scholarly journals Preliminary analysis of gaseous radiocarbon behavior in a geological repository hosted in salt rock

Radiocarbon ◽  
2018 ◽  
Vol 60 (6) ◽  
pp. 1897-1910
Author(s):  
Riccardo Levizzari ◽  
Barbara Ferrucci ◽  
Alfredo Luce
Keyword(s):  
Distribution Coefficients ◽  
High Level Waste ◽  
Preliminary Evaluation ◽  
Salt Rock ◽  
Irradiated Graphite ◽  
Geological Repository ◽  
And Migration ◽  
Italian Context ◽  
High Level ◽  
The Impact

ABSTRACTA preliminary evaluation of gaseous radiocarbon (14C) behavior under geological repository conditions for Italian radioactive high level waste-long-lived and intermediate level waste disposal has been performed. Although in Italy there is still no defined project for a geological disposal facility, current work may support future safety assessment studies for a hypothetical future repository in deep salt rock. In the Italian context of radioactive waste, the percentage of 14C bearing waste to be disposed in a possible geological repository is low; irradiated graphite is the most important radiological source. Data about the radiological inventory has been collected to simulate production and migration of gaseous 14C in a hypothetical geological repository. Three different conceptual models have been developed and simulated. The first model has considered a preliminary evaluation of the radiological impact referred to the whole inventory; the second and third model have evaluated the impact only due to the irradiated graphite. A preliminary sensitivity analysis has been carried out, highlighting the importance of geometry and of distribution coefficients (Kd) in materials used to seal the disposal underground facility. Results show the possibility to correlate the Kd values, the volume and the location of the sealing materials to the amount of 14C migrating toward the surface.

scholarly journals Temperature and tortuosity effect on gas migration in a high-level waste disposal tunnel

2015 ◽  
Vol 79 (6) ◽  
pp. 1317-1325 ◽  
Author(s):  
D. Justinavicius ◽  
P. Poskas
Keyword(s):  
Initial Temperature ◽  
Computer Code ◽  
Hydrogen Gas ◽  
High Level Waste ◽  
Gas Migration ◽  
Geological Repository ◽  
High Level ◽  
Clay Formation ◽  
Corrosion Of Steel ◽  
The Impact

AbstractCorrosion of steel canisters, disposed of in a repository for high-level waste (HLW), leads to generation of hydrogen gas for a long period after the repository's closure. The accumulation of hydrogen gas may lead to significant desaturation and unacceptable build-up of pressure in the backfilled disposal tunnels if the gas cannot escape through the low-permeability host rock. Consequently, the investigation of gas migration is of high relevance in the assessment of the repository's performance.In this paper, the results of numerical investigations on gas migration performed using the computer code TOUGH2 (USA) are presented. The objective was to investigate migration of gas generated in a single disposal tunnel of a conceptual geological repository in a clay formation, which was suggested for benchmark studies in the European Commission project FORGE (Fate Of Repository GasEs). The analysis was focused on evaluation of the impact of an initial temperature in the repository and of different tortuosity models on gas migration. It was revealed that gas migration results were dependent on tortuosity model, while temperature variation in the repository had minor impact.

CAREM X INPRO Case Study

2004 ◽  
Author(s):  
Pablo C. Florido ◽  
Dari´o Delmastro ◽  
Daniel Brasnarof ◽  
Osvaldo E. Azpitarte
Keyword(s):  
Nuclear Reactor ◽  
Fuel Cycle ◽  
High Level Waste ◽  
Fuel Cycles ◽  
Surface Intermediate ◽  
Geological Repository ◽  
Enriched Uranium ◽  
Intermediate Storage ◽  
High Level

