Combining an obstacle and electrically driven vortices to enhance heat transfer in a quasi-two-dimensional MHD duct flow

2016 ◽  
Vol 792 ◽  
pp. 364-396 ◽  
Author(s):  
Ahmad H. A. Hamid ◽  
Wisam K. Hussam ◽  
Gregory J. Sheard
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Electric Current ◽  
Excitation Frequency ◽  
Current Injection ◽  
Heated Wall ◽  
Electrode Position ◽  
Two Dimensional ◽  
Flow Vorticity ◽  
The Magnetic Field

The design of vortex promoters in a heated-wall duct is often limited by the considerations of practicality, especially in complex systems such as fusion blankets. The present study investigates the use of current injection to invoke a street of vortices in quasi-two-dimensional high transverse magnetic field magnetohydrodynamic duct flows to enhance instability behind a cylinder. The intent is to generate intensive flow vorticity parallel to a magnetic field downstream of a field-aligned cylinder. Electric current enters the flow through an electrode embedded in one of the Hartmann walls, radiates outward, imparting a rotational forcing around the electrode due to the Lorentz force. The quasi-two-dimensional nature of these flows then promotes a vortical rotation across the interior of the duct with axis aligned to the magnetic field. The hot and cold walls are parallel to the magnetic field. Electric current amplitude and pulse width, excitation frequency and electrode position are systematically varied to explore their influences on the convective heat transport phenomenon. This investigation builds on a recommendation from previous work of Bühler (J. Fluid Mech., vol. 326, 1996, pp. 125–150) dedicated to understanding of the flow stability in a similar configuration. This study provides supportive evidence for the use of current injection as an alternative to the conventional mechanically actuated turbuliser, with heat transfer almost doubled for negligible additional pumping power requirements.

Convection and Stability in a Magnetic Fluid Saturated Rotating Porous Layer

2005 ◽  
Author(s):  
S. Saravanan ◽  
H. Yamaguchi
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Stability Analysis ◽  
Rayleigh Number ◽  
Porous Layer ◽  
Magnetic Fluid ◽  
Two Dimensional ◽  
Two Dimensional Flow ◽  
The Magnetic Field ◽  
Critical Wavenumber

The influence of magnetic field on the onset of centrifugal convection in a magnetic fluid filled differentially heated porous layer is studied theoretically using linear stability analysis. The resulting eigenvalue problem is solved using the Galerkin technique. The critical centrifugal Rayleigh number, the critical wavenumber and the eigenfunctions corresponding to two-dimensional flow pattern at the threshold are calculated. It is found that the magnetic field has a destabilizing effect and can be suitably adjusted depending on particle magnetization to enhance convection. This phenomenon can be utilized to increase the efficiency of heat transfer devices.

scholarly journals Effect of Magnetic Field on the Forced Convective Heat Transfer of Water–Ethylene Glycol-Based Fe3O4 and Fe3O4–MWCNT Nanofluids

2021 ◽  
Vol 11 (10) ◽  
pp. 4683
Author(s):  
Areum Lee ◽  
Chinnasamy Veerakumar ◽  
Honghyun Cho
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Field Strength ◽  
Ethylene Glycol ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Hybrid Nanofluid ◽  
Forced Convective Heat Transfer ◽  
The Magnetic Field

This paper discusses the forced convective heat transfer characteristics of water–ethylene glycol (EG)-based Fe3O4 nanofluid and Fe3O4–MWCNT hybrid nanofluid under the effect of a magnetic field. The results indicated that the convective heat transfer coefficient of magnetic nanofluids increased with an increase in the strength of the magnetic field. When the magnetic field strength was varied from 0 to 750 G, the maximum convective heat transfer coefficients were observed for the 0.2 wt% Fe3O4 and 0.1 wt% Fe3O4–MWNCT nanofluids, and the improvements were approximately 2.78% and 3.23%, respectively. The average pressure drops for 0.2 wt% Fe3O4 and 0.2 wt% Fe3O4–MWNCT nanofluids increased by about 4.73% and 5.23%, respectively. Owing to the extensive aggregation of nanoparticles by the external magnetic field, the heat transfer coefficient of the 0.1 wt% Fe3O4–MWNCT hybrid nanofluid was 5% higher than that of the 0.2 wt% Fe3O4 nanofluid. Therefore, the convective heat transfer can be enhanced by the dispersion stability of the nanoparticles and optimization of the magnetic field strength.

