scholarly journals Acoustic streaming and the induced forces between two spheres

2016 ◽  
Vol 810 ◽  
pp. 378-391 ◽  
Author(s):  
D. Fabre ◽  
J. Jalal ◽  
J. S. Leontini ◽  
R. Manasseh
Keyword(s):  
Acoustic Streaming ◽  
Lateral Force ◽  
Oscillating Flow ◽  
Low Frequencies ◽  
High Frequencies ◽  
Steady Streaming ◽  
The Mean ◽  
Linear Problems ◽  
Parameter Measuring ◽  
Dimensional Domain

The ability of acoustic microstreaming to cause a pair of particles to attract or repel is investigated. Expanding the flow around two spheres in terms of a small-amplitude parameter measuring the amplitude of the forcing, the leading order is an oscillating flow field with zero mean representing the effect of the applied acoustic field, while the second-order correction contains a steady streaming component. A modal decomposition in the azimuthal direction reduces the problem to a few linear problems in a two-dimensional domain corresponding to the meridional ($r,z$) plane. The analysis computes both the intricate flow fields and the mean forces felt by both spheres. If the spheres are aligned obliquely with respect to the oscillating flow, they experience a lateral force which realigns them into a transverse configuration. In this transverse configuration, they experience an axial force which can be either attractive or repulsive. At high frequencies the force is always attractive. At low frequencies, it is repulsive. At intermediate frequencies, the force is attractive at large distances and repulsive at small distances, leading to the existence of a stable equilibrium configuration.

scholarly journals 2012 Dahlberg Award Winner Dental morphological variation among six Pre-Hispanic South American populations with implications for the peopling of the New World

2018 ◽  
Vol 26 (1-2) ◽  
pp. 20-32 ◽  
Author(s):  
Alejandra Ortiz
Keyword(s):  
New World ◽  
South American ◽  
Northern Coast ◽  
State University ◽  
Arizona State University ◽  
Dental Anthropology ◽  
Low Frequencies ◽  
High Frequencies ◽  
Statistical Program ◽  
The Mean

The analysis of the human dentition pro-vides important information on the origins and dispersals of the first American inhabitants. However, most of this work has focused on North America, whereas less research has been devoted to variation within Central and South America. This study examines the permanent dentitions of 340 individuals from six pre-Hispanic South American populations and places them in the broader context of the peopling of the New World. Non-metric dental data were collected using the Arizona State University Dental Anthropology System (ASUDAS). Intra- and inter-regional comparisons were assessed using the Mean Measure of Divergence statistical program. All samples are characterized by relatively high frequencies of UM1 enamel extension and LM1 deflecting wrinkle and low frequencies of UM1 cusp 5 and LM2 Y-groove pattern. Although preliminary, results indicate that populations from Chile, Venezuela and Peru-Northern Coast are dentally similar and follow the Sinodont dental pattern. The Peru-Southern Highlands sample is the most divergent of the South American groups examined, showing the closest affinities with Sundadonts. Finally, no clear pattern was found for Bolivia and Peru-Amazonian Andes, as most of their trait frequencies fall within the range of overlap between Sinodont and Sundadont populations.

Stratigraphic filter theory: Combined effects of parallel bedding and random inhomogeneities

Geophysics ◽  
1986 ◽  
Vol 51 (8) ◽  
pp. 1531-1537 ◽  
Author(s):  
I. Lerche
Keyword(s):  
Time Delay ◽  
Power Spectrum ◽  
Layered Medium ◽  
Mean Field ◽  
Power Spectra ◽  
Low Frequencies ◽  
High Frequencies ◽  
Bedding Planes ◽  
Scattering Centers ◽  
The Mean

Mean field renormalization techniques determine the phase distortion (time delay) and effective attenuation as functions of frequency for a plane acoustic wave, normally incident on a layered medium, when the medium also contains a distribution of scattering centers at random sites. The power spectra of impedance fluctuations of both the bedding layers and the random centers contribute to the time delay and mean field effective attenuation. At low frequencies (long wavelengths), the power spectrum of the bedding planes dominates the mean wave response, producing most of the time delay and the effective attenuation. At high frequencies (short wavelengths), the random scattering centers dominate the mean wave behavior. The wave no longer propagates exactly perpendicularly to bedding planes since the random scattering centers cast energy into directions transverse to the normal to the bedding planes. The precise frequency dependence of both the time delay and the effective attenuation of the mean wave are sensitive to the power spectrum of impedance fluctuations of the bedding planes relative to the power spectrum of the random scattering centers.

