be a conditioning factor of tooth pit morphology.


2013 ◽  
Vol 6 (1) ◽  
pp. 87-91 ◽  
Author(s):  
Eric Mattson ◽  
Mark C. Belk

Intraspecific morphological variation in fish is typically associated with sexual dimorphism, or one of three common environmental gradients: variation in intensity of predation, variation in water velocity, or variation in feeding niche. The preponderance of examples of environment-associated morphological variation within fish species has been documented in freshwater systems. It is not clear whether environment-associated intraspecific morphological variation is less common in marine fishes or whether there has just been a lack of investigation. We used geometric morphometric analysis to quantify shape variation in two species of South African marine fish commonly harvested for human consumption, Pterogymnus laniarius (panga), and Argyrosomus inodorus (silver kob). Neither species exhibited significant sexual dimorphism, but both species exhibited significant intraspecific morphological variation. This variation appears consistent with patterns expected from variation along the benthic-pelagic feeding niche continuum.


PLoS ONE ◽  
2021 ◽  
Vol 16 (6) ◽  
pp. e0253564
Author(s):  
Leonor Costa Mendes ◽  
Julien Delrieu ◽  
Claudia Gillet ◽  
Norbert Telmon ◽  
Delphine Maret ◽  
...  

The aging process has an impact on mandibular bone morphology and can therefore affect shape sexual dimorphism. Understanding the effect of senescence on mandibular shape changes is particularly important to correctly estimate the sex of an individual and predict age-related conformational modifications. The purpose of this study was to assess age-related changes in mandibular shape and sexual dimorphism. The study sample comprised 160 Multi Slice Computed Tomography examinations of individuals aged 40 to 79 years. Geometric morphometric analysis of fourteen osteometric landmarks was used to examine sexual dimorphism and patterns of mandibular shape variation with age. Results showed that mandibular sexual dimorphism of shape remained significant with aging. Conformational changes occurred between 50 and 70 years and were different for male and female individuals. Females presented earlier and more marked age-related shape changes than males. These observations suggest that mandibular senescence is a sexually dimorphic process since its onset, rate, and the areas subjected to conformational changes differ from male to female individuals. Senescence-related changes present substantial variability, and further investigation is required to determine precisely the age that marks their onset.


Author(s):  
Eva I. Riedlecker ◽  
Gail V. Ashton ◽  
Gregory M. Ruiz

Characteristics of the second gnathopod are traditionally used to distinguish between species of caprellid amphipods. However, these distinctions are often subjective and can be variable within a species. Geometric morphometrics were used to quantitatively assess shape variation of the second gnathopod propodus of three species of caprellids in North America, including the non-native Caprella mutica. Gnathopod shapes of C. mutica specimens from different latitudes revealed distinct morphologies; the factors responsible for the shape variations are unknown. Allometric change of propodus shape was observed in C. mutica. Larger individuals showed a wide array of possible propodus morphologies. Despite this variability, there were clear differences between large specimens of C. mutica and two species native to North America: C. alaskana and C. kennerlyi. The use of geometric morphometrics and the thin-plate spline method can serve to both complement descriptions using traditional keys and aid in identification of non-native species in novel geographical regions.


Insects ◽  
2020 ◽  
Vol 11 (7) ◽  
pp. 451 ◽  
Author(s):  
Tanasak Changbunjong ◽  
Jiraporn Ruangsittichai ◽  
Gerard Duvallet ◽  
Adrian C. Pont

The genus Haematobosca Bezzi, 1907 (Diptera: Muscidae) contains haematophagous flies of veterinary importance. A new fly species of this genus was recognised from northern Thailand based on morphological characters and described as Haematobosca aberrans Pont, Duvallet & Changbunjong, 2020. In the present study, the mitochondrial cytochrome c oxidase I (COI) gene was used to confirm the morphological identification of H. aberrans. In addition, landmark-based geometric morphometrics was used to determine sexual dimorphism. The molecular analysis was conducted with 10 COI sequences. The results showed that all sequences were 100% identical. The sequence was not highly similar to reference sequences from GenBank and did not match any identified species from Barcode of Life Data Systems (BOLD). Phylogenetic analysis clearly differentiated this species from other species within the subfamily Stomoxyinae. For geometric morphometric analysis, a total of 16 wing pictures were analysed using the landmark-based approach. The results showed significant differences in wing shape between males and females, with a cross-validated classification score of 100%. The allometric analysis showed that wing shape has no correlation with size. Therefore, the COI gene is effective in species identification of H. aberrans, and geometric morphometrics is also effective in determining sexual dimorphism.


