A hydrodynamic analysis of self-similar radiative ablation flows

2018 ◽  
Vol 848 ◽  
pp. 219-255
Author(s):  
J.-M. Clarisse ◽  
J.-L. Pfister ◽  
S. Gauthier ◽  
C. Boudesocque-Dubois
Keyword(s):  
Acoustic Waves ◽  
Inertial Confinement Fusion ◽  
High Energy ◽  
High Energy Density ◽  
Inertial Confinement ◽  
X Rays ◽  
Nonlinear Conductivity ◽  
Conduction Model ◽  
Hydrodynamic Analysis ◽  
Self Similar

Self-similar solutions to the compressible Euler equations with nonlinear conduction are considered as particular instances of unsteady radiative deflagration – or ‘ablation’ – waves with the goal of characterizing the actual hydrodynamic properties that such flows may present. The chosen family of solutions, corresponding to the ablation of an initially quiescent perfectly cold and homogeneous semi-infinite slab of inviscid compressible gas under the action of increasing external pressures and radiation fluxes, is well suited to the description of the early ablation of a target by gas-filled cavity X-rays in experiments of high energy density physics. These solutions are presently computed by means of a highly accurate numerical method for the radiative conduction model of a fully ionized plasma under the approximation of a non-isothermal leading shock wave. The resulting set of solutions is unique for its high fidelity description of the flows down to their finest scales and its extensive exploration of external pressure and radiative flux ranges. Two different dimensionless formulations of the equations of motion are put forth, yielding two classifications of these solutions which are used for carrying out a quantitative hydrodynamic analysis of the corresponding flows. Based on the main flow characteristic lengths and on standard characteristic numbers (Mach, Péclet, stratification and Froude numbers), this analysis points out the compressibility and inhomogeneity of the present ablative waves. This compressibility is further analysed to be too high, whether in terms of flow speed or stratification, for the low Mach number approximation, often used in hydrodynamic stability analyses of ablation fronts in inertial confinement fusion (ICF), to be relevant for describing these waves, and more specifically those with fast expansions which are of interest in ICF. Temperature stratification is also shown to induce, through the nonlinear conductivity, supersonic upstream propagation of heat-flux waves, besides a modified propagation of quasi-isothermal acoustic waves, in the flow conduction regions. This description significantly departs from the commonly admitted depiction of a quasi-isothermal conduction region where wave propagation is exclusively ascribed to isothermal acoustics and temperature fluctuations are only diffused.

scholarly journals Conceptual design of initial opacity experiments on the national ignition facility

2017 ◽  
Vol 83 (1) ◽  
Author(s):  
R. F. Heeter ◽  
J. E. Bailey ◽  
R. S. Craxton ◽  
B. G. DeVolder ◽  
E. S. Dodd ◽  
...  
Keyword(s):  
Inertial Confinement Fusion ◽  
High Energy ◽  
High Energy Density ◽  
Inertial Confinement ◽  
X Rays ◽  
X Ray ◽  
Confinement Fusion ◽  
Final Design ◽  
Laser Heated ◽  
Point Projection

Accurate models of X-ray absorption and re-emission in partly stripped ions are necessary to calculate the structure of stars, the performance of hohlraums for inertial confinement fusion and many other systems in high-energy-density plasma physics. Despite theoretical progress, a persistent discrepancy exists with recent experiments at the Sandia Z facility studying iron in conditions characteristic of the solar radiative–convective transition region. The increased iron opacity measured at Z could help resolve a longstanding issue with the standard solar model, but requires a radical departure for opacity theory. To replicate the Z measurements, an opacity experiment has been designed for the National Facility (NIF). The design uses established techniques scaled to NIF. A laser-heated hohlraum will produce X-ray-heated uniform iron plasmas in local thermodynamic equilibrium (LTE) at temperatures ${\geqslant}150$ eV and electron densities ${\geqslant}7\times 10^{21}~\text{cm}^{-3}$. The iron will be probed using continuum X-rays emitted in a ${\sim}200$ ps, ${\sim}200~\unicode[STIX]{x03BC}\text{m}$ diameter source from a 2 mm diameter polystyrene (CH) capsule implosion. In this design, $2/3$ of the NIF beams deliver 500 kJ to the ${\sim}6$ mm diameter hohlraum, and the remaining $1/3$ directly drive the CH capsule with 200 kJ. Calculations indicate this capsule backlighter should outshine the iron sample, delivering a point-projection transmission opacity measurement to a time-integrated X-ray spectrometer viewing down the hohlraum axis. Preliminary experiments to develop the backlighter and hohlraum are underway, informing simulated measurements to guide the final design.

