Flow and Heat Transfer of Gold-Blood Nanofluid in a Porous Channel with Moving/Stationary Walls

2016 ◽  
Vol 33 (3) ◽  
pp. 395-404 ◽  
Author(s):  
S. Srinivas ◽  
A. Vijayalakshmi ◽  
A. Subramanyam Reddy
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Rate ◽  
Analytical Solutions ◽  
Transfer Rate ◽  
Numerical Solutions ◽  
Volume Fraction ◽  
Porous Channel ◽  
Nanoparticle Volume Fraction ◽  
Similarity Transformations ◽  
Flow And Heat Transfer

AbstractThe present study investigates the flow and heat transfer characteristics of blood carrying gold nanoparticles in a porous channel with moving/stationary walls in the presence of thermal radiation. Blood is considered as Newtonian fluid which is the base fluid and gold (Au) as nanoparticles. The governing equations are transformed into system of ordinary differential equations by using similarity transformations. The analytical solutions are obtained for the flow variables by employing homotopy analysis method (HAM). The analytical solutions are compared with the numerical solutions which are obtained by shooting technique along with Runge-Kutta scheme. It was noticed that there is a good agreement between analytical and numerical results. The influence of various parameters on velocity, temperature and heat transfer rate of gold-blood nanofluid has been discussed in detail. The temperature of the nanofluid increases with increasing the nanoparticle volume fraction. The heat transfer rate at the top wall increases with increasing nanoparticle volume fraction while it decreases for a given increase in radiation parameter.

A Study on Hydromagnetic Pulsating Flow of a Nanofluid in a Porous Channel With Thermal Radiation

2016 ◽  
Vol 33 (2) ◽  
pp. 213-224 ◽  
Author(s):  
A. Vijayalakshmi ◽  
S. Srinivas
Keyword(s):  
Heat Transfer ◽  
Titanium Dioxide ◽  
Thermal Radiation ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Volume Fraction ◽  
Porous Channel ◽  
Nanoparticle Volume Fraction ◽  
Governing Equations ◽  
Nanofluid Flow

AbstractThe present study investigates the hydromagnetic pulsating nanofluid flow in a porous channel with thermal radiation. In this work, we considered water as the base fluid and silver (Ag), copper (Cu), alumina (Al2O3) and titanium dioxide (TiO2) as nanoparticles. The Maxwell-Garnetts and Brinkman models are used to evaluate the effective thermal conductivity and viscosity of the nanofluid. The governing equations are solved analytically and the influence of various parameters on velocity, temperature and heat transfer rate has been discussed through graphical results. From the results, it is found that the rate of heat transfer enhances with an increase of nanoparticle volume fraction. Further, the heat transfer rate is higher for silver nanoparticles as compared with copper, alumina and titanium dioxide.

scholarly journals Assisted convective heat transfer and entropy generation in a solar collector filled with nanofluid

2016 ◽  
Vol 13 (2) ◽  
pp. 135-150
Author(s):  
R. Nasrin ◽  
M.A. Alim ◽  
M. Hasanuzzzaman
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Rate ◽  
Entropy Generation ◽  
Solar Collector ◽  
Transfer Rate ◽  
Volume Fraction ◽  
Bulk Temperature ◽  
Outlet Temperature ◽  
Nanoparticle Volume Fraction ◽  
Collector Efficiency

Heat transfer phenomena of flat plate solar collector filled with different nanofluids has been investigated numerically. Galerkin’s Finite Element Method is used to solve the problem. Heat transfer rate, average bulk temperature, average sub-domain velocity, outlet temperature, thermal efficiency, mean entropy generation and Bejan number has been investigated by varying the solid nanoparticle volume fraction of water/Cu, water/Ag and water/Cu/Ag nanofluids from 0% to 3%. It is found that the solid nanoparticle volume fraction has great effect on heat transfer phenomena. It is observed that the increases of the solid volume fraction (up to 2%) enhances the heat transfer rate and collector efficiency where after 2% the rate of change almost constant. Higher heat transfer rate and collector efficiency has been obtained 19% and 13% for water/Ag nanofluid respectively.

scholarly journals Numerical Study of Natural Convection Heat Transfer in a Porous Annulus Filled with a Cu-Nanofluid

Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 990
Author(s):  
Lingyun Zhang ◽  
Yupeng Hu ◽  
Minghai Li
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Volume Fraction ◽  
Convection Heat Transfer ◽  
Darcy Number ◽  
Radius Ratio ◽  
Natural Convection Heat Transfer ◽  
Nanoparticle Volume Fraction ◽  
Convection Heat

Natural convection heat transfer in a porous annulus filled with a Cu nanofluid has been investigated numerically. The Darcy–Brinkman and the energy transport equations are employed to describe the nanofluid motion and the heat transfer in the porous medium. Numerical results including the isotherms, streamlines, and heat transfer rate are obtained under the following parameters: Brownian motion, Rayleigh number (103–105), Darcy number (10−4–10−2), nanoparticle volume fraction (0.01–0.09), nanoparticle diameter (10–90 nm), porosity (0.1–0.9), and radius ratio (1.1–10). Results show that Brownian motion should be considered. The nanoparticle volume fraction has a positive effect on the heat transfer rate, especially with high Rayleigh number and Darcy number, while the nanoparticle diameter has an inverse influence. The heat transfer rate is enhanced with the increase of porosity. The radius ratio has a significant influence on the isotherms, streamlines, and heat transfer rate, and the rate is greatly enhanced with the increase of radius ratio.

scholarly journals A Weibull Distribution: Flow and Heat Transfer of Nanofluids Containing Carbon Nanotubes with Radiation and Velocity Slip Effects

2020 ◽  
Vol 2020 ◽  
pp. 1-9
Author(s):  
Izamarlina Asshaari ◽  
Alias Jedi ◽  
Kafi Dano Pati
Keyword(s):  
Heat Transfer ◽  
Carbon Nanotubes ◽  
Thermal Radiation ◽  
Weibull Distribution ◽  
Skin Friction ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Volume Fraction ◽  
Moving Plate ◽  
Flow And Heat Transfer

In this study, the Tiwari and Das model is numerically studied, in case of a moving plate containing both single-walled and multiwalled carbon nanotubes (SWCNTs and MWCNTs, respectively), in the presence of thermal radiation and the slip effect. Employing the similarity transformation, a set of 2nd-order partial differential equations (which are used to model the flow and heat transfer) are solved numerically using the boundary value problem with 4th-order accuracy (BVP4C) method. The effects of related parameters, such as the volume fraction of nanoparticles, moving, slip, and radiation parameter on the heat transfer performance are analysed and discussed. Results indicate that a unique solution was placed when the plate travels in assisting flow conditions. Additionally, as the nanoparticle volume fraction (φ) rises at φ = 0.2, the skin friction and heat transfer rate decrease. It is also observed that when the slip parameter (β) increases at β = 0.4, the skin friction decreases, whereas the heat transfer rate increases. Meanwhile, the heat transfer rate decreases when the thermal radiation (NR) increases to 0.7. Moreover, it is found that the SWCNTs are more efficient when the skin friction coefficient and the Nusselt number are considered. It is found that the Weibull distribution is more suitable in fitting the skin friction data.

scholarly journals Effect of Variable Fluid Properties on Natural Convection of Nanofluids in a Cavity with Linearly Varying Wall Temperature

2015 ◽  
Vol 2015 ◽  
pp. 1-13 ◽  
Author(s):  
M. Bhuvaneswari ◽  
Poo Balan Ganesan ◽  
S. Sivasankaran ◽  
K. K. Viswanathan
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Effective Thermal Conductivity ◽  
Heat Transfer Rate ◽  
Wall Temperature ◽  
Transfer Rate ◽  
Effective Viscosity ◽  
Numerical Solutions ◽  
Volume Fraction ◽  
Left Wall

