Cross-flow-type breakdown induced by distributed roughness in the boundary layer of a hypersonic capsule configuration

2018 ◽  
Vol 856 ◽  
pp. 470-503 ◽  
Author(s):  
Antonio Di Giovanni ◽  
Christian Stemmer
Keyword(s):  
Cross Validation ◽  
Cross Flow ◽  
Flow Type ◽  
Turbulent Transition ◽  
Roughness Elements ◽  
New Type ◽  
Spatio Temporal ◽  
The Stability ◽  
Secondary Instabilities ◽  
Symmetric And Antisymmetric Modes

Direct numerical simulations are undertaken to investigate the nature of instability mechanisms induced by singular and distributed roughnesses on a blunt-capsule configuration. On the base of a capsule-like hemispherical forebody at wind-tunnel conditions ($M=5.9$), we analyse the development of unsteady disturbances behind a patch of two different roughness geometries. First, spanwise periodic roughness elements are considered and cross-validation with other methods of the stability analysis is achieved. Two main unstable modes are found in the roughness wake, corresponding to the symmetric and antisymmetric modes already known for single roughness elements. Second, the case of a patch of (pseudo-)randomly distributed roughness is presented. A new type of roughness-induced cross-flow-like instability is observed for the blunt-capsule configuration. The rapid growth of primary and secondary instabilities in the cross-flow-type vortex is analysed and quantified in both the linear and nonlinear stages up to the laminar–turbulent breakdown. Spatio-temporal Fourier analysis is performed to track the onset of secondary instabilities, whereas laminar–turbulent transition is identified by the steep increase of the wall heat flux.

Study on Laminar Turbulent Transition in Square Arrayed Rod Bundles

2021 ◽  
Author(s):  
Carolina S. B. Dutra ◽  
Elia Merzari
Keyword(s):  
Turbulent Flows ◽  
Flow Behavior ◽  
Spectral Element ◽  
Linear Instability ◽  
Rod Bundles ◽  
Rod Bundle ◽  
Turbulent Transition ◽  
Spatio Temporal ◽  
The Stability ◽  
Laminar Turbulent Transition

Abstract The study of coolant flow behavior in rod bundles is of relevance to the design of nuclear reactors. Although laminar and turbulent flows have been researched extensively, there are still gaps in understanding the process of laminar-turbulent transition. Such a process may involve the formation of a gap vortex street as the consequence of a related linear instability. In the present work, a parametric study was performed to analyze the spatially developing turbulence in a simplified geometry setting. The geometry includes two square arrayed rod bundle subchannels with periodic boundary conditions in the cross-section. The pitch-to-diameter ratios range from 1.05 to 1.20, and the length of the domain was selected to be 100 diameters. No-slip condition at the wall, and inlet-outlet configuration were employed. Then, to investigate the stability of the flow, the Reynolds number was varied from 250 to 3000. The simulations were carried out using the spectral-element code Nek5000, with a Direct Numerical Simulation (DNS) approach. Data were analyzed to examine this Spatio-temporal developing instability. In particular, we evaluate the location of onset and spatial growth of the instability.

Three-dimensional instabilities in steady and unsteady non-parallel boundary layers, including effects of Tollmien-Schlichting disturbances and cross flow

1987 ◽  
Vol 409 (1837) ◽  
pp. 229-248 ◽  
Keyword(s):  
Boundary Layers ◽  
Large Scale ◽  
Three Dimensional ◽  
Steady Motion ◽  
Cross Flow ◽  
Parallel Flows ◽  
Roughness Elements ◽  
Tollmien Schlichting ◽  
Flow Effects ◽  
Secondary Instabilities

Three-dimensional (3D) linear stability properties are considered for steady and unsteady 2D or 3D boundary layers with significant non-parallelism present. Two main examples of such non-parallel flows whose stability is of interest are, firstly, steady motion, over roughness elements, in cross flow, or in large-scale separation and, secondly, unsteady 2D Tollmien-Schlichting (TS) motion, with its associated question of secondary instabilities. A high-frequency stability analysis is presented here. It is found that, for 2DTS or steady boundary layers, there is a swing in the direction of maximum TS spatial growth rate, from 0° for parallel flow towards 64.68° away from the free-stream direction, as the nonparallel flow effects increase. These effects then depend principally on, and indeed are proportional to, the local slope of the boundary-layer displacement. Cross flow can also have a profound impact on TS instabilities. Further implications for higher-amplitude and/or fasterscale disturbances, their secondary instability, and nonlinear interactions, are also discussed.