Hydrodynamic Flows in Electrowetting

2008 ◽  
Author(s):  
Sung Hee Ko ◽  
Horim Lee ◽  
Kwan Hyoung Kang
Keyword(s):  
Electric Field ◽  
High Speed ◽  
Strong Electric Field ◽  
Electrical Signal ◽  
Droplet Surface ◽  
Electrohydrodynamic Flow ◽  
Low Frequencies ◽  
High Frequencies ◽  
Steady Streaming ◽  
Flow Generation

In this work, we found experimentally that there exist fairly strong fluid flows in AC electrowetting, which can be utilized as a means to mix the fluids in EWOD-based micro-devices. We visualized the internal flow. There may exist two distinct flow-generation mechanisms; one is the droplet oscillation, and the other is the electrohydrodynamic flow. The flow pattern is significantly dependent on the applied AC frequency. At low frequencies (represented here by 1 kHz), the center of the vortices is located somewhat randomly and the flow directs upward near the symmetric axis. At high frequencies (represented by 128 kHz), however, a pair of vortices having quite a regular structure is clearly visible and the flow directs downward near the symmetric axis. The flow patterns are strongly dependent on the position of the point electrode. The droplet surface undergoes a periodic oscillation (visualized by a high-speed camera) with a frequency exactly twice the frequency of applied electrical signal. The oscillating interface can generate a steady streaming. However the numerical results show that there exists no electric field at low AC frequencies. On the contrary, there exists quite a strong electric field inside the droplet at high frequencies. It means the electrohydrodynamic flow cannot be generated at the low frequency region, and the droplet oscillation might cause the flow generation at low frequencies. We also demonstrated the flow can be beneficially utilized as a mixing method.

Effect of Blowing Agent on Cell Morphology and Acoustic Absorption of Natural Rubber Foam

2015 ◽  
Vol 804 ◽  
pp. 25-29 ◽  
Author(s):  
Wanlop Harnnarongchai ◽  
Kantima Chaochanchaikul
Keyword(s):  
Natural Rubber ◽  
Cell Size ◽  
Cell Morphology ◽  
Foam Cell ◽  
Adsorption Coefficient ◽  
Low Frequencies ◽  
Potassium Oleate ◽  
High Frequencies ◽  
Blowing Agent ◽  
Open Cell Foam

The sound absorbing efficiency of natural rubber (NR) foam is affected by the cell morphology of foam. Potassium oleate (K-oleate) and sodium bicarbonate (NaHCO3) were used as blowing agents to create open-cell foam. Amounts of the blowing agent were varied from 0.5 to 8.0 part per hundred of rubber (phr) to evaluate cell size and number of foam cell as well as sound adsorption coefficient of NR foam. The NR foam specimens were prepared using mould and air-circulating oven for vulcanizing and foaming processes. The results indicated that K-oleate at 2.0 phr and NaHCO3 at 0.5 phr led to form NR foam with the smallest cell size and the largest number of foam cell. At low frequencies, the optimum sound adsorption coefficient of NR foam was caused by filling K-oleate 2 phr. However, that of NR foam at high frequencies was provided by 0.5 phr-NaHCO3 addition.

Hearing loss in diabetics

1993 ◽  
Vol 107 (3) ◽  
pp. 179-182 ◽  
Author(s):  
J. R. Cullen ◽  
M. J. Cinnamond
Keyword(s):  
Hearing Loss ◽  
Sensorineural Deafness ◽  
Insulin Dosage ◽  
Speech Discrimination ◽  
Low Frequencies ◽  
High Frequencies ◽  
History Of ◽  
Insulin Dependent ◽  
Stapedial Reflex ◽  
The Relationship

The relationship between diabetes and senbsorineural hearing loss has been disputed. This study compares 44 insulin-dependent diabetics with 38 age and sex matched controls. All had pure tone and speech audiometry performed, with any diabetics showing sensorineural deafness undergoing stapedial reflecx decat tests. In 14 diabetics stapedial reflex tests showed no tone decay in any patient, but seven showed evidence of recruitment. Analysis of vaiance showed the diabetics to be significantly deafer than the control population.The hearing loss affected high frequencies in both sexes, but also low frequencies in the male. Speech discrimination scores showed no differences. Further analysis by sex showed the males to account for most of the differences. Analysys of the audiograms showered mostly a high tone loss. Finally duration of disbetes, insulin dosage and family history of diabtes were not found to have a significant effect on threshold.