Argentina is performing CAREM X Nuclear System Case Study based on CAREM nuclear reactor and Once Through Fuel Cycle, using SIGMA for enriched uranium production, and a deep geological repository for final disposal of high level waste after surface intermediate storage in horizontal natural convection silos, to verify INPRO (International Project on Innovative Nuclear Reactors and Fuel Cycles) methodology. Projections show that developing countries could play a crucial role in the deployment of nuclear energy, in the next fifty years. This case study will be highly useful for checking INPRO methodology for this scenario. In this contribution to ICONE 12, the preliminary findings of the Case Study are presented, including proposals to improve the INPRO methodology.

scholarly journals Assessment of the impact of selected changes in the deep geological repository model on its long-term safety

2020 ◽  
Vol 225 ◽  
pp. 06012
Author(s):  
Dorota Flamíková ◽  
Vladimír Nečas
Keyword(s):  
Effective Dose ◽  
Annual Effective Dose ◽  
Monitoring Program ◽  
Distribution Coefficients ◽  
Exposure Group ◽  
Deep Geological Repository ◽  
Adult Individual ◽  
Geological Repository ◽  
The Impact

The deep geological repository system provides long-term protection against the undesirable effects of ionizing radiation on the population and the environment. An important part of the long-term safety strategy is development of a monitoring program that collects information about the behaviour of the deep geological repository throughout its whole lifetime. A simplified model of the disposal system, geosphere, and biosphere was developed using the GoldSim simulation tool to demonstrate the behaviour of the hypothetical deep geological repository located in crystalline rocks. Also an initial model of the reference biosphere was created based on the scenario of an agricultural habitation (normal evolution scenario) and it was developed based on the recommendations provided in the BIOMASS methodology. After a significant period of time, disposal containers will be degraded and evolution changes in the repository system will occur. Several important parameters appear in the annual effective dose calculation for an individual from critical exposure group within the reference biosphere model. One of them are, for example, distribution coefficients and so-called translocation factors that define the transported rate of released radionuclides into the environment. This paper provides a view into the selected part of the deep geological repository through the data obtained by monitoring during the selected period of time. Simulations describing changes in the repository system. The aim of this contribution is to evaluate the impact of selected changes on the annual effective dose for an adult individual from a critical exposure group while it is assumed, that the respondent consumes contaminated crops and animal products. This model includes various biosphere components and multiple exposure pathways such as inhalation, ingestion and external exposure.

scholarly journals Reactive transport calculations to evaluate sulphide fluxes in the near-field of a SF/HLW repository

2019 ◽  
Vol 98 ◽  
pp. 10005
Author(s):  
Marek Pękala ◽  
Paul Wersin ◽  
Veerle Cloet ◽  
Nikitas Diomidis
Keyword(s):  
Reactive Transport ◽  
Spent Nuclear Fuel ◽  
Near Field ◽  
Opalinus Clay ◽  
High Level Waste ◽  
Waste Containment ◽  
Geological Repository ◽  
High Level ◽  
Reducing Bacteria ◽  
Hlw Repository

Radioactive waste is planned to be disposed in a deep geological repository in the Opalinus Clay (OPA) rock formation in Switzerland. Cu coating of the steel disposal canister is considered as potential a measure to ensure complete waste containment of spent nuclear fuel (SF) and vitrified high-level waste (HLW) or a period of 100,000 years. Sulphide is a potential corroding agent to Cu under reducing redox conditions. Background dissolved sulphide concentrations in pristine OPA are low, likely controlled by equilibrium with pyrite. At such concentrations, sulphide-assisted corrosion of Cu would be negligible. However, the possibility exists that sulphate reducing bacteria (SRB) might thrive at discrete locations of the repository’s near-field. The activity of SRB might then lead to significantly higher dissolved sulphide concentrations. The objective of this work is to employ reactive transport calculations to evaluate sulphide fluxes in the near-field of the SF/HLW repository in the OPA. Cu canister corrosion due to sulphide fluxes is also simplistically evaluated.

scholarly journals State-of-the-art and proof-of-concept installations for repository concepts based in crystalline rock

