scholarly journals Release of 14C and 3H from Irradiated Graphite of the Thermal Column of VVR-S Reactor to Solution Phase

Radiocarbon ◽  
2018 ◽  
Vol 60 (6) ◽  
pp. 1831-1837 ◽  
Author(s):  
Viorel Fugaru ◽  
Cristian Postolache ◽  
George Bubueanu ◽  
Catalin Tuta
Keyword(s):  
Reactor Core ◽  
Point Of View ◽  
Solution Phase ◽  
Fuel Cladding ◽  
Time Prediction ◽  
Irradiated Graphite ◽  
Thermal Column ◽  
Activation Products ◽  
Long Time

ABSTRACTGenerally, 14C is produced in all types of reactors, mainly through neutron-induced reactions with isotopes of carbon, nitrogen, and oxygen. These isotopes are present in the fuel, fuel cladding, coolant, moderator, and structural materials of the reactor. Irradiated graphite contains a range of activation products but, from the point of view of geological disposal, another radionuclide which has to be taken into account is tritium (3H or T), produced through the neutron induced reaction Li(n,α)T. In this study we have investigated the release of 14C and 3H into the solution phase from two intact samples of irradiated graphite which have been cut from the thermal column disc located near the VVR-S reactor core. To evaluate 14C and 3H long-term release in solution the graphite samples were submerged in a solution of 0.1 M of sodium hydroxide. The experimental results regarding the release of 14C and 3H from VVR-S irradiated graphite to liquid phase show that a major fraction of the total release occurs in the first months and a slower release on a long time scale. However, these results should be applied cautiously for long time prediction.

scholarly journals Differenziali geografici di sviluppo

2013 ◽  
Author(s):  
Francesco Dini
Keyword(s):  
Twentieth Century ◽  
Economic Development ◽  
Formation Process ◽  
Political Economics ◽  
The State ◽  
Point Of View ◽  
Human Behaviour ◽  
Long Time ◽  
Geographical Point

Geographical differentials of development derive from regional specializations. As classical political economics advised, they are what actively or passively create, and each one with more or less intensity, inter-regional commerce and the nations' different capacities to produce wealth. It is not only through categories of the economy that this capacity can be interpreted: equally as salient factors are the eco-system conditions, cultures and the state formation process. But it is true that the market for a long time has been the form of organization of human behaviour aimed at creating surplus within which this capacity is expressed, distinctly takes shape and gradually builds different pictures from that, since the second half of the twentieth century, usually defined as «economic development». The different capacity of places to produce wealth, in the same way as regional specializations, is indeed subject to endless evolution; the process is long term, very long term, and is characterized by clear but changing geographical regularities, within which moments of accelerated change can yet also be seen. By observing it from a geographical point of view, this work tries to fit the pieces back together, starting from the advent of so-called «capitalism» and going onto look at the logic and rules of the current configurations.

scholarly journals Mass Transfer Behavior and Microstructure Evolution of Li4TiO4-Li2TiO3 Core-shell Breeding Ceramic Under Harsh Operating Conditions

2021 ◽  
Author(s):  
Ruichong Chen ◽  
Kazunari Katayama ◽  
Jianqi Qi ◽  
Akito Ipponsugi ◽  
Ran Oyama ◽  
...  
Keyword(s):  
Mass Transfer ◽  
Mass Loss ◽  
Point Of View ◽  
Operating Conditions ◽  
Heating Process ◽  
Core Shell ◽  
Tritium Breeding ◽  
Long Time ◽  
Transfer Behavior

Abstract The development of novel tritium breeding materials was urgently needed in order to continuously optimize the tritium breeding ratio (TBR) of thermonuclear fusion reactors. From this point of view, Li4TiO4-Li2TiO3 core-shell breeding materials with more reasonable structure and theoretical Li density of 0.464 g/cm3 were prepared in this work. Notably, the mass transfer experiment at 900 °C in 1% H2/Ar shows that the theoretical Li density of this core-shell material after heating for 30 days was significantly higher than that of other breeding materials, indicating that it can provide more stable and efficient TBR. Specifically, the Li mass loss of the sample after 30 days heating was 3.4%, resulting in a decrease of Li density to 0.415 g/cm3. The mechanism of Li mass loss in Li4TiO4-Li2TiO3 core-shell breeding materials was investigated in detail. Moreover, the samples did not crack or collapse during the long-term heating process, and always maintained a satisfactory crushing load, revealing that this core-shell breeding ceramic can be used for a long time under severe operating conditions.