Temperature relaxation in strongly-coupled binary ionic mixtures

2021 ◽  
Author(s):  
Robert Sprenkle ◽  
Luciano Silvestri ◽  
M. S. Murillo ◽  
Scott Bergeson
Keyword(s):  
Material Properties ◽  
Inertial Confinement Fusion ◽  
Coulomb Systems ◽  
High Energy ◽  
High Energy Density ◽  
Inertial Confinement ◽  
Relaxation Rates ◽  
Strongly Coupled ◽  
Wide Range ◽  
Temperature Relaxation

Abstract New facilities such as the National Ignition Facility and the Linac Coherent Light Source have pushed the frontiers of high energy-density matter. These facilities offer unprecedented opportunities for exploring extreme states of matter, ranging from cryogenic solid-state systems to hot, dense plasmas, with applications to inertial-confinement fusion and astrophysics. However, significant gaps in our understanding of material properties in these rapidly evolving systems still persist. In particular, non-equilibrium transport properties of strongly-coupled Coulomb systems remain an open question. Here, we study ion-ion temperature relaxation in a binary mixture, exploiting a recently-developed dual-species ultracold neutral plasma. We compare measured relaxation rates with atomistic simulations and a range of popular theories. Our work validates the assumptions and capabilities of the simulations and invalidates theoretical models in this regime. This work illustrates an approach for precision determinations of detailed material properties in Coulomb mixtures across a wide range of conditions.

scholarly journals Towards ultra-intense ultra-short ion beams driven by a multi-PW laser

2019 ◽  
Vol 37 (03) ◽  
pp. 288-300 ◽  
Author(s):  
J. Badziak ◽  
J. Domański
Keyword(s):  
Nuclear Physics ◽  
Inertial Confinement Fusion ◽  
Copper Ions ◽  
Laser Pulses ◽  
High Energy ◽  
Ion Beams ◽  
High Energy Density ◽  
Inertial Confinement ◽  
Carbon Ions ◽  
Particle In Cell

AbstractThe multi-petawatt (PW) lasers currently being built in Europe as part of the Extreme Light Infrastructure (ELI) project will be capable of generating femtosecond light pulses of ultra-relativistic intensities (~1023–1024 W/cm2) that have been unattainable so far. Such laser pulses can be used for the production of high-energy ion beams with unique features that could be applied in various fields of scientific and technological research. In this paper, the prospect of producing ultra-intense (intensity ≥1020 W/cm2) ultra-short (pico- or femtosecond) high-energy ion beams using multi-PW lasers is outlined. The results of numerical studies on the acceleration of light (carbon) ions, medium-heavy (copper) ions and super-heavy (lead) ions driven by a femtosecond laser pulse of ultra-relativistic intensity, performed with the use of a multi-dimensional (2D3 V) particle-in-cell code, are presented, and the ion acceleration mechanisms and properties of the generated ion beams are discussed. It is shown that both in the case of light ions and in the case of medium-heavy and super-heavy ions, ultra-intense femtosecond multi-GeV ion beams with a beam intensity much higher (by a factor ~102) and ion pulse durations much shorter (by a factor ~104–105) than achievable presently in conventional radio frequency-driven accelerators can be produced at laser intensities of 1023 W/cm2 predicted for the ELI lasers. Such ion beams can open the door to new areas of research in high-energy density physics, nuclear physics and inertial confinement fusion.

scholarly journals Observation of a high degree of stopping for laser-accelerated intense proton beams in dense ionized matter

2020 ◽  
Vol 11 (1) ◽  
Author(s):  
Jieru Ren ◽  
Zhigang Deng ◽  
Wei Qi ◽  
Benzheng Chen ◽  
Bubo Ma ◽  
...  
Keyword(s):  
Inertial Confinement Fusion ◽  
Dominant Role ◽  
Dense Matter ◽  
High Energy ◽  
Fast Ignition ◽  
High Energy Density ◽  
Intense Laser ◽  
High Yield ◽  
Inertial Confinement ◽  
Proton Beams

Abstract Intense particle beams generated from the interaction of ultrahigh intensity lasers with sample foils provide options in radiography, high-yield neutron sources, high-energy-density-matter generation, and ion fast ignition. An accurate understanding of beam transportation behavior in dense matter is crucial for all these applications. Here we report the experimental evidence on one order of magnitude enhancement of intense laser-accelerated proton beam stopping in dense ionized matter, in comparison with the current-widely used models describing individual ion stopping in matter. Supported by particle-in-cell (PIC) simulations, we attribute the enhancement to the strong decelerating electric field approaching 1 GV/m that can be created by the beam-driven return current. This collective effect plays the dominant role in the stopping of laser-accelerated intense proton beams in dense ionized matter. This finding is essential for the optimum design of ion driven fast ignition and inertial confinement fusion.

