Pattern and frequency reconfigurable antenna with diode loaded ELC resonator

2019 ◽  
Vol 12 (2) ◽  
pp. 163-175 ◽  
Author(s):  
Ghanshyam Singh ◽  
Binod K. Kanaujia ◽  
Vijay K. Pandey ◽  
Deepak Gangwar ◽  
Sachin Kumar
Keyword(s):  
Ring Resonator ◽  
Ground Plane ◽  
Impedance Bandwidth ◽  
Reconfigurable Antenna ◽  
Pin Diodes ◽  
Pattern Diversity ◽  
Low Profile ◽  
Closed Ring ◽  
Multiple Frequencies ◽  
Peak Gain

AbstractIn this work, a new compact, low profile, frequency, and end-fire pattern reconfigurable antenna is presented. The proposed antenna consists of four parasitic elements and an electric-inductive-capacitive (ELC) resonator enclosed with a closed ring resonator (CRR). The reconfigurability in the proposed antenna is achieved with the help of five PIN diodes (D1–D5) embedded on the top surface of the substrate. The diode (D1) is implanted between ELC and CRR resonators for frequency reconfigurability. The other four diodes (D2–D5) are implanted between the ground plane and four parasitic elements to control the electrical length of the ground plane to achieve pattern diversity. The ground plane and parasitic elements steer the primary omni-directional beam to bi-directional and uni-directional end-fire radiation at multiple frequencies. The proposed antenna exhibits multiband operation and end-fire pattern diversity depending upon the different states of PIN diodes. The overall size of the proposed antenna is 0.20λ0× 0.17λ0× 0.009λ0, where λ0 is calculated at the lowest resonance frequency. The impedance bandwidth of the antenna ranges from 1.45 to 26.22%, while peak gain varies from 0.86 to 3.86 dBi depending upon the state of operation. The measured results are in agreement with the simulated results, which confirm the frequency and pattern diversity performance of the antenna. The proposed antenna can be used in back-to-back repeater systems.

High gain low profile wideband dual-layered substrate microstrip antenna based on multiple parasitic elements

2017 ◽  
Vol 10 (4) ◽  
pp. 453-459
Author(s):  
Haixiong Li ◽  
Bozhang Lan ◽  
Jun Ding ◽  
Chenjiang Guo
Keyword(s):  
Reflection Coefficient ◽  
Radiation Pattern ◽  
Microstrip Antenna ◽  
Ground Plane ◽  
High Gain ◽  
Impedance Bandwidth ◽  
Low Profile ◽  
Layered Substrate ◽  
Measured Impedance ◽  
Peak Gain

In this paper, a high gain broadband low profile microstrip antenna with the dual-layered substrate and four parasitic metal elements is presented. The proposed microstrip antenna is mainly composed of four parts: four circular parasitic metal patches with dual arced breaches, a rectangular metal patch sandwiched between substrates, a square ground plane, and two-square substrates. The circular parasitic elements are the main radiation structure and determine the characteristics of the proposed antenna are closely related to the parasitic elements. The proposed antenna has been fabricated for experimental measurement. The reflection coefficient, radiation pattern, radiation efficiency, and gain have been studied in detail. The simulated and measured impedance bandwidth is 27.0% (3.30–4.33 GHz), the maximum realized peak gain reaches up to 6.52 dBi at the frequency of 3.65 GHz. The radiation pattern has a single peak which is perpendicular to the surface of the substrate. The proposed antenna is suitable to be applied in the 5G mobile or WiMAX wireless communication. Dual antenna with a pair of parasitic elements has been investigated numerically to explain the principle of the proposed antenna.

Design of Dual Band Dual Sense Circularly Polarized Wide Slot Antenna with C-shaped Radiator for Wireless Applications

Frequenz ◽  
2018 ◽  
Vol 72 (7-8) ◽  
pp. 343-351 ◽  
Author(s):  
Shilpee Patil ◽  
A. K. Singh ◽  
Binod K. Kanaujia ◽  
R. L. Yadava
Keyword(s):  
Ground Plane ◽  
Axial Ratio ◽  
Dual Band ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Wireless Applications ◽  
Centre Frequency ◽  
Low Profile ◽  
Peak Gain

Abstract A low profile wide slot antenna for dual band and dual sense circular polarization (CP) is proposed here and is simulated by using HFSS simulation software.The proposed antenna having a C shaped patch for dual band operation and a wide square slot etched on the ground with two strips for CP operation. In between radiating patch and ground plane, designed antenna has a layer of easily available dielectric (FR-4) material. Proposed antenna shows an impedance bandwidth of 13.8 % at 2.38 GHz of centre frequency and 9.7 % at 4.43 GHz of centre frequency for lower and upper band respectively. The 3-dB axial ratio (AR) bandwidths for lower and upper band are 18.8 % (at 2.44 GHz of centre frequency) and 13.3 % (at 4.29 GHz of centre frequency), respectively. The peak gain for the lower and upper band is found as 4.1 dBi and 3.3 dBi, respectively. A close agreement has been found between the simulated and the measured results.

scholarly journals CPW-fed circularly-polarized antenna array with high front-to-back ratio and low-profile

Open Physics ◽  
2018 ◽  
Vol 16 (1) ◽  
pp. 651-655 ◽  
Author(s):  
Yilin Liu ◽  
Kama Huang
Keyword(s):  
Antenna Array ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Axial Ratio ◽  
Antenna Design ◽  
Impedance Bandwidth ◽  
Feeding Method ◽  
Circularly Polarized ◽  
Low Profile ◽  
Novel Design

Abstract A novel design of a coplanar waveguide (CPW) feed antenna array with circular polarization (CP) and a high front-to-back ratio is described. The proposed CP array is achieved by using a compact CPW–slotline transition network etched in the ground plane. The measured results show that this kind of feeding method can improve the impedance bandwidth, as well as the axial ratio bandwidth of the CP antenna array and provide adequate gain. The proposed array can achieve a 6.08% impedance bandwidth and a 4.10% CP bandwidth. Details of the antenna design and experimental results are presented and discussed.

Low-profile U-shaped DRA for ultra-wideband applications

2016 ◽  
Vol 9 (3) ◽  
pp. 621-627 ◽  
Author(s):  
Idris Messaoudene ◽  
Tayeb A. Denidni ◽  
Abdelmadjid Benghalia
Keyword(s):  
Dielectric Resonator ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Dielectric Resonator Antenna ◽  
Radiation Patterns ◽  
Wide Bandwidth ◽  
Operating Band ◽  
Low Profile ◽  
Measurement Results

In this paper, a microstrip-fed U-shaped dielectric resonator antenna (DRA) is simulated, designed, and fabricated. This antenna, in its simple configuration, operates from 5.45 to 10.8 GHz. To enhance its impedance bandwidth, the ground plane is first modified, which leads to an extended bandwidth from 4 to 10.8 GHz. Then by inserting a rectangular metallic patch inside the U-shaped DRA, the bandwidth is increased more to achieve an operating band from 2.65 to 10.9 GHz. To validate these results, an experimental antenna prototype is fabricated and measured. The obtained measurement results show that the proposed antenna can provide an ultra-wide bandwidth and a symmetric bidirectional radiation patterns. With these features, the proposed antenna is suitable for ultra-wideband applications.

scholarly journals Frequency reconfigurable monopole antenna with DGS for ISM band applications

2018 ◽  
Vol 69 (4) ◽  
pp. 293-299 ◽  
Author(s):  
Boddapati T. P. Madhav ◽  
Shaik Rajiya ◽  
Badugu P. Nadh ◽  
Munuswami S. Kumar
Keyword(s):  
Dielectric Constant ◽  
Wireless Communication ◽  
Transmission Line ◽  
Ground Plane ◽  
Reconfigurable Antenna ◽  
Pin Diodes ◽  
Microstrip Transmission Line ◽  
Ism Band ◽  
Frequency Reconfigurable Antenna ◽  
Antenna Model

Abstract In this article a compact frequency reconfigurable antenna is presented for wireless communication applications of industrial, scientific and medical band (ISM). The proposed antenna model is designed with the dimensions of 58mm×48 mm on FR4 epoxy of dielectric constant 4.4 with the thickness of 0.8 mm. The proposed antenna consists of defected T-shape ground plane, which acts as a reflector. In the design of frequency reconfigurable antenna, BAR 64-02V PIN diodes are used as switching elements and antenna is fed by microstrip transmission line. The proposed antenna can switch at different frequencies (2.5 GHz, 2.3 GHz and 2.2 GHz) depending on the biasing voltage applied to the PIN diodes. The current antenna showing VSWR < 2 in the operating band and providing peak realized gain of 3.2 dBi. A good matching obtained between expected and the measured results.

scholarly journals Beamwidth-Enhanced Low-Profile Dual-Band Circular Polarized Patch Antenna for CNSS Applications

2019 ◽  
Vol 2019 ◽  
pp. 1-13 ◽  
Author(s):  
Hongmei Liu ◽  
Chenhui Xun ◽  
Shaojun Fang ◽  
Zhongbao Wang
Keyword(s):  
Patch Antenna ◽  
Ground Plane ◽  
Axial Ratio ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Coupled Line ◽  
Low Profile ◽  
Feed Network ◽  
Single Input ◽  
Half Power