scholarly journals Welfare Aspects of Raising Entire Male Pigs and Immunocastrates

Animals ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 2140
Author(s):  
Eberhard Borell ◽  
Michel Bonneau ◽  
Mirjam Holinger ◽  
Armelle Prunier ◽  
Volker Stefanski ◽  
...  
Keyword(s):  
Environmental Enrichment ◽  
Scientific Literature ◽  
Point Of View ◽  
Current Status ◽  
Climate Control ◽  
Housing Systems ◽  
Group Stability ◽  
Long Time ◽  
Entire Male

For a long time, scientists assumed that newborns have a severely limited sense of pain (if any). However, this assumption is wrong and led to a “start of the exit” from piglet surgical castration. Some of the currently discussed or already implemented alternatives such as general or local anaesthesia during surgical castration raise additional welfare concerns as well as legal problems and/or are hardly applicable. The favoured long-term, welfare-friendly “gold standard” is to raise entire male pigs (EM). However, this may also impose certain welfare problems under the current conventional housing and management conditions. The specific types of behaviour displayed by EM such as mounting and aggressive behaviours but also increased exploration, which are partially linked to sexual maturation, increase the risk for injuries. The current status of knowledge (scientific literature and farmer experiences) on housing of EM suggests that environmental enrichment, space, group-stability, social constellation, feeding (diet and feeder space), health and climate control are critical factors to be considered for future housing systems. From an animal welfare point of view, an intermediate variant to be favoured to reduce problematic behaviour could be to slaughter EM before reaching puberty or to immunize boars early on to suppress testicular function. Immunization against endogenous GnRH can reduce EM-specific problems after the 2nd vaccination.

scholarly journals Aspects Regarding the Energy Security in the Middle East

2017 ◽  
Vol 22 (2) ◽  
pp. 85-93
Author(s):  
Ionuţ Alin Cîrdei
Keyword(s):  
Middle East ◽  
Energy Security ◽  
Transport Process ◽  
Point Of View ◽  
Oil Price ◽  
Energy Resources ◽  
Middle East Countries ◽  
Long Time

Abstract Ensuring energy security is a concern for all the world’s countries. For a long time, the issue of energy security has been looked at from the point of view of ensuring the energy resources necessary for the functioning of the economy and society and, implicitly, from the perspective of reducing dependence on imported energy resources. In reality, however, energy security must also be addressed from the perspective of states with energy resources, as their security can be jeopardized by disturbances that may occur during the operation or transport process or due to lower prices. Middle East countries, rich in energy resources, are currently vulnerable due to global oil price declines and instability and conflict in the region. This vulnerability may affect the supply of energyconsuming states and their energy security in the medium and long term, and not only.

Enhancing the power generation of Rhodopseudomonas palustris-based MFC

2020 ◽  
Vol 64 (1-4) ◽  
pp. 1261-1268
Author(s):  
Shu Otani ◽  
Dang-Trang Nguyen ◽  
Kozo Taguchi
Keyword(s):  
Activated Carbon ◽  
Rhodopseudomonas Palustris ◽  
Ozone Treatment ◽  
Maximum Power Density ◽  
On Demand ◽  
Long Time ◽  
Dry Conditions ◽  
Carbon Sheet ◽  
Uv Ozone

In this study, a portable and disposable paper-based microbial fuel cell (MFC) was fabricated. The MFC was powered by Rhodopseudomonas palustris bacteria (R. palustris). An activated carbon sheet-based anode pre-loaded organic matter (starch) and R. palustris was used. By using starch in the anode, R. palustris-loaded on the anode could be preserved for a long time in dry conditions. The MFC could generate electricity on-demand activated by adding water to the anode. The activated carbon sheet anode was treated by UV-ozone treatment to remove impurities and to improve its hydrophilicity before being loaded with R. palustris. The developed MFC could generate the maximum power density of 0.9 μW/cm2 and could be preserved for long-term usage with little performance degradation (10% after four weeks).