Effects of uniform or non-uniform heating at bottom wall on MHD mixed convection in a porous cavity saturated by nanofluid

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Subramanian Muthukumar ◽  
Selvaraj Sureshkumar ◽  
Arthanari Malleswaran ◽  
Murugan Muthtamilselvan ◽  
Eswari Prem
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Transfer Rate ◽  
Hartmann Number ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Darcy Number ◽  
Bottom Wall ◽  
Uniform Heating ◽  
The Magnetic Field

Abstract A numerical investigation on the effects of uniform and non-uniform heating of bottom wall on mixed convective heat transfer in a square porous chamber filled with nanofluid in the appearance of magnetic field is carried out. Uniform or sinusoidal heat source is fixed at the bottom wall. The top wall moves in either positive or negative direction with a constant cold temperature. The vertical sidewalls are thermally insulated. The finite volume approach based on SIMPLE algorithm is followed for solving the governing equations. The different parameters connected with this study are Richardson number (0.01 ≤ Ri ≤ 100), Darcy number (10−4 ≤ Da ≤ 10−1), Hartmann number (0 ≤ Ha ≤ 70), and the solid volume fraction (0.00 ≤ χ ≤ 0.06). The results are presented graphically in the form of isotherms, streamlines, mid-plane velocities, and Nusselt numbers for the various combinations of the considered parameters. It is observed that the overall heat transfer rate is low at Ri = 100 in the positive direction of lid movement, whereas it is low at Ri = 1 in the negative direction. The average Nusselt number is lowered on growing Hartmann number for all considered moving directions of top wall with non-uniform heating. The low permeability, Da = 10−4 keeps the flow pattern same dominating the magnetic field, whereas magnetic field strongly affects the flow pattern dominating the high Darcy number Da = 10−1. The heat transfer rate increases on enhancing the solid volume fraction regardless of the magnetic field.

scholarly journals The effect of simplifications of a numerical mesh on the results of electromagnetic analysis of the Nuclotron-type cable

2018 ◽  
Vol 177 ◽  
pp. 08004
Author(s):  
Łukasz Tomków
Keyword(s):  
Magnetic Field ◽  
Electric Current ◽  
Current Density ◽  
Electric Current Density ◽  
Electromagnetic Analysis ◽  
First Case ◽  
Single Region ◽  
The Magnetic Field

The model of a single Nuclotron-type cable is presented. The goal of this model is to assess the behaviour of the cable under different loads. Two meshes with different simplifications are applied. In the first case, the superconductor in the cable is modelled as single region. Second mesh considers individual strands of the cable. The significant differences between the distributions of the electric current density obtained with both models are observed. The magnetic field remains roughly similar.

scholarly journals THE ENERGY EIGENVALUES OF THE TWO DIMENSIONAL HYDROGEN ATOM IN A MAGNETIC FIELD

2006 ◽  
Vol 15 (06) ◽  
pp. 1263-1271 ◽  
Author(s):  
A. SOYLU ◽  
O. BAYRAK ◽  
I. BOZTOSUN
Keyword(s):  
Magnetic Field ◽  
Hydrogen Atom ◽  
Iteration Method ◽  
Weak Magnetic Field ◽  
The Other ◽  
Asymptotic Iteration Method ◽  
Iterative Approach ◽  
Two Dimensional ◽  
Energy Eigenvalues ◽  
The Magnetic Field

In this paper, the energy eigenvalues of the two dimensional hydrogen atom are presented for the arbitrary Larmor frequencies by using the asymptotic iteration method. We first show the energy eigenvalues for the case with no magnetic field analytically, and then we obtain the energy eigenvalues for the strong and weak magnetic field cases within an iterative approach for n=2-10 and m=0-1 states for several different arbitrary Larmor frequencies. The effect of the magnetic field on the energy eigenvalues is determined precisely. The results are in excellent agreement with the findings of the other methods and our method works for the cases where the others fail.