X‐ray spectroscopy of high‐energy density inertial confinement fusion plasmas

1993 ◽  
Vol 5 (9) ◽  
pp. 3328-3336 ◽  
Author(s):  
C. J. Keane ◽  
B. A. Hammel ◽  
D. R. Kania ◽  
J. D. Kilkenny ◽  
R. W. Lee ◽  
...  
Keyword(s):  
Energy Density ◽  
Inertial Confinement Fusion ◽  
High Energy ◽  
High Energy Density ◽  
Inertial Confinement ◽  
Fusion Plasmas ◽  
X Ray ◽  
Confinement Fusion

scholarly journals AWE experimental laser plasma program

2000 ◽  
Vol 18 (2) ◽  
pp. 213-218 ◽  
Author(s):  
M. DUNNE ◽  
J. EDWARDS ◽  
P. GRAHAM ◽  
A. EVANS ◽  
S. ROTHMAN ◽  
...  
Keyword(s):  
Equation Of State ◽  
Inertial Confinement Fusion ◽  
Fusion Energy ◽  
Strong Shock ◽  
High Energy ◽  
High Energy Density ◽  
Radiation Hydrodynamics ◽  
Inertial Confinement ◽  
X Ray ◽  
Wide Range

The achievement of ignition from an Inertial Confinement Fusion capsule will require a detailed understanding of a wide range of high energy density phenomena. This paper presents some recent work aimed at improving our knowledge of the strength and equation of state characteristics of low-Z materials, and outlines data which will provide quantitative benchmarks against which our predictive radiation hydrodynamics capabilities can be tested. Improvements to our understanding in these areas are required if reproducible and predictable fusion energy production is to be achieved on the next generation of laser facilities.In particular, the HELEN laser at AWE has been used to create a thermal X-ray source with 140 eV peak radiation temperature and 3% instantaneous flux uniformity to allow measurements of the Equation of State of materials at pressures up to 20 Mbar to an accuracy of <±2% in shock velocity. The same laser has been used to investigate the onset of spallation upon the release of a strong shock at a metal-vacuum boundary, with dynamic radiography used to image the spalled material in flight for the first time. Finally, a range of experiments have been performed to generate quantitative radiation hydrodynamics data on the evolution of gross target defects, driven in both planar and imploding geometry. X-ray radiography was used to record the evolving target deformation in a system where the X-ray drive and unperturbed target response were sufficiently characterized to permit meaningful analysis. The results have been compared to preshot predictions made using a wide variety of fluid codes, highlighting substantial differences between the various approaches, and indicating significant discrepancies with the experimental reality. The techniques developed to allow quantitative comparisons are allowing the causes of the discrepancies to be identified, and are guiding the development of new simulation techniques.

scholarly journals High energy electron radiography scheme with high spatial and temporal resolution in three dimension based on a e-LINAC

2016 ◽  
Vol 34 (2) ◽  
pp. 338-342 ◽  
Author(s):  
Y. Zhao ◽  
Z. Zhang ◽  
W. Gai ◽  
Y. Du ◽  
S. Cao ◽  
...  
Keyword(s):  
Electron Beam ◽  
Temporal Resolution ◽  
Inertial Confinement Fusion ◽  
High Energy ◽  
High Energy Density ◽  
Inertial Confinement ◽  
Three Dimension ◽  
Scattered Electron ◽  
Electron Linear Accelerator ◽  
Confinement Fusion

AbstractWe present a scheme of electron beam radiography to dynamically diagnose the high energy density (HED) matter in three orthogonal directions simultaneously based on electron Linear Accelerator. The dynamic target information such as, its profile and density could be obtained through imaging the scattered electron beam passing through the target. Using an electron bunch train with flexible time structure, a very high temporal evolution could be achieved. In this proposed scheme, it is possible to obtain 1010 frames/second in one experimental event, and the temporal resolution can go up to 1 ps, spatial resolution to 1 µm. Successful demonstration of this concept will have a major impact for both future inertial confinement fusion science and HED physics research.

Sign in / Sign up

Export Citation Format

Share Document