Selective statistical estimates of multi-year monthly concentrations of biogenous pollution of small rivers of the Northwest zone of the Russian Federation

2020 ◽  
pp. 9-13
Author(s):  
Sergey Kovalenko
Keyword(s):  
Statistical Processing ◽  
Point Of View ◽  
Small Rivers ◽  
Statistical Parameters ◽  
Monthly Data ◽  
Statistical Estimates ◽  
Scientific Task ◽  
The Russian Federation ◽  
Agricultural Areas

The management of surface watercourses is an urgent scientific task. The article presents the results of statistical processing of long-term monthly data of field observations of hydrological and hydrochemical parameters along the Upper Yerga small river in the Vologda region. Sampling estimates of statistical parameters are obtained, autocorrelation and correlation analyzes are performed. The limiting periods from the point of view of pollution for water receivers receiving wastewater from drained agricultural areas are identified.

Masonry: the brittle or plastic material?

2019 ◽  
pp. 22-28
Keyword(s):  
Plastic Material ◽  
Experimental Studies ◽  
Point Of View ◽  
Plastic Properties ◽  
Plastic Deformations ◽  
Base Materials ◽  
Stress States ◽  
Creep Deformations ◽  
Structural Point

The results of experimental studies of masonry on the action of dynamic and static (short-term and long-term) loads are presented. The possibility of plastic deformations in the masonry is analyzed for different types of force effects. The falsity of the proposed approach to the estimation of the coefficient of plasticity of masonry, taking into account the ratio of elastic and total deformations of the masonry is noted. The study of the works of Soviet scientists revealed that the masonry under the action of seismic loads refers to brittle materials in the complete absence of plastic properties in it in the process of instantaneous application of forces. For the cases of uniaxial and plane stress states of the masonry, data on the coefficient of plasticity obtained from the experiment are presented. On the basis of experimental studies the influence of the strength of the so-called base materials (brick, mortar) on the bearing capacity of the masonry, regardless of the nature of the application of forces and the type of its stress state, is noted. The analysis of works of prof. S. V. Polyakov makes it possible to draw a conclusion that at the long application of the load, characteristic for the masonry are not plastic deformations, but creep deformations. It is shown that the proposals of some authors on the need to reduce the level of adhesion of the mortar to the brick for the masonry erected in earthquake-prone regions in order to improve its plastic properties are erroneous both from the structural point of view and from the point of view of ensuring the seismic resistance of structures. It is noted that the proposal to assess the plasticity of the masonry of ceramic brick walls and large-format ceramic stone with a voidness of more than 20% is incorrect, and does not meet the work of the masonry of hollow material. On the basis of the analysis of a large number of research works it is concluded about the fragile work of masonry.

Adjustable wetting of Liquid Flame Spray (LFS) TiO2-nanoparticle coated board: Batch-type versus roll-to-roll stimulation methods

2014 ◽  
Vol 29 (2) ◽  
pp. 271-279 ◽  
Author(s):  
Mikko Tuominen ◽  
Hannu Teisala ◽  
Janne Haapanen ◽  
Mikko Aromaa ◽  
Jyrki M. Mäkelä ◽  
...  
Keyword(s):  
Argon Plasma ◽  
Ultra Violet ◽  
High Volume ◽  
Point Of View ◽  
Flame Spray ◽  
Ambient Conditions ◽  
Batch Type ◽  
Roll To Roll ◽  
Long Time ◽  
Liquid Flame Spray