Use of Measured Mobility to Improve SEA Predictions in the Mid-Frequency Range

1999 ◽  
Author(s):  
Jerome E. Manning
Keyword(s):  
Dynamic Systems ◽  
Broad Band ◽  
Measured Data ◽  
Hybrid Technique ◽  
Complex Dynamic ◽  
Low Frequencies ◽  
Large Variability ◽  
High Frequencies ◽  
Complex Dynamic Systems ◽  
Light Coupling

Abstract Statistical energy analysis provides a technique to predict acoustic and vibration levels in complex dynamic systems. The technique is most useful for broad-band excitation at high frequencies where many modes contribute to the response in any given frequency band. At mid and low frequencies, the number of modes contributing to the response may be quite small. In this case SEA predictions show large variability from measured data and may not be useful for vibroacoustic design. This paper focuses on the use of measured data to improve the accuracy of the predictions. Past work to measure the SEA coupling and damping loss factors has not been successful for a broad range of systems that do not have light coupling. This paper introduces a new hybrid SEA technique that combines measured mobility functions with analytical SEA predictions. The accuracy of the hybrid technique is shown to be greatly improved at mid and low frequencies.

Frequency-Weighted Variable-Length Controllers Using Anytime Control Strategies

2011 ◽  
Author(s):  
Gundula B. Runge ◽  
Al Ferri ◽  
Bonnie Ferri
Keyword(s):  
Time Scale ◽  
Weighting Function ◽  
Control Strategies ◽  
Low Frequency ◽  
Low Frequencies ◽  
High Frequencies ◽  
Frequency Components ◽  
Computational Resources ◽  
Weighted Variable ◽  
Selection Of

This paper considers an anytime strategy to implement controllers that react to changing computational resources. The anytime controllers developed in this paper are suitable for cases when the time scale of switching is in the order of the task execution time, that is, on the time scale found commonly with sporadically missed deadlines. This paper extends the prior work by developing frequency-weighted anytime controllers. The selection of the weighting function is driven by the expectation of the situations that would require anytime operation. For example, if the anytime operation is due to occasional and isolated missed deadlines, then the weighting on high frequencies should be larger than that for low frequencies. Low frequency components will have a smaller change over one sample time, so failing to update these components for one sample period will have less effect than with the high frequency components. An example will be included that applies the anytime control strategy to a model of a DC motor with deadzone and saturation nonlinearities.

scholarly journals The Estimation of Hydrometeor Profiles from Wideband Microwave Observations

2000 ◽  
Vol 39 (10) ◽  
pp. 1645-1656 ◽  
Author(s):  
Gail M. Skofronick-Jackson ◽  
James R. Wang
Keyword(s):  
High Frequency ◽  
Cloud Water ◽  
Tropical Ocean ◽  
Low Frequencies ◽  
High Frequencies ◽  
Atmospheric Research ◽  
Brightness Temperatures ◽  
Microphysical Properties ◽  
Ice Microphysics ◽  
Updraft Region

Abstract Profiles of the microphysical properties of clouds and rain cells are essential in many areas of atmospheric research and operational meteorology. To enhance the understanding of the nonlinear and underconstrained relationships between cloud and hydrometeor microphysical profiles and passive microwave brightness temperatures, estimations of cloud profiles for an anvil region, a convective region, and an updraft region of an oceanic squall were performed. The estimations relied on comparisons between radiative transfer calculations of incrementally estimated microphysical profiles and concurrent dual-altitude wideband brightness temperatures from the 22 February 1993 flight during the Tropical Ocean and Global Atmosphere Coupled Ocean–Atmosphere Response Experiment. The wideband observations (10–220 GHz) are necessary for estimating cloud profiles reaching up to 20 km. The low frequencies enhance the rain and cloud water profiles, and the high frequencies are required to detail the higher-altitude ice microphysics. A microphysical profile was estimated for each of the three regions of the storm. Each of the three estimated profiles produced calculated brightness temperatures within ∼10 K of the observations. A majority of the total iterative adjustments were to the estimated profile’s frozen hydrometeor characteristics and were necessary to match the high-frequency calculations with the observations. This requirement indicates a need to validate cloud-resolving models using high frequencies. Some difficulties matching the 37-GHz observation channels on the DC-8 and ER-2 aircraft with the calculations simulated at the two aircraft heights (∼11 km and 20 km, respectively) were noted, and potential causes were presented.

scholarly journals THE PECULIARITIES OF THE SOUND FