The finite dam

1970 ◽  
Vol 7 (02) ◽  
pp. 316-326 ◽  
Author(s):  
P. B. M. Roes

Denote by X(t) the total quantity of water flowing into a weir of capacity K in the interval (0, t). Unless the weir is empty, there is a continuous release of water at unit rate; if it becomes full, the excess water overflows instantaneously.

1970 ◽  
Vol 7 (3) ◽  
pp. 599-616 ◽  
Author(s):  
P. B. M. Roes

SummaryA weir of capacity K is considered in which the water inflow is a process with stationary independent increments. Unless the weir is empty, there is a continuous release of water at unit rate; if K is finite the weir may become full in which case the excess water overflows instantaneously. A weir for which K is infinite will be referred to as infinite dam. For the latter the transient behaviour is well known if the input possesses a second moment (cf. e.g., Prabhu [7]) and serves as the starting point for the present paper. This result is first extended to yield the Laplace transform (L.T.) of the trivariate Laplace-Stieltjes transform (L.S.T.) of the content v(t) at time t, the input X(t) in (0, t) and the total time d(t) in the interval (0, t) during which the dam is dry. (Incidentally, the last two quantities, for relevant time intervals, will be carried throughout.) Then we use a relation between the latter and the L.S.T. of the expected number of downward level y crossings of the v(t) process established in Roes [9]. Since the dam processes considered are Markov processes, we have therewith the L.S.T. of the renewal function of the renewal process imbedded at level y. From this, one finds the L.S.T.'s of first entrance and taboo first entrance times (for their definition see introduction). Next we calculate the first skip times for the infinite dam from the first entrance times and the L.T. of the L.S.T. of v(t). It is then a routine matter to determine the taboo first skip times. From the (taboo) first entrance and skip times we derive the first entrance times for the finite dam, which in turn lead to the renewal functions of the renewal processes imbedded in the finite dam content process v*(t) and hence to the transient behaviour of the finite dam.The advantage of the present approach over the one given in Roes [8] is that it is entirely probabilistic and avoids involved analytic arguments. As a result, the question of uniqueness of the solution does not arise, while more insight is obtained in the structure. The L.S.T. of several first entrance times and first skip times have been derived by Cohen [2] for compound Poisson input.


1970 ◽  
Vol 7 (03) ◽  
pp. 599-616 ◽  
Author(s):  
P. B. M. Roes

Summary A weir of capacity K is considered in which the water inflow is a process with stationary independent increments. Unless the weir is empty, there is a continuous release of water at unit rate; if K is finite the weir may become full in which case the excess water overflows instantaneously. A weir for which K is infinite will be referred to as infinite dam. For the latter the transient behaviour is well known if the input possesses a second moment (cf. e.g., Prabhu [7]) and serves as the starting point for the present paper. This result is first extended to yield the Laplace transform (L.T.) of the trivariate Laplace-Stieltjes transform (L.S.T.) of the content v(t) at time t, the input X(t) in (0, t) and the total time d(t) in the interval (0, t) during which the dam is dry. (Incidentally, the last two quantities, for relevant time intervals, will be carried throughout.) Then we use a relation between the latter and the L.S.T. of the expected number of downward level y crossings of the v(t) process established in Roes [9]. Since the dam processes considered are Markov processes, we have therewith the L.S.T. of the renewal function of the renewal process imbedded at level y. From this, one finds the L.S.T.'s of first entrance and taboo first entrance times (for their definition see introduction). Next we calculate the first skip times for the infinite dam from the first entrance times and the L.T. of the L.S.T. of v(t). It is then a routine matter to determine the taboo first skip times. From the (taboo) first entrance and skip times we derive the first entrance times for the finite dam, which in turn lead to the renewal functions of the renewal processes imbedded in the finite dam content process v*(t) and hence to the transient behaviour of the finite dam. The advantage of the present approach over the one given in Roes [8] is that it is entirely probabilistic and avoids involved analytic arguments. As a result, the question of uniqueness of the solution does not arise, while more insight is obtained in the structure. The L.S.T. of several first entrance times and first skip times have been derived by Cohen [2] for compound Poisson input.


1970 ◽  
Vol 7 (2) ◽  
pp. 316-326 ◽  
Author(s):  
P. B. M. Roes

Denote by X(t) the total quantity of water flowing into a weir of capacity K in the interval (0, t). Unless the weir is empty, there is a continuous release of water at unit rate; if it becomes full, the excess water overflows instantaneously.


1967 ◽  
Vol 4 (1) ◽  
pp. 151-161 ◽  
Author(s):  
Lajos Takács

We shall consider the following model of finite dams: In the time interval (0, ∞) water is flowing into a dam (reservoir) in accordance with a random process. Denote by χ(u) the total quantity of water flowing into the dam in the time interval (0, u). The capacity of the dam is a finite positive number m. If the dam becomes full, the excess water overflows. If the dam is not empty, there is a continuous release at a constant unit rate. Denote by η(t) the content of the dam at time t.