2015 ◽  
Vol 79 (6) ◽  
pp. 1665-1673 ◽  
Author(s):  
Magnus Kronberg ◽  
Jan Gugala ◽  
Keijo Haapala
Keyword(s):  
Laser Scanning ◽  
Crystalline Rock ◽  
High Level Waste ◽  
Geological Disposal ◽  
Geological Repository ◽  
Reference Design ◽  
Potential Alternative ◽  
Deep Underground ◽  
High Level

AbstractOver the last five decades private and national energy programmes worldwide have been producing a variety of radioactive wastes. One of the safest ways of disposing of this waste is to bury it deep underground in purpose-built geological disposal facilities. Currently, there is no operating geological repository in Europe for high-level waste but the goal of the IGD-TP is that the first repository shall be fully operational before the year 2025. Several studies and experiments are ongoing at various potential repository sites in Europe with the goal to establish general approaches that can be adapted for any country in need of a geological repository.The Swedish Nuclear Fuel and Waste Management Co (SKB) in Sweden and Posiva Oy in Finland are developing a method for geological disposal of high-level long-lived nuclear waste in crystalline rock, the KBS-3 method. KBS-3V (vertical) is both organizations reference design, but KBS-3H (horizontal) emplacement is also being researched as a potential alternative. Of high importance in the development is demonstrating the technical feasibilityin situof safe and reliable construction, manufacturing, disposal and sealing of such geological disposal facilities. Parts of these demonstrations are carried out under the framework of EurAtom/FP7 and one of these projects is the LUCOEX project where SKB is demonstrating horizontal emplacement, the Multi Purpose Test (MPT), and Posiva is demonstrating vertical buffer installation processes.The MPT includes the key components of the horizontal design and comprises all essential steps; manufacturing of the full-scale components, their assembly, installation in the drift and monitoring of the early buffer evolution. The MPT installation was successfully performed in late 2013. By combining the components, an initial verification of the design implementation has been achieved. At the same time, integrating the components has meant the recognition of some design weaknesses and the design will be updated accordingly.Posiva's KBS-3V buffer installation equipment that places buffer blocks with high precision in vertical deposition holes is currently being developed and will be tested during 2014 and 2015 in real underground conditions. The machine uses vacuum lifting tools for moving the buffer blocks and laser scanning technology to position both the machine and blocks. Functionality of the concept and equipment selected will be confirmed by the tests and the installation tests will provide important information about the suitability of the selected buffer dimensions and tolerances.

Simultaneous resolution of reactive radioactive decay, non-isothermal flow, and migration with application to the performance assessment for HLW repositories

2010 ◽  
Vol 98 (6) ◽  
Author(s):  
R. Juncosa ◽  
I. Font ◽  
J. Delgado
Keyword(s):  
Ion Exchange ◽  
Radioactive Decay ◽  
Chemical Species ◽  
High Level Waste ◽  
Chemical Components ◽  
Clay Material ◽  
Decay Series ◽  
And Migration ◽  
High Level ◽  
Radioactive Species

AbstractRadioactive decay is an important subject to take into account when studying the thermo-hydro-dynamic behavior of the buffer clay material used in the containment of radioactive waste. The modern concepts for the multibarrier design of a repository of high level waste in deep geologic formations consider that once canisters have failed, the buffer clay material must ensure the retention and/or delay of radionuclides within the time framework given in the assessment studies. Within the clay buffer, different chemical species are retarded/fixed according to several physicochemical processes (ion exchange, surface complexation, precipitation, matrix diffusion, ...) but typical approaches do not consider the eventuality that radioactive species change their chemical nature (The radioactive decay of an element takes place independently of the phase (aqueous, solid or gaseous) to which it belongs. This means that, in terms of radionuclide fixation, some geochemical processes will be effective scavengers (for instance mineral precipitation of crystal growth) while others will not (for instance ion exchange and/or sorption).In this contribution we present a reactive radioactive decay model of any number of chemical components including those that belong to decay series. The model, which is named FLOW-DECAY, also takes into account flow and isotopic migration and it has been applied considering a hypothetical model scenario provided by the project ENRESA 2000 and direct comparison with the results generated by the probabilistic code GoldSim. Results indicate that FLOW-DECAY may simulate the decay processes in a similar way that GoldSim, being the differences related to factors associated to code architecture.