PeerJ ◽  
2020 ◽  
Vol 8 ◽  
pp. e9359
Author(s):  
Rémi Lefebvre ◽  
Ronan Allain ◽  
Alexandra Houssaye ◽  
Raphaël Cornette

Sauropodomorph dinosaurs constitute a well-studied clade of dinosaurs, notably because of the acquisition of gigantism within this group. The genus Plateosaurus is one of the best-known sauropodomorphs, with numerous remains from various localities. Its tumultuous taxonomic history suggests the relevance of addressing its intrageneric shape variability, mixed with taphonomic modifications of the original bone shape. Here we investigate quantitatively the morphological variation of Plateosaurus occurring at the genus level by studying the shape variation of a sample of limb long bones. By means of 3D geometric morphometrics, the analysis of the uncorrelated variation permits separation of the variation estimated as obviously taphonomically influenced from the more biologically plausible variation. Beyond the dominant taphonomic signal, our approach permits interpretation of the most biologically plausible features, even on anatomical parts influenced by taphonomic deformations. Those features are thus found on a quantitative basis from the variation of samples containing fossil specimens, by taking the impact of taphonomy into account, which is paramount in order to avoid making biologically ambiguous interpretations.


2018 ◽  
Vol 19 (6) ◽  
pp. 2147-2156 ◽  
Author(s):  
MARIYA ALEXANDROVNA CHURSINA ◽  
ALEXANDER BORISOVICH RUCHIN

Chursina MA, Ruchin AB. 2018. A checklist of Bombyliidae (Diptera) from Mordovia, Russia and variation of wing shape in Bombylius species. Biodiversitas 19: 2147-2156. A checklist of Bombyliidae (Diptera) of Republic of Mordovia (Russia) is provided, based on material collected from 2008 to 2017. One hundred ninety specimens from 75 localities were collected. Fourteen of the twenty species are listed as belonging to the fauna for the first time. Intraspecific variation and sexual dimorphism in the wing shape of three species of the genus Bombylius Linnaeus, 1758 were investigated using geometric morphometric techniques. The analysis revealed that wing shape is a good discriminator of the species. In addition, significant sexual dimorphism were found: females of two of the three species had larger wings than males. The sex shape differences consisted mainly of сhanges in the placement of the CuA and A1, while interspecific wing shape variation distributed in more dimensions. There was no evidence for allometric relationships relating to sexual dimorphism and interspecific variation. Potential adaptive significance of interspecific and intersex variation in wing size and shape is discussed.


Author(s):  
Murilo Zanetti Marochi ◽  
Marcelo Costa ◽  
Renata Daldin Leite ◽  
Isis Danniele Cury Da Cruz ◽  
Setuko Masunari

Differences between sexes may arise either during development or at the adult stage only. In both cases growth rate during development and level of allometry may influence sexual dimorphism and ontogenetic trajectories. To analyse the period in which sexual dimorphism appears during ontogeny and assess allometric ontogeny in Sesarmidae crabs, we evaluated: (1) sexual dimorphism in shape and size of the carapace and cheliped propodus of juveniles and adultAratus pisoniiandArmases rubripes, and (2) their ontogenetic trajectory, using geometric morphometric (GM) techniques. We tested the hypothesis that sexual dimorphism in sesarmid crab shape takes place before the puberty moult. InAratus pisoniithere was sexual dimorphism in the shape of the carapace in juveniles (before puberty moult) and variation between juveniles and adults was size-dependent, especially in the frontal region of the carapace. ForArmases rubripesthis shape sexual dimorphism was detected only after the puberty moult (adult phase). For males, carapace variation between juveniles and adults was also size-dependent, especially in the carapace frontal region, but for females, there was a change in shape with different trajectories. Our results also indicated that shape variation is a common pattern during growth for Sesarmidae species. This ontogenetic shape variation may be associated with spatial partitioning between juveniles and adults.


2015 ◽  
Vol 105 (1) ◽  
pp. 76-83 ◽  
Author(s):  
Valeria P. Diawol ◽  
Federico Giri ◽  
Pablo A. Collins

Crustacean growth studies typically use modal analysis rather than focusing on the growth of individuals. In the present work, we use geometric morphometrics to determine how organism shape and size varies during the life of the freshwater crab, Aegla uruguayana Schmitt, 1942. A total of 66 individuals from diverse life cycle stages were examined daily and each exuvia was recorded. Digital images of the dorsal region of the cephalothorax were obtained for each exuvia and were subsequently used to record landmark configurations. Moult increment and intermoult period were estimated for each crab. Differences in shape between crabs of different sizes (allometry) and sexes (sexual dimorphism; SD) were observed. Allometry was registered among specimens; however, SD was not statistically significant between crabs of a given size. The intermoult period increased as size increased, but the moult frequency was similar between the sexes. Regarding ontogeny, juveniles had short and blunt rostrum, robust forehead region, and narrow cephalothorax. Unlike juveniles crabs, adults presented a well-defined anterior and posterior cephalothorax region. The rostrum was long and stylised and the forehead narrow. Geometric morphometric methods were highly effective for the analysis of aeglid-individual- growth and avoided excessive handling of individuals through exuvia analysis.


Sign in / Sign up

Export Citation Format

Share Document