1967 ◽  
Vol 4 (01) ◽  
pp. 151-161 ◽  
Author(s):  
Lajos Takács

We shall consider the following model of finite dams: In the time interval (0, ∞) water is flowing into a dam (reservoir) in accordance with a random process. Denote by χ(u) the total quantity of water flowing into the dam in the time interval (0, u). The capacity of the dam is a finite positive number m. If the dam becomes full, the excess water overflows. If the dam is not empty, there is a continuous release at a constant unit rate. Denote by η(t) the content of the dam at time t.


1969 ◽  
Vol 6 (01) ◽  
pp. 227-230 ◽  
Author(s):  
R. M. Phatarfod

This paper is concerned with the problem of first emptiness in a continuous time dam model formulated by Gani and Prabhu (1959) based on Moran's (1954) discrete time dam model. Briefly the dam model is as follows: The dam is of finite capacity K, whose content 0 ≦ Z(t) ≦ K is defined in continuous time t (0 ≦ t < ∞) by the equation where ηδt is the time the dam is empty in (t, t + δt). X(t) represents the input into the dam during time t, a Poisson process with parameter λ, such that in a small interval of time δt, the quantity δX(t) = 0 or h (< K) may be added to the dam content; min{Z(t) + δX(t),K} indicates that there will be an overflow whenever Z(t) + δX(t) > K, leaving only the amount K in the dam, and (1-η)δt represents a continuous release occurring at a steady unit rate except when z(t) = 0, when there is no release.


1969 ◽  
Vol 6 (1) ◽  
pp. 227-230 ◽  
Author(s):  
R. M. Phatarfod

This paper is concerned with the problem of first emptiness in a continuous time dam model formulated by Gani and Prabhu (1959) based on Moran's (1954) discrete time dam model. Briefly the dam model is as follows: The dam is of finite capacity K, whose content 0 ≦ Z(t) ≦ K is defined in continuous time t (0 ≦ t < ∞) by the equation where ηδt is the time the dam is empty in (t, t + δt). X(t) represents the input into the dam during time t, a Poisson process with parameter λ, such that in a small interval of time δt, the quantity δX(t) = 0 or h (< K) may be added to the dam content; min{Z(t) + δX(t),K} indicates that there will be an overflow whenever Z(t) + δX(t) > K, leaving only the amount K in the dam, and (1-η)δt represents a continuous release occurring at a steady unit rate except when z(t) = 0, when there is no release.


Author(s):  
J. Hanker ◽  
K. Cowden ◽  
R. Noecker ◽  
P. Yates ◽  
N. Georgiade ◽  
...  

Composites of plaster of Paris (PP) and hydroxylapatite (HA) particles are being applied for the surgical reconstruction of craniofacial bone defects and for cosmetic surgery. Two types of HA particles are being employed, the dense sintered ceramic (DHA) and the porous, coralline hydroxylapatite (PHA) particles. Excess water is expressed out of the moistened HA/PP mixture prior to implantation and setting by pressing it in a non-tapered syringe against a glass plate. This results in implants with faster setting times and greater mechanical strengths. It was therefore of interest to compare samples of the compressed versus noncompressed mixtures to see whether or not any changes in their microstructure after setting could be related to these different properties.USG Medical Grade Calcium Sulfate Hemihydrate (which has the lowest mortar consistency of any known plaster) was mixed with an equal weight of Interpore 200 particles (a commercial form of PHA). After moistening with a minimum amount of water, disc-shaped noncompressed samples were made by filling small holes (0.339 in. diameter x 0.053 in. deep) in polypropylene molds with a microspatula.


In this study, once-daily porosity osmotic pump tablets (POPTs) of Glimepiride were prepared using HPMC K100M (61%), osmotic agent (30% NaCl) coated using two different coating techniques spraying and dipping methods. The coating solution composed of ethyl cellulose (7.5%) w\w in ethanol (90%), castor oil (2%) as water-insoluble plasticizer and Gingo red color (0.5% w\w). In both techniques, the coating level was adjusted to give a 10% increase in the weight of the tablets. The effect of the coating by dipping technique with an increase in the weight of tablet (10 %, 20% & 50%) was also investigated to see the effect coating level on the percentage of drug release from POPTs. The results of the in vitro release of Glimepiride from tablets coated by the spraying method showed longer release time (24 hrs) than those coated with dipping method. On the other hand, increasing the coating level by dipping method retarded the release of the drug from tablets. However, the same retardation effect on release as shown with the spraying technique was only obtained by increasing the coating level with a 50% increase in the weight of the tablet. Thus, coating by spraying is more efficient to prepare POPTs to give a continuous release of Glimepiride from once daily table with the lowest increase in the total weight of the tablet.


2014 ◽  
Vol 1 (4) ◽  
pp. 496-499
Author(s):  
Buchineni Madhavulu ◽  
Pathapati Rama Mohan ◽  
, Devaraju Sreebhushan Raju

Sign in / Sign up

Export Citation Format

Share Document