scholarly journals The influence of resistivity gradients on shock conditions for a Petschek reconnection geometry

2016 ◽  
Vol 34 (4) ◽  
pp. 421-425
Author(s):  
Christian Nabert ◽  
Karl-Heinz Glassmeier
Keyword(s):  
Magnetic Field ◽  
Necessary Conditions ◽  
The Other ◽  
Diffusion Region ◽  
Two Dimensional ◽  
Characteristic Velocity ◽  
Magnetohydrodynamic Equations ◽  
One Dimensional ◽  
The Magnetic Field ◽  
Alfven Velocity

Abstract. Shock waves can strongly influence magnetic reconnection as seen by the slow shocks attached to the diffusion region in Petschek reconnection. We derive necessary conditions for such shocks in a nonuniform resistive magnetohydrodynamic plasma and discuss them with respect to the slow shocks in Petschek reconnection. Expressions for the spatial variation of the velocity and the magnetic field are derived by rearranging terms of the resistive magnetohydrodynamic equations without solving them. These expressions contain removable singularities if the flow velocity of the plasma equals a certain characteristic velocity depending on the other flow quantities. Such a singularity can be related to the strong spatial variations across a shock. In contrast to the analysis of Rankine–Hugoniot relations, the investigation of these singularities allows us to take the finite resistivity into account. Starting from considering perpendicular shocks in a simplified one-dimensional geometry to introduce the approach, shock conditions for a more general two-dimensional situation are derived. Then the latter relations are limited to an incompressible plasma to consider the subcritical slow shocks of Petschek reconnection. A gradient of the resistivity significantly modifies the characteristic velocity of wave propagation. The corresponding relations show that a gradient of the resistivity can lower the characteristic Alfvén velocity to an effective Alfvén velocity. This can strongly impact the conditions for shocks in a Petschek reconnection geometry.

scholarly journals Heat Transfer to MHD Oscillatory Viscoelastic Flow in a Channel Filled with Porous Medium

2012 ◽  
Vol 2012 ◽  
pp. 1-5 ◽  
Author(s):  
Rita Choudhury ◽  
Utpal Jyoti Das
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Porous Medium ◽  
Radiative Heat ◽  
Saturated Porous Medium ◽  
Transverse Magnetic ◽  
Viscoelastic Flow ◽  
Viscoelastic Parameter ◽  
Flow Parameters ◽  
The Magnetic Field

The combined effect of a transverse magnetic field and radiative heat transfer on unsteady flow of a conducting optically thin viscoelastic fluid through a channel filled with saturated porous medium and nonuniform walls temperature has been discussed. It is assumed that the fluid has small electrical conductivity and the electromagnetic force produced is very small. Closed-form analytical solutions are constructed for the problem. The effects of the radiation and the magnetic field parameters on velocity profile and shear stress for different values of the viscoelastic parameter with the combination of the other flow parameters are illustrated graphically, and physical aspects of the problem are discussed.

scholarly journals INCREASING THE EFFICIENCY OF MULTY-VARIANT CALCULATIONS OF ELECTROMAGNETIC FIELD DISTRIBUTION IN MATRIX OF A POLYGRADIENT SEPARATOR

2021 ◽  
Author(s):  
Jasim Mohmed Jasim Jasim ◽  
Iryna Shvedchykova ◽  
Igor Panasiuk ◽  
Julia Romanchenko ◽  
Inna Melkonova
Keyword(s):  
Magnetic Field ◽  
Field Distribution ◽  
Three Dimensional ◽  
Magnetic Potential ◽  
Geometric Parameters ◽  
Two Dimensional ◽  
Air Gaps ◽  
Vector Magnetic Potential ◽  
Electromagnetic Separator ◽  
The Magnetic Field

