scholarly journals The chemical composition of the atmosphere of Venus

1971 ◽  
Vol 40 ◽  
pp. 3-16 ◽  
Author(s):  
A. P. Vinogradov ◽  
Yu. A. Surkov ◽  
B. M. Andreichikov ◽  
O. M. Kalinkina ◽  
I. M. Grechischeva
Keyword(s):  
Carbon Dioxide ◽  
Water Vapor ◽  
Chemical Composition ◽  
Mixing Ratio ◽  
Temperature Level ◽  
Condensed Water ◽  
Atmosphere Of Venus

The chemical composition sensors on the Venera-4, -5, and -6 spacecraft are described. The mixing ratio by volume of carbon dioxide is determined to be 97 (+3, −4)%; nitrogen, less than 2%, oxygen, less than about 0.1%; and water vapor at the 25 °C temperature level, on the order of 10 mg/l, an amount large enough to imply that the clouds of Venus are composed of condensed water.

Demonstration Measurements of Water Vapor, Cirrus Clouds, and Carbon Dioxide Using a High-Performance Raman Lidar

2007 ◽  
Vol 24 (8) ◽  
pp. 1377-1388 ◽  
Author(s):  
David N. Whiteman ◽  
Kurt Rush ◽  
Igor Veselovskii ◽  
Martin Cadirola ◽  
Joseph Comer ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Boundary Layer ◽  
Water Vapor ◽  
High Performance ◽  
Cirrus Clouds ◽  
Mixing Ratio ◽  
Raman Lidar ◽  
Cloud Optical Depth ◽  
Temporal And Spatial ◽  
Water Vapor Mixing Ratio

Abstract Profile measurements of atmospheric water vapor, cirrus clouds, and carbon dioxide using the Raman Airborne Spectroscopic lidar (RASL) during ground-based, upward-looking tests are presented here. These measurements improve upon any previously demonstrated using Raman lidar. Daytime boundary layer profiling of water vapor mixing ratio up to an altitude of approximately 4 km under moist, midsummer conditions is performed with less than 5% random error using temporal and spatial resolution of 2 min and 60–210 m, respectively. Daytime cirrus cloud optical depth and extinction-to-backscatter ratio measurements are made using a 1-min average. The potential to simultaneously profile carbon dioxide and water vapor mixing ratio through the boundary layer and extending into the free troposphere during the nighttime is also demonstrated.

scholarly journals Composition and Chemistry of the Neutral Atmosphere of Venus

2020 ◽  
Author(s):  
Ann Carine Vandaele
Keyword(s):  
Carbon Dioxide ◽  
Carbon Monoxide ◽  
Water Vapor ◽  
Sulfuric Acid ◽  
Noble Gases ◽  
Trace Gases ◽  
Sulfur Compounds ◽  
Neutral Atmosphere ◽  
Temperature And Pressure ◽  
Atmosphere Of Venus

The atmosphere of Venus is quite different from that of Earth: it is much hotter and denser. The temperature and pressure at the surface are 740 K and 92 atmospheres respectively. Its atmosphere is primarily composed of carbon dioxide (96.5%) and nitrogen (3.5%), the rest being trace gases such as carbon monoxide (CO), water vapor (H2O), halides (HF, HCl), sulfur-bearing species (SO2, SO, OCS, H2S), and noble gases. Sulfur compounds are extremely important in understanding the formation of the Venusian clouds which are believed to be composed of sulfuric acid (H2SO4) droplets. These clouds completely enshroud the planet in a series of layers, extending from 50 to 70 km altitude, and are composed of particles of different sizes and different H2SO4/H2O compositions. These act as a very effective separator between the atmospheres below and above the clouds, which show very distinctive characteristics.

Warm and freeze-fracture of cotton seed radicles

1987 ◽  
Vol 45 ◽  
pp. 984-985
Author(s):  
E. L. Vigil ◽  
E. F. Erbe
Keyword(s):  
Thin Film ◽  
Water Vapor ◽  
Fracture Surface ◽  
Membrane Structure ◽  
Room Temperature ◽  
Freeze Fracture ◽  
Longitudinal Axis ◽  
Fracture Plane ◽  
Cotton Seeds ◽  
Condensed Water

In cotton seeds the radicle has 12% moisture content which makes it possible to prepare freeze-fracture replicas without fixation or cryoprotection. For this study we have examined replicas of unfixed radicle tissue fractured at room temperature to obtain data on organelle and membrane structure.Excised radicles from seeds of cotton (Gossyplum hirsutum L. M-8) were fractured at room temperature along the longitudinal axis. The fracture was initiated by spliting the basal end of the excised radicle with a razor. This procedure produced a fracture through the tissue along an unknown fracture plane. The warm fractured radicle halves were placed on a thin film of 100% glycerol on a flat brass cap with fracture surface up. The cap was rapidly plunged into liquid nitrogen and transferred to a freeze- etch unit. The sample was etched for 3 min at -95°C to remove any condensed water vapor and then cooled to -150°C for platinum/carbon evaporation.