The present study analyzed convective heat transfer and fluid flow characteristics of nanofluid in a two-dimensional square cavity under different combinations of thermophysical models of nanofluids. The right vertical wall temperature is varying linearly with height and the left wall is maintained at low temperature whereas the horizontal walls are adiabatic. Finite volume method is used to solve the governing equations. Two models are considered to calculate the effective thermal conductivity of the nanofluid and four models are considered to calculate the effective viscosity of the nanofluid. Numerical solutions are carried out for different combinations of effective viscosity and effective thermal conductivity models with different volume fractions of nanoparticles and Rayleigh numbers. It is found that the heat transfer rate increases for Models M1 and M3 on increasing the volume fraction of the nanofluid, whereas heat transfer rate decreases for Model M4 on increasing the volume fraction of the nanoparticle. The difference among the effective dynamic viscosity models of nanofluid plays an important role here such that the average Nusselt number demonstrates an increasing or decreasing trend with the concentration of nanoparticle.

scholarly journals Rotating Flow in a Nanofluid with CNT Nanoparticles over a Stretching/Shrinking Surface

Mathematics ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 7
Author(s):  
Nor Azizah Yacob ◽  
Nor Fadhilah Dzulkifli ◽  
Siti Nur Alwani Salleh ◽  
Anuar Ishak ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Carbon Nanotubes ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Volume Fraction ◽  
Rotating Flow ◽  
Nanoparticle Volume Fraction ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Shrinking Surface

The steady three-dimensional rotating flow past a stretching/shrinking surface in water and kerosene-based nanofluids containing single and multi-walled carbon nanotubes (CNTs) is investigated. The governing equations are converted to similarity equations, and then numerically solved using MATLAB software. The impacts of rotational, suction, and nanoparticle volume fraction on the flow and the thermal fields, as well as velocity and temperature gradients at the surface, are represented graphically and are analyzed. Further, the friction factor and the heat transfer rate for different parameters are presented in tables. It is found that the heat transfer rate increases with increasing nanoparticle volume fraction as well as suction parameter in water and kerosene-based nanofluids of single and multi-walled CNTs. However, the increment in the rotating flow parameter decreases the rate of heat transfer. Multi-walled carbon nanotubes and kerosene-based nanofluid contribute to heat transfer rates better than single-walled carbon nanotubes and water-based nanofluid, respectively. A unique solution exists for the stretching surface, while two solutions are obtained for the shrinking surface. Further analysis of their stabilities shows that only one of them is stable over time.

Magnetohydrodynamic and Heat Transfer Impacts on Ferrofluid Over a Rotating Disk: An Application to Hard Disk Drives

2020 ◽  
Vol 13 (1) ◽  
Author(s):  
V. Loganayagi ◽  
Peri K. Kameswaran
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Volume Fraction ◽  
Hall Current ◽  
Hard Disk Drives ◽  
Rotating Disk ◽  
Disk Drives ◽  
Nanoparticle Volume Fraction ◽  
Motor Oil

Abstract The motivation behind this article is to explore the impacts of heat transfer, magnetohydrodynamic, and hall current on two-dimensional incompressible nanofluid flow over a rotating disk. The nanofluid model utilized in the present investigation comprises the nanoparticle fraction model. Two sorts of nanoparticles to be specific Hematite (Fe2O3) is the principal source of iron and Cobalt alloy (Co64 Cr30 W6) is generally used metal alloy that is primarily Cobalt and Chromium with base fluid Motor Oil 10W30 is taken into consideration. The Prandtl number identifying with motor oil is (Pr = 1531.92). The governing equations are reduced to a system of ordinary differential equations by using Von-Karman transformation and then solved numerically utilizing matlab bvp4c. Impacts of the magnetic field, hall current, and nanoparticle volume fraction on tangential, radial velocities, and temperature profiles have been examined. Numerical outcomes have been acquired for various physical parameters through graphical representation. We have demonstrated that a remarkable reconciliation exists among the current outcomes and those in the literature for various values of magnetic parameter and velocity slip parameters, in the absence of other parameters. It is also found that radial and tangential velocities increase more in the case of Fe2O3 nanoparticles when compared with Co64 Cr30 W6 because of density variations. It is discovered that enhancement in a nanoparticle volume fraction reduces the heat transfer rate. It can moreover be clarified such a way that as the nanoparticle volume fraction raise, the density of nanoparticles increases, temperature also increases subsequently heat transfer rate decreases. This result keeps more cooling for the hard disk drives and might be intrigued for engineers.

scholarly journals Flow and Heat Transfer Investigation of Forced Convection of Nanofluid in a Wavy Channel at Different Wavelengths and Phase Difference