Control of a swept-wing boundary layer using ring-type plasma actuators

2018 ◽  
Vol 844 ◽  
pp. 36-60 ◽  
Author(s):  
Nima Shahriari ◽  
Matthias R. Kollert ◽  
Ardeshir Hanifi
Keyword(s):  
Boundary Layer ◽  
Cross Flow ◽  
Plasma Actuators ◽  
Swept Wing ◽  
Ring Type ◽  
Transition Control ◽  
Turbulent Transition ◽  
Roughness Elements ◽  
Order Of Magnitude ◽  
Induced Velocity

Application of ring-type plasma actuators for control of laminar–turbulent transition in a swept-wing boundary layer is investigated thorough direct numerical simulations. These actuators induce a wall-normal jet in the boundary layer and can act as virtual roughness elements. The flow configuration resembles experiments by Kim et al. (2016 Technical Report. BUTERFLI Project TR D3.19, http://eprints.nottingham.ac.uk/id/eprint/46529). The actuators are modelled by the volume forces computed from the experimentally measured induced velocity field at the quiescent air condition. Stationary and travelling cross-flow vortices are triggered in the simulations by means of surface roughness and random unsteady perturbations. Interaction of vortices generated by actuators with these perturbations is investigated in detail. It is found that, for successful transition control, the power of the actuators should be increased to generate jet velocities that are one order of magnitude higher than those used in the experiments by Kim et al. (2016) mentioned above.

Receptivity coefficients at excitation of cross-flow waves by free-stream vortices in the presence of surface roughness

2013 ◽  
Vol 716 ◽  
pp. 487-527 ◽  
Author(s):  
V. I. Borodulin ◽  
A. V. Ivanov ◽  
Y. S. Kachanov ◽  
A. P. Roschektaev
Keyword(s):  
Surface Roughness ◽  
Free Stream ◽  
Cross Flow ◽  
Leading Edge ◽  
Vortex Street ◽  
Swept Wing ◽  
Model Surface ◽  
Wing Model ◽  
Roughness Elements ◽  
The Stability

AbstractThe present experimental study is devoted to examination of the vortex receptivity mechanism associated with excitation of unsteady cross-flow (CF) waves due to scattering of unsteady free-stream vortices on localized steady surface non-uniformities (roughness). The measurements are carried out in a low-turbulence wind tunnel by means of a hot-wire anemometer in a boundary layer developing over a $25\textdegree $ swept-wing model. The harmonic-in-time free-stream vortices were excited by a thin vibrating wire located upstream of the experimental-model leading edge and represented a kind of small-amplitude von Kármán vortex street with spanwise orientation of the generated instantaneous vorticity vectors. The controlled roughness elements (the so-called ‘phased roughness’) were placed on the model surface. This roughness had a special shape, which provided excitation of CF-waves having basically some predetermined (required) spanwise wavenumbers. The linearity of the stability and receptivity mechanisms under study was checked accurately by means of variation of both the free-stream-vortex amplitude and the surface roughness height. These experiments were directed to obtaining the amplitudes and phases of the vortex-roughness receptivity coefficients for a number of vortex disturbance frequencies. The vortex street position with respect to the model surface (the vortex offset parameter) was also varied. The receptivity characteristics obtained experimentally in Fourier space are independent of the particular roughness shape, and can be used for validation of receptivity theories.

scholarly journals Spatio-temporal selection of reference genes in the two congeneric species of Glycyrrhiza

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Yuping Li ◽  
Xiaoju Liang ◽  
Xuguo Zhou ◽  
Yu An ◽  
Ming Li ◽  
...  
Keyword(s):  
Gene Expression ◽  
Developmental Stage ◽  
Reference Genes ◽  
Developmental Stages ◽  
Individual Factors ◽  
Congeneric Species ◽  
Spatio Temporal ◽  
The Stability ◽  
Different Tissues ◽  
Selection Of

