Dispersion coefficient in an electro-osmotic flow of a viscoelastic fluid through a microchannel with a slowly varying wall zeta potential

2018 ◽  
Vol 839 ◽  
pp. 348-386 ◽  
Author(s):  
J. C. Arcos ◽  
F. Méndez ◽  
E. G. Bautista ◽  
O. Bautista

The dispersion coefficient of a passive solute in a steady-state pure electro-osmotic flow (EOF) of a viscoelastic liquid, whose rheological behaviour follows the simplified Phan-Thien–Tanner (sPTT) model, along a parallel flat plate microchannel, is studied. The walls of the microchannel are assumed to have modulated and low $\unicode[STIX]{x1D701}$ potentials, which vary slowly in the axial direction in a sinusoidal manner. The flow field required to obtain the dispersion coefficient was solved using the lubrication approximation theory (LAT). The solution of the electric potential is based on the Debye–Hückel approximation for a symmetric $(z:z)$ electrolyte. The viscoelasticity of the fluid is observed to notably amplify the axial distribution of the effective dispersion coefficients due to the variation in the $\unicode[STIX]{x1D701}$ potentials of the walls. The problem was formulated for two cases: when the Debye layer thickness (EDL) was on the order of unity (thick EDL) and in the limit where the thickness of the EDL was very small compared with the height of the microchannel (thin EDL limit). Due to the coupling between the nonlinear governing equations and the sPTT fluid model, they were replaced by their approximate linearized forms and solved in the limit of $\unicode[STIX]{x1D700}\ll 1$ using the regular perturbation technique. Here $\unicode[STIX]{x1D700}$ is the amplitude of the sinusoidal function of the $\unicode[STIX]{x1D701}$ potentials. Additionally, the numerical solution of the simplified governing equations was also obtained for $\unicode[STIX]{x1D700}=O(1)$ and compared with the approximate solution, showing excellent agreement for $0\leqslant \unicode[STIX]{x1D700}\leqslant 0.3$. Note that the dispersion coefficient primarily depends on the Deborah number, on the ratio of the half-height of the microchannel to the Debye length, and on the assumed variation in the $\unicode[STIX]{x1D701}$ potentials of the walls.

2015 ◽  
Vol 137 (9) ◽  
Author(s):  
Yi Zhou ◽  
Yongqi Xie ◽  
Chun Yang ◽  
Yee Cheong Lam

Electro-osmotic flow (EOF) is widely used in microfluidic systems. Here, we report an analysis of the thermal effect on EOF under an imposed temperature difference. Our model not only considers the temperature-dependent thermophysical and electrical properties but also includes ion thermodiffusion. The inclusion of ion thermodiffusion affects ionic distribution, local electrical potential, as well as free charge density, and thus has effect on EOF. In particular, we formulate an analytical model for the thermal effect on a steady, fully developed EOF in slit microchannel. Using the regular perturbation method, we solve the model analytically to allow for decoupling several physical mechanisms contributing to the thermal effect on EOF. The parametric studies show that the presence of imposed temperature difference/gradient causes a deviation of the ionic concentration, electrical potential, and electro-osmotic velocity profiles from their isothermal counterparts, thereby giving rise to faster EOF. It is the thermodiffusion induced free charge density that plays a key role in the thermodiffusion induced electro-osmotic velocity.


Complexity ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Riaz Ahmad ◽  
Asma Farooqi ◽  
Rashada Farooqi ◽  
Nawaf N. Hamadneh ◽  
Md Fayz-Al-Asad ◽  
...  

The current study provides an analytical approach to analyze the blood flow through a stenosed artery by using the Carreau fluid model. The flow governing equations are derived under the consideration of mild stenosis. Mathematical analysis has been carried out by considering the blood as non-Newtonian nature. Then, the analytical solution has been investigated by using the regular perturbation technique. The solutions obtained by this perturbation are up to the second-order in dimensionless Weissenberg number We . The performed computations of various parameter values such as velocity, wall shear stress, shear stress, and resistance impedance at the stenotic throat are discussed in detail for different values of Weissenberg number We . The obtained results demonstrate that for shear-thinning fluid, the fluid velocity increases with the increasing parameter m while opposite behavior is observed with the increase in We . Hence, the presented numerical analysis reveals many aspects of the flow by considering the blood as a non-Newtonian Carreau fluid model, and the presented model can be equally applicable to other bio-mathematical studies.


2019 ◽  
Vol 16 (09) ◽  
pp. 1950139 ◽  
Author(s):  
Safia Akram ◽  
Farkhanda Afzal ◽  
Muhammad Imran

The purpose of this paper is to discuss the theoretical study of a nonlinear problem of cilia induced flow by considering the fluid as anincompressible non-Newtonian fluid (hyperbolic tangent fluid) model by means of ciliated walls. The leading equations of present flow problem are simplified under the consideration of long-wavelength approximation. We have utilized regular perturbation technique to solve the simplified leading equations of hyperbolic tangent fluid model. The analytical solution is computed for stream function and numerical solution is computed for the rise in pressure. The characteristics of the ciliary system on tangent hyperbolic fluid are analyzed graphically and discussed in detail. It has been found that when [Formula: see text], the results of pressure rise coincide with the results of Newtonian fluid. It has also been observed that the size of the trapping bolus decreases with an increase in Hartmann number and Weissenberg number.