scholarly journals Influencing Factors of the Mineral Carbonation Process of Iron Ore Mining Waste in Sequestering Atmospheric Carbon Dioxide

2021 ◽  
Vol 13 (4) ◽  
pp. 1866
Author(s):  
Noor Allesya Alis Ramli ◽  
Faradiella Mohd Kusin ◽  
Verma Loretta M. Molahid
Keyword(s):  
Carbon Dioxide ◽  
Particle Size ◽  
Chemical Composition ◽  
Iron Ore ◽  
Divalent Cations ◽  
Mining Industry ◽  
Mining Waste ◽  
Aluminum Silicate ◽  
Mineral Carbonation ◽  
Carbonation Process

Mining waste may contain potential minerals that can act as essential feedstock for long-term carbon sequestration through a mineral carbonation process. This study attempts to identify the mineralogical and chemical composition of iron ore mining waste alongside the effects of particle size, temperature, and pH on carbonation efficiency. The samples were found to be alkaline in nature (pH of 6.9–7.5) and contained small-sized particles of clay and silt, thus indicating their suitability for mineral carbonation reactions. Samples were composed of important silicate minerals needed for the formation of carbonates such as wollastonite, anorthite, diopside, perovskite, johannsenite, and magnesium aluminum silicate, and the Fe-bearing mineral magnetite. The presence of Fe2O3 (39.6–62.9%) and CaO (7.2–15.2%) indicated the potential of the waste to sequester carbon dioxide because these oxides are important divalent cations for mineral carbonation. The use of small-sized mine-waste particles enables the enhancement of carbonation efficiency, i.e., particles of <38 µm showed a greater extent of Fe and Ca carbonation efficiency (between 1.6–6.7%) compared to particles of <63 µm (0.9–5.7%) and 75 µm (0.7–6.0%). Increasing the reaction temperature from 80 °C to 150–200 °C resulted in a higher Fe and Ca carbonation efficiency of some samples between 0.9–5.8% and 0.8–4.0%, respectively. The effect of increasing the pH from 8–12 was notably observed in Fe carbonation efficiency of between 0.7–5.9% (pH 12) compared to 0.6–3.3% (pH 8). Ca carbonation efficiency was moderately observed (0.7–5.5%) as with the increasing pH between 8–10. Therefore, it has been evidenced that mineralogical and chemical composition were of great importance for the mineral carbonation process, and that the effects of particle size, pH, and temperature of iron mining waste were influential in determining carbonation efficiency. Findings would be beneficial for sustaining the mining industry while taking into account the issue of waste production in tackling the global carbon emission concerns.

scholarly journals Controlled atmosphere GMAW welding of transportation vehicles and production machines parts made from 30MnB5 steel

2018 ◽  
Vol 216 ◽  
pp. 03001 ◽  
Author(s):  
Evgeny Ivanayskiy ◽  
Aleksei Ishkov ◽  
Aleksandr Ivanayskiy ◽  
Iakov Ochakovskii
Keyword(s):  
Mechanical Properties ◽  
Carbon Dioxide ◽  
Carbon Monoxide ◽  
Chemical Composition ◽  
Controlled Atmosphere ◽  
Shielding Gas ◽  
Reducing Atmosphere ◽  
Metal Composition ◽  
Gmaw Welding ◽  
Welding Materials

The paper studies the influence of shielding gas on the composition and the structure of weld joint metal of 30MnB5 steel applied in essential parts of automobiles and tractors. The welding was performed in inert, oxidizing and reducing atmospheres. It was established that TIG welding with argon used as shielding gas did not provide the required mechanical properties when using conventional welding materials. Carbon dioxide during MAG welding caused partial burning of alloying elements. Carbon monoxide used as shielding gas was proved to form reducing atmosphere enabling to obtain chemical composition close to the base metal composition. Metallographic examinations were carried out. The obtained results provided full-strength weld, as well as the required reliability and durability of welded components and joints.

Carbon dioxide and water vapor fluxes of multi-purpose winter wheat production systems in the U.S. Southern Great Plains

2021 ◽  
Vol 310 ◽  
pp. 108631
Author(s):  
Pradeep Wagle ◽  
Prasanna H. Gowda ◽  
Brian K. Northup ◽  
James P.S. Neel ◽  
Patrick J. Starks ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Water Vapor ◽  
Winter Wheat ◽  
Great Plains ◽  
Production Systems ◽  
Wheat Production ◽  
Southern Great Plains ◽  
The U.S
Sign in / Sign up

Export Citation Format

Share Document