AbstractGlycyrrhiza, a genus of perennial medicinal herbs, has been traditionally used to treat human diseases, including respiratory disorders. Functional analysis of genes involved in the synthesis, accumulation, and degradation of bioactive compounds in these medicinal plants requires accurate measurement of their expression profiles. Reverse transcription quantitative real-time PCR (RT-qPCR) is a primary tool, which requires stably expressed reference genes to serve as the internal references to normalize the target gene expression. In this study, the stability of 14 candidate reference genes from the two congeneric species G. uralensis and G. inflata, including ACT, CAC, CYP, DNAJ, DREB, EF1, RAN, TIF1, TUB, UBC2, ABCC2, COPS3, CS, R3HDM2, were evaluated across different tissues and throughout various developmental stages. More importantly, we investigated the impact of interactions between tissue and developmental stage on the performance of candidate reference genes. Four algorithms, including geNorm, NormFinder, BestKeeper, and Delta Ct, were used to analyze the expression stability and RefFinder, a comprehensive software, provided the final recommendation. Based on previous research and our preliminary data, we hypothesized that internal references for spatio-temporal gene expression are different from the reference genes suited for individual factors. In G. uralensis, the top three most stable reference genes across different tissues were R3HDM2, CAC and TUB, while CAC, CYP and ABCC2 were most suited for different developmental stages. CAC is the only candidate recommended for both biotic factors, which is reflected in the stability ranking for the spatio (tissue)-temporal (developmental stage) interactions (CAC, R3HDM2 and DNAJ). Similarly, in G. inflata, COPS3, R3HDM2 and DREB were selected for tissues, while RAN, COPS3 and CS were recommended for developmental stages. For the tissue-developmental stage interactions, COPS3, DREB and ABCC2 were the most suited reference genes. In both species, only one of the top three candidates was shared between the individual factors and their interactions, specifically, CAC in G. uralensis and COPS3 in G. inflata, which supports our overarching hypothesis. In summary, spatio-temporal selection of reference genes not only lays the foundation for functional genomics research in Glycyrrhiza, but also facilitates these traditional medicinal herbs to reach/maximize their pharmaceutical potential.

Effect of Geometric Parameters of New Semisubmersible Platform on Stability and Hydrodynamic Performance

2021 ◽  
Author(s):  
Tianying Wang ◽  
Yanjun Zhou ◽  
Honglin Tang ◽  
Shihua Zhang ◽  
Haiqing Tian
Keyword(s):  
Geometric Parameters ◽  
Hydrodynamic Performance ◽  
Geometrical Parameters ◽  
Main Body ◽  
Floating Bodies ◽  
Full Picture ◽  
New Type ◽  
Design Plan ◽  
The Stability ◽  
Shape Characteristics

Abstract The JCSM concept (short for Jackup Combined Semisubmersible Multifunction Platform) is a new type of semisubmersible platform presented by the first author, which overcomes the shortcomings of the available semisubmersible platforms, and combines the advantages of the traditional semisubmersible platform, the Jackup platform and the new FPSO concept - IQFP. Due to the complicated interaction between stability and hydrodynamic performance, it is necessary to explore the effect of geometrical parameters of the main body on the stability and hydrodynamic performance in order to obtain the optimal design plan of a JCSM platform. Firstly, the structure components and innovations of the JCSM were briefly reviewed in order to facilitate readers to understand its full picture. Then, six independent geometric parameters were selected by carefully studying the shape characteristics of the initial design plan of a JCSM study case. Furthermore, the stability heights and motion responses of various floating bodies of the JCSM case with different geometric parameters in wave were calculated using boundary element method based on potential flow theory. Lastly, effect of the shape parameters on stability and hydrodynamic performance of the JCSM was qualitatively evaluated. The research would shed lights on the shape design of the JCSM main body.

scholarly journals Evaluation of Lipases from Wild Microbial Strains as Biocatalysts in Biodiesel Production

Separations ◽  
2018 ◽  
Vol 5 (4) ◽  
pp. 53 ◽  
Author(s):  
Carlos Luna ◽  
Diego Luna ◽  
Felipa Bautista ◽  
Juan Calero ◽  
Antonio Romero ◽  
...  
Keyword(s):  
Biodiesel Production ◽  
Purification Process ◽  
Bacterial Strains ◽  
Production Methods ◽  
Mild Conditions ◽  
New Type ◽  
Microbial Strains ◽  
The Stability ◽  
Microbial Strain ◽  
Biodiesel Industry

In this study, the evaluation of the catalytic behavior of several wild bacterial strains in the 1,3-selective ethanolysis of triglycerides with ethanol to produce a new type of biodiesel (Ecodiesel) that integrates glycerol as monoacylglycerols was carried out. The Ecodiesel production not only avoids the elimination of glycerol, which is largely generated as a by-product in the biodiesel industry, but also results in an increase in the biofuel yield. The wild microbial strain samples were obtained from several lipophilic organisms. In addition to evaluate the enzymatic extracts, the minimum grade of purification of the strains, necessary to obtain similar results to those attained with commercial lipases was studied. This purification treatment included a dialysis followed by a lyophilization process. Such extracts were directly used as biocatalysts in the transesterification reaction of sunflower oil with ethanol, attaining much better results (yield close to 100%) than those obtained with strains which were not submitted to the purification process (yields lower than 10%). Furthermore, the results here obtained are similar to those obtained with commercial lipases but were achieved under mild conditions and lower reaction time (2 h). In addition, the stability of the enzymatic extracts was corroborated by subsequent reactions, showing no loss of activity. Thus, this study brings to light that enzymatic extracts obtained by a very simple purification process can be economically competitive with the conventional biodiesel production methods.

Sign in / Sign up

Export Citation Format

Share Document