An approach is proposed to carry out multivariate calculations of the magnetic field distribution in the working gaps of a plate polygradient matrix of an electromagnetic separator, based on a combination of the advantages of two- and three-dimensional computer modeling. Two-dimensional geometric models of computational domains are developed, which differ in the geometric dimensions of the plate matrix elements and working air gaps. To determine the vector magnetic potential at the boundaries of two-dimensional computational domains, a computational 3D experiment is carried out. For this, three variants of the electromagnetic separator are selected, which differ in the size of the working air gaps of the polygradient matrices. For them, three-dimensional computer models are built, the spatial distribution of the magnetic field in the working intervals of the electromagnetic separator matrix and the obtained numerical values of the vector magnetic potential at the boundaries of the computational domains are investigated. The determination of the values of the vector magnetic potential for all other models is carried out by interpolation. The obtained values of the vector magnetic potential are used to set the boundary conditions in a computational 2D experiment. An approach to the choice of a rational version of a lamellar matrix is substantiated, which provides a solution to the problem according to the criterion of the effective area of the working area. Using the method of simple enumeration, a variant of the structure of a polygradient matrix with rational geometric parameters is selected. The productivity of the electromagnetic separator with rational geometric parameters of the matrix increased by 3–5 % with the same efficiency of extraction of ferromagnetic inclusions in comparison with the basic version of the device

scholarly journals Magnetorheological Fluids Behaviour in Oscillatory Compression Squeeze: Experimental Testing and Analysis

2019 ◽  
Vol 13 (4) ◽  
pp. 221-225
Author(s):  
Wojciech Horak ◽  
Marcin Szczęch ◽  
Bogdan Sapiński
Keyword(s):  
Magnetic Field ◽  
Volume Fraction ◽  
Experimental Testing ◽  
Magnetic Field Gradient ◽  
Particle Volume Fraction ◽  
Excitation Frequency ◽  
Magnetorheological Fluid ◽  
Density Level ◽  
Particle Volume ◽  
The Magnetic Field

Abstract This article deals with experimental testing of magnetorheological fluid (MRF) behaviour in the oscillatory squeeze mode. The authors investigate and analyse the influence of excitation frequency and magnetic field density level on axial force in MRFs that differ in particle volume fraction. The results show that, under certain conditions, the phenomenon of self-sealing can occur as a result of the magnetic field gradient and a vacuum in the working gap of the system.

scholarly journals Research on convective heat transfer characteristics of Fe3O4magnetic nanofluids under vertical magnetic field

2021 ◽  
pp. 151-151
Author(s):  
Ruihao Zhang ◽  
Sixian Wang ◽  
Shan Qing ◽  
Zhumei Luo ◽  
Zhang Xiaohui
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Reynolds Number ◽  
Field Strength ◽  
Convective Heat Transfer ◽  
Magnetic Field Strength ◽  
Convective Heat ◽  
Heat Transfer Characteristics ◽  
Magnetic Nanofluids ◽  
The Magnetic Field

This paper focuses on the convective heat transfer characteristics of Fe3O4 /Water magnetic nanofluids under laminar and turbulent conditions. After verifying the accuracy of the experimental apparatus, the effects of magnetic field strength, concentration, Reynolds number and temperature on the convective heat transfer coefficient have been studied. The convective heat transfer characteristics of nanofluids under laminar and turbulent flow conditions were studied in depth, and the influence of each factor on the heat transfer coefficient was analyzed by orthogonal experimental design method. Under the laminar flow conditions, the convective heat transfer of magnetic nanofluids performed best when the Reynolds number was 2000, the magnetic field strength was 600, the temperature was 30? and the concentration was 2%. And the convective heat transfer coefficient (h) increased by 3.96% than the distilled water in the same conditions. In turbulent state, the convective heat transfer of magnetic nanofluids performed the best when the Re was 6000, the magnetic field strength was 600, the temperature was 40? and the concentration was 2%. The h increased by 11.31% than the distilled water in the same Reynolds number and the magnetic field strength conditions.

Sign in / Sign up

Export Citation Format

Share Document