2018 ◽  
Vol 36 (2) ◽  
pp. 137
Author(s):  
Mazaher Rahimi Esboee ◽  
Esmaeil Abokazempour ◽  
Abbas Ramiar ◽  
Amir Arya ◽  
Ali Akbar Ranjbar ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Volume Fraction ◽  
Phase Lag ◽  
Wavy Channel ◽  
Flow And Heat Transfer ◽  
Flow Geometry ◽  
Fluid Properties ◽  
Volume Method

Changing the fluid properties and flow geometry are two common ways of making an improvement in heat transfer rate. Recent investigations on nanofluid, as such suspensions are often called, indicate that the suspended nanoparticles remarkably change the transport properties and heat transfer characteristics of the suspension. Bending walls can also improve heat transfer by increasing the total heat transfer surface and changing the behavior of the flow. In this work a two dimensional incompressible laminar nanofluid flow in a wavy channel with sinusoidal curved walls is numerically investigated. The finite volume method, and Rhie and Chow interpolation with a collocated mesh are used for solving the governing equations. The effects of the volume fraction of nanoparticles, Reynolds number, the wavelength, Phase lag and amplitude on the heat transfer rate are studied. The present work showed good agreement with existing experimental and Numerical results. Increasing the amplitude of the wave and nanoparticles volume fraction, and decreasing wavelength of the wave, has great effects on enhancement of heat transfer rate.

scholarly journals Numerical heat transfer studies of a latent heat storage system containing nano-enhanced phase change material

2011 ◽  
Vol 15 (1) ◽  
pp. 169-181 ◽  
Author(s):  
A.A. Ranjbar ◽  
S. Kashani ◽  
S.F. Hosseinizadeh ◽  
M. Ghanbarpour
Keyword(s):  
Heat Transfer ◽  
Energy Storage ◽  
Phase Change ◽  
Heat Transfer Rate ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Transfer Rate ◽  
Volume Fraction ◽  
Storage System ◽  
Nanoparticle Volume Fraction

The heat transfer enhancement in the latent heat thermal energy storage system through dispersion of nanoparticle is reported. The resulting nanoparticle-enhanced phase change materials (NEPCM) exhibit enhanced thermal conductivity in comparison to the base material. The effects of nanoparticle volume fraction and some other parameters such as natural convection are studied in terms of solid fraction and the shape of the solid-liquid phase front. It has been found that higher nanoparticle volume fraction result in a larger solid fraction. The present results illustrate that the suspended nanoparticles substantially increase the heat transfer rate and also the nanofluid heat transfer rate increases with an increase in the nanoparticles volume fraction. The increase of the heat release rate of the NEPCM shows its great potential for diverse thermal energy storage application.

scholarly journals Heat Transmission Reinforcers Induced by MHD Hybrid Nanoparticles for Water/Water-EG Flowing over a Cylinder

Coatings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 623
Author(s):  
Firas A. Alwawi ◽  
Mohammed Z. Swalmeh ◽  
Amjad S. Qazaq ◽  
Ruwaidiah Idris
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Volume Fraction ◽  
Liquid Velocity ◽  
Flow Characteristics ◽  
Hybrid Nanoparticles ◽  
Critical Parameters ◽  
Heat Transmission ◽  
Constant Wall Temperature

The assumptions that form our focus in this study are water or water-ethylene glycol flowing around a horizontal cylinder, containing hybrid nanoparticles, affected by a magnetic force, and under a constant wall temperature, in addition to considering free convection. The Tiwari–Das model is employed to highlight the influence of the nanoparticles volume fraction on the flow characteristics. A numerical approximate technique called the Keller box method is implemented to obtain a solution to the physical model. The effects of some critical parameters related to heat transmission are also graphically examined and analyzed. The increase in the nanoparticle volume fraction increases the heat transfer rate and liquid velocity; the strength of the magnetic field has an adverse effect on liquid velocity, heat transfer, and skin friction. We find that cobalt nanoparticles provide more efficient support for the heat transfer rate of aluminum oxide than aluminum nanoparticles.

Sign in / Sign up

Export Citation Format

Share Document