scholarly journals Development of a ceramic waste form for high-level waste disposal

1999 ◽  
Vol 556 ◽  
Author(s):  
D. W. Esh ◽  
K. M. Goff ◽  
K. T. Hirsche ◽  
T. J. Battisti ◽  
M. F. Simpson ◽  
...  
Keyword(s):  
Spent Nuclear Fuel ◽  
National Laboratory ◽  
Argonne National Laboratory ◽  
Fission Products ◽  
Waste Form ◽  
High Level Waste ◽  
Durability Test ◽  
Ceramic Waste ◽  
High Level ◽  
The Impact

AbstractA ceramic waste form is being developed by Argonne National Laboratory* (ANL) as part of the demonstration of the electrometallurgical treatment of spent nuclear fuel [1]. The halide, alkaline earth, alkali, transuranic, and rare earth fission products are stabilized in zeolite which is combined with glass and processed in a hot isostatic press (HIP) to form a ceramic composite. The mineral sodalite is formed in the HIP from the zeolite precursor. The process, from starting materials to final product, is relatively simple. An overview of the processing operations is given. The metrics that have been developed to measure the success or completion of processing operations are developed and discussed. The impact of variability in processing metrics on the durability of the final product is presented. The process is demonstrated to be robust for the type and range of operation metrics considered and the performance metric (PCT durability test) against which the operation metrics are evaluated.

Impact of Advanced Fuel Cycles on Geological Disposal

2009 ◽  
Vol 1193 ◽  
Author(s):  
Jan Marivoet ◽  
Eef Weetjens
Keyword(s):  
Radioactive Waste ◽  
Cooling Time ◽  
High Level Waste ◽  
Waste Streams ◽  
Geological Disposal ◽  
Fuel Cycles ◽  
Thermal Output ◽  
Advanced Fuel ◽  
High Level ◽  
The Impact

AbstractIn recent years the increasing oil prices and the need for carbon-free energy to limit global warming have resulted in a revival of interests in nuclear energy. Advanced nuclear fuel cycles are being studied worldwide. They aim at making more efficient use of the available resources, reducing the risk of proliferation of nuclear weapons, and facilitating the management of the resulting radioactive waste. Recently, the Red-Impact project has investigated the impact of a number of representative advanced fuel cycles on radioactive waste management, and more specific on geological disposal. The thermal output of the high-level waste arising from advanced fuel cycles in which all the actinides are recycled is reduced with a factor 3 for a 50 years cooling time and with a factor 5 for a 100 years cooling time in comparison with the spent fuel arising from the once-through fuel cycle. This reduction of the thermal output allows for a significant reduction of the length of the disposal galleries and of the size of the repository. Separation of Cs and Sr drastically reduces further the thermal output of the high-level waste, but it requires a long-term management of those heat generating separated waste streams, which contain the very long-lived 135Cs. Recycling all the actinides strongly reduces the radiotoxicity in the waste, resulting in significantly lower doses to an intruder in the case of a human intrusion into the repository. However, the reduction of radiotoxicity has little impact on the main safety indicator of a geological repository, i.e. the effective dose in the case of the expected evolution scenario; for disposal in clay formations, this dose is essentially due to mobile fission and activation products. The deployment of advanced fuel cycles will necessitate the development of low activation materials for the new nuclear facilities and fuels and of specific waste matrices to condition the high-level and medium-level waste streams that will arise from the advanced reprocessing plants.

Sign in / Sign up

Export Citation Format

Share Document