Abstract Superhydrophobic nanoparticle coating was created on the surface of board using liquid flame spray (LFS). The LFS coating was carried out continuously in ambient conditions without any additional hydrophobization steps. The contact angle of water (CAW) of ZrO2, Al2O3 and TiO2 coating was adjusted reversibly from >150° down to ~10−20° using different stimulation methods. From industrial point of view, the controlled surface wetting has been in focus for a long time because it defines the liquid-solid contact area, and furthermore can enhance the mechanical and chemical bonding on the interface between the liquid and the solid. The used stimulation methods included batch-type methods: artificial daylight illumination and heat treatment and roll-to-roll methods: corona, argon plasma, IR (infra red)- and UV (ultra violet)-treatments. On the contrary to batch-type methods, the adjustment and switching of wetting was done only in seconds or fraction of seconds using roll-to-roll stimulation methods. This is significant in the converting processes of board since they are usually continuous, high volume operations. In addition, the creation of microfluidic patterns on the surface of TiO2 coated board using simple photomasking and surface stimulation was demonstrated. This provides new advantages and possibilities, especially in the field of intelligent printing. Limited durability and poor repellency against low surface tension liquids are presently the main limitations of LFS coatings.

Integrating Focusing and Differentiation: A Therapeutic Path for Couples in Intimate Relationships

2018 ◽  
Vol 3 ◽  
Author(s):  
Evi Zohar
Keyword(s):  
Couples Therapy ◽  
Therapeutic Potential ◽  
Well Being ◽  
Point Of View ◽  
The Body ◽  
Self Awareness ◽  
Emotional Healing ◽  
Felt Sense ◽  
Inner World

Continuing the workshop I've given in the WPC Paris (2017), this article elaborates my discussion of the way I interlace Focusing with Differentiation Based Couples Therapy (Megged, 2017) under the systemic view, in order to facilitate processes of change and healing in working with intimate couples. This article presents the theory and rationale of integrating Differentiation (Bowen, 1978; Schnarch, 2009; Megged, 2017) and Focusing (Gendlin, 1981) approaches, and its therapeutic potential in couple's therapy. It is written from the point of view of a practicing professional in order to illustrate the experiential nature and dynamics of the suggested therapeutic path. Differentiation is a key to mutuality. It offers a solution to the central struggle of any long term intimate relationship: balancing two basic life forces - the drive for individuality and the drive for togetherness (Schnarch, 2009). Focusing is a body-oriented process of self-awareness and emotional healing, in which one learns to pay attention to the body and the ‘Felt Sense’, in order to unfold the implicit, keep it in motion at the precise pace it needs for carrying the next step forward (Gendlin, 1996). Combining Focusing and Differentiation perspectives can cultivate the kind of relationship where a conflict can be constructively and successfully held in the inner world of each partner, while taking into consideration the others' well-being. This creates the possibility for two people to build a mutual emotional field, open to changes, permeable and resilient.

Charlemagne’s Health in ‘Old Age’: Did It Affect Carolingian Military Strategy?

Mediaevistik ◽  
2020 ◽  
Vol 32 (1) ◽  
pp. 11-53
Author(s):  
Bernard S. Bachrach
Keyword(s):  
Old Age ◽  
The Political ◽  
Military Strategy ◽  
The West ◽  
Long Time

During the first thirty-three years of his reign as king of the Franks, i.e., prior to his coronation as emperor on Christmas day 800, Charlemagne, scholars generally agree, pursued a successful long-term offensive and expansionist strategy. This strategy was aimed at conquering large swaths of erstwhile imperial territory in the west and bringing under Carolingian rule a wide variety of peoples, who either themselves or their regional predecessors previously had not been subject to Frankish regnum.1 For a very long time, scholars took the position that Charlemagne continued to pursue this expansionist strategy throughout the imperial years, i.e., from his coronation on Christmas Day 800 until his final illness in later January 814. For example, Louis Halphen observed: “comme empereur, Charles poursuit, sans plus, l’oeuvre entamée avant l’an 800.”2 F. L. Ganshof, who also wrote several studies treating Charlemagne’s army, was in lock step with Halphen and observed: “As emperor, Charlemagne pursued the political and military course he had been following before 25 December 800.”3

Sign in / Sign up

Export Citation Format

Share Document