THE CASTLE OF ACHANDUIN, LISMORE—A POINT OF REFERENCE FOR THE RADIOCARBON ANALYSIS OF MORTAR-ENTRAPPED RELICT LIMEKILN FUELS

Radiocarbon ◽  
2020 ◽  
pp. 1-13
Author(s):  
Mark Thacker

ABSTRACT The results of a short program of landscape, buildings and materials analysis undertaken at Achanduin Castle, Lismore, Scotland (NM 8043 3927) are presented from the pilot phase of the Scottish Medieval Castles & Chapels C14 Project (SMCCCP). The study presents the first independent chronological evidence relating to the construction of this important medieval building, by radiocarbon analysis of a limited assemblage of Mortar-Entrapped Relict Limekiln Fuel (MERLF) fragments. Informed by a wider investigation of structural phasing and sample taphonomy, these measurements are constrained within a series of different Bayesian models, to generate a range of comparative estimates for the building’s constructional chronology. The precision with which the construction of this building can now be dated, from other evidence associated with the site, makes the Achanduin Castle study a useful point of reference for wider materials research.

IUCrJ ◽  
2015 ◽  
Vol 2 (2) ◽  
pp. 292-304 ◽  
Author(s):  
Vanessa K. Peterson ◽  
Christine M. Papadakis

In situandin operandostudies are commonplace and necessary in functional materials research. This review highlights recent developments in the analysis of functional materials using state-of-the-artin situandin operandoX-ray and neutron scattering and analysis. Examples are given covering a number of important materials areas, alongside a description of the types of information that can be obtained and the experimental setups used to acquire them.


2020 ◽  
Vol 149 ◽  
pp. 277-301
Author(s):  
Mark Thacker

A study of Castle Camus is presented from the pilot phase of the Scottish Medieval Castles and Chapels C14 Project (SMCCCP). The study highlights various challenges faced by investigators seeking to interpret medieval sites where contemporary documentary evidence is late and the physical upstanding remains are fragmentary. Informed by a wider programme of buildings and materials analysis, the paper presents the first independent dating evidence relating to the construction of Castle Camus, through radiocarbon analysis of an assemblage of wood-charcoal Mortar-Entrapped Relict Limekiln Fuel (MERLF) fragments. This data is consistent with later traditions, reporting that a MacLeod clan chieftain died at the castle site in the very early 15th century, and suggests Castle Camus was the formal administrative centre of the lordship of Sleat throughout the later medieval period. Bayesian techniques are used to correlate these different types of evidence and generate an estimate for the constructional chronology of the earliest upstanding structure. The study suggests that construction of the south-east range at Castle Camus was completed in 1280–1330 cal AD (74.2% probability) or 1365–1400 cal AD (21.2% probability). Further discussion highlights the landscape context of the castle site; with a focus on woodland resources and socially constructed boundaries. View supplementary material here   Canmore ID 11544


Author(s):  
Charles W. Allen

High voltage TEMs were introduced commercially thirty years ago, with the installations of 500 kV Hitachi instruments at the Universities of Nogoya and Tokyo. Since that time a total of 51 commercial instruments, having maximum accelerating potentials of 0.5-3.5 MV, have been delivered. Prices have gone from about a dollar per volt for the early instruments to roughly twenty dollars per volt today, which is not so unreasonable considerinp inflation and vastly improved electronics and other improvements. The most expensive HVEM (the 3.5 MV instrument at Osaka University) cost about 5 percent of the construction cost of the USA's latest synchrotron.Table 1 briefly traces the development of HVEM in this country for the materials sciences. There are now only three available instruments at two sites: the 1.2 MeV HVEM at Argonne National Lab, and 1.0 and 1.5 MeV instruments at Lawrence Berkeley National Lab. Fortunately, both sites are user facilities funded by DOE for the materials research community.


2013 ◽  
Vol 21 (1) ◽  
pp. 24-33 ◽  
Author(s):  
Anne Eschen ◽  
Franzisca Zehnder ◽  
Mike Martin

This article introduces Cognitive Health Counseling 40+ (CH.CO40+), an individualized intervention that is conceptually based on the orchestration model of quality-of-life management ( Martin & Kliegel, 2010 ) and aims at improving satisfaction with cognitive health in adults aged 40 years and older. We describe the theoretically deduced characteristics of CH.CO40+, its target group, its multifactorial nature, its individualization, the application of subjective and objective measures, the role of participants as agents of change, and the rationale for choosing participants’ satisfaction with their cognitive health as main outcome variable. A pilot phase with 15 middle-aged and six older adults suggests that CH.CO40+ attracts, and may be particularly suitable for, subjective memory complainers. Implications of the pilot data for the further development of the intervention are discussed.


2020 ◽  
Vol 7 (2) ◽  
pp. 72-78
Author(s):  
Adnan Al Farisi ◽  
Yopi Handoyo ◽  
Taufiqur Rokhman

The One of alternative energy that is environmentally friendly is by untilize water energy and turn it into a Microhydro power plant. Microhydro power plant usually made from utilize the waterfall with the head fell. While utilization for streams with a head small drop is not optimal yet. This is a reference to doing research on harnessing the flow of a river that has a value of head low between 0.7 m – 1.4 m with turning it into a Vortex flow (vortex). The purpose of this research is to know  the effect variation number of blade on power and efficiency in the vortex turbine. This research uses experimental methods to find current, voltage, torque and rpm using a reading instrument. The materials research vortex turbine used 6 blade, 8 blade and 10 blade with flat plate. The result showed the highest efficiency is 29,93 % with produce turbine power is 19,58 W, generated on turbine with variation 10 blade with load 3,315 kg and the capacity of water 10,14 l/s. Followed with an efficiency 24,17% and produce turbine power is 15,81 W, generated on turbine with the variation 8 blade with load 3,315 kg and the capacity of water is 10,14 l/s. The the lowest turbine efficiency 22,32% with produce tuebine power 14,60 W, generated on turbine with the variation 6 blade with load 3,315 kg, the capacity of water is 10,14 l/s.


Sign in / Sign up

Export Citation Format

Share Document