A low-profile dual-band circular polarized (CP) patch antenna with wide half-power beamwidths (HPBWs) is presented for CNSS applications. Simple stacked circular patches are used to achieve dual-band radiation. To enhance the HPBW for the two operation bands, a dual annular parasitic metal strip (D-APMS) combined with reduced ground plane (R-GP) is presented. A single-input feed network based on the coupled line transdirectional (CL-TRD) coupler is also proposed to provide two orthogonal modes at the two frequency bands simultaneously. Experimental results show that the 10 dB impedance bandwidth is 32.7%. The 3 dB axial ratio (AR) bandwidths for the lower and upper bands are 4.1% and 6.5%, respectively. At 1.207 GHz, the antenna has the HPBW of 123° and 103° in the xoz and yoz planes, separately. And the values are 127° and 113° at 1.561 GHz.

scholarly journals A frequency reconfigurable antenna with Bluetooth, Wi-Fi and WLAN notch band characteristics

2018 ◽  
Vol 7 (2.7) ◽  
pp. 127 ◽  
Author(s):  
A Vamseekrishna ◽  
B T P Madhav
Keyword(s):  
Dielectric Constant ◽  
Loss Tangent ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Substrate Material ◽  
Reconfigurable Antenna ◽  
Pin Diodes ◽  
Notch Band ◽  
Frequency Reconfigurable Antenna

A compact coplanar waveguide fed reconfigurable antenna with three notch bands are presented in this paper. Proposed antenna reconfigurability is acquired by placing bar6404 PIN diodes in the S-shaped ground plane in right to left mode and left to right mode. By switching the diode, reconfigurability achieved for three different operations. The substrate material for the proposed antenna is FR4 with dielectric constant 4.4 and loss tangent 0.02. The overall dimension of the reconfigurable antenna is around 30×26mm2. It is being observed in this work for the cause of each individual slot on notch band characteristics. The measured gain for the designed reconfigurable antenna is quite stable at operating frequencies except notch bands. The proposed antenna is suitable for practical wideband applications with notching.

scholarly journals Design of a Substrate-Integrated Fabry-Pérot Cavity Antenna forK-Band Applications

2015 ◽  
Vol 2015 ◽  
pp. 1-12 ◽  
Author(s):  
Truong Khang Nguyen ◽  
Ikmo Park
Keyword(s):  
Coplanar Waveguide ◽  
Ground Plane ◽  
Cost Effective ◽  
Frequency Selective Surface ◽  
High Gain ◽  
Hole Array ◽  
Impedance Bandwidth ◽  
Low Profile ◽  
Fabry Perot ◽  
Feeding Structure

This paper presents the design of a planar, low-profile, high-gain, substrate-integrated Fabry-Pérot cavity antenna forK-band applications. The antenna consists of a frequency selective surface (FSS) and a planar feeding structure, which are both lithographically patterned on a high-permittivity substrate. The FSS is made of a circular hole array that acts as a partially reflecting mirror. The planar feeding structure is a wideband leaky-wave slit dipole fed by a coplanar waveguide whose ground plane acts as a perfect reflective mirror. The measured results show that the proposed antenna has an impedance bandwidth of more than 8% (VSWR ≤ 2), a maximum gain of 13.1 dBi, and a 3 dB gain bandwidth of approximately 1.3% at a resonance frequency of around 21.6 GHz. The proposed antenna features low-profile, easy integration into circuit boards, mechanical robustness, and excellent cost-effective mass production suitability.

Compact circularly polarized antenna with wide axial ratio bandwidth using modified quasi-self-complementary structure

2018 ◽  
Vol 11 (1) ◽  
pp. 35-40 ◽  
Author(s):  
Gunjan Srivastava
Keyword(s):  
Ground Plane ◽  
Axial Ratio ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Peak Gain

A compact circularly polarized antenna with wide axial ratio bandwidth (ARBW) using quasi-self-complementary (QSC) structure is presented. A 3-dB ARBW is achieved by shortening the ground plane of the QSC structure. Furthermore, the wide ARBW is obtained by the introduction of a stepped stub in the extended ground plane of the QSC structure. The antenna is fabricated on a FR4 substrate with the overall dimensions of 25 mm × 22 mm × 0.8 mm. The proposed antenna has an impedance bandwidth of 5.9 GHz (2.4–8.3 GHz, 110%) and 3 dB ARBW of 1.6 GHz (2.4–4 GHz, 50%). A peak gain of 1–3 dBi is observed within the 3 dB ARBW.

Sign in / Sign up

Export Citation Format

Share Document