2009 ◽  
Vol 64 (9-10) ◽  
pp. 559-567 ◽  
Author(s):  
Sohail Nadeem ◽  
Safia Akram

In the present analysis, we have modeled the governing equations of a two dimensional hyperbolic tangent fluid model. Using the assumption of long wavelength and low Reynolds number, the governing equations of hyperbolic tangent fluid for an asymmetric channel have been solved using the regular perturbation method. The expression for pressure rise has been calculated using numerical integrations. At the end, various physical parameters have been shown pictorially. It is found that the narrow part of the channel requires a large pressure gradient, also in the narrow part the pressure gradient decreases with the increase in Weissenberg number We and channel width d.


2013 ◽  
Vol 135 (10) ◽  
Author(s):  
Chiu-On Ng ◽  
Bo Chen

An analytical study is presented in this paper on hydrodynamic dispersion due to steady electro-osmotic flow (EOF) in a slit microchannel with longitudinal step changes of ζ potential. The channel wall is periodically patterned with alternating stripes of distinct ζ potentials. Existing studies in the literature have considered dispersion in EOF with axial nonuniformity of ζ potential only in the limiting case where the length scale for longitudinal variation is much longer than the cross-sectional dimension of the channel. Hence, the existing theories on EOF dispersion subject to nonuniform charge distributions are all based on the lubrication approximation, by which cross-sectional mixing is ignored. In the present study, the general case where the length of one periodic unit of wall pattern (which involves a step change of ζ potential) is comparable with the channel height, as well as the long-wave limiting case, are investigated. The problem for the hydrodynamic dispersion coefficient is solved numerically in the general case, and analytically in the long-wave lubrication limit. The dispersion coefficient and the plate height are found to have strong, or even nonmonotonic, dependence on the controlling parameters, including the period length of the wall pattern, the area fraction of the EOF-suppressing region, the Debye parameter, the Péclet number, and the ratio of the two ζ potentials.


2007 ◽  
Vol 18 (07) ◽  
pp. 1119-1131 ◽  
Author(s):  
ZHEN-HUA CHAI ◽  
BAO-CHANG SHI ◽  
LIN ZHENG

In this paper, the effects of viscous dissipation in electro-osmotic flow in microchannels are numerically analyzed with lattice Boltzmann method (LBM), and three different lattice Boltzmann models that can recover the macroscopic governing equations for electro-osmotic flow (EOF) are proposed. As the dimensions of the channels approach the microlevel, viscous dissipation could be significant due to a high velocity gradient in electric double layer (EDL). Numerical results show that viscous dissipation plays an important role in EOF in microchannels.


Author(s):  
Chiu-On Ng ◽  
Cheng Qi

An analytical model is presented for low-Rossby-number electro-osmotic flow in a rectangular channel rotating about an axis perpendicular to its own. The flow is driven under the combined action of Coriolis, pressure, viscous and electric forces. Analytical solutions in the form of eigenfunction expansions are developed for the problem, which is controlled by the rotation parameter (or the inverse Ekman number), the Debye parameter, the aspect ratio of the channel and the distribution of zeta potentials on the channel walls. Under the conditions of fast rotation and a thin electric double layer (EDL), an Ekman–EDL develops on the horizontal walls. This is essentially an Ekman layer subjected to electrokinetic effects. The flow structure of this boundary layer as a function of the Ekman layer thickness normalized by the Debye length is investigated in detail in this study. It is also shown that the channel rotation may have qualitatively different effects on the flow rate, depending on the channel width and the zeta potential distributions. Axial and secondary flows are examined in detail to reveal how the development of a geostrophic core may lead to a rise or fall of the mean flow.


Author(s):  
Abuzar A Siddiqui ◽  
Akhlesh Lakhtakia

We have formulated and solved the boundary-value problem of steady, symmetric and one-dimensional electro-osmotic flow of a micropolar fluid in a uniform rectangular microchannel, under the action of a uniform applied electric field. The Helmholtz–Smoluchowski equation and velocity for micropolar fluids have also been formulated. Numerical solutions turn out to be virtually identical to the analytic solutions obtained after using the Debye–Hückel approximation, when the microchannel height exceeds the Debye length, provided that the zeta potential is sufficiently small in magnitude. For a fixed Debye length, the mid-channel fluid speed is linearly proportional to the microchannel height when the fluid is micropolar, but not when the fluid is simple Newtonian. The stress and the microrotation are dominant at and in the vicinity of the microchannel walls, regardless of the microchannel height. The mid-channel couple stress decreases, but the couple stress at the walls intensifies, as the microchannel height increases and the flow tends towards turbulence.


Sign in / Sign up

Export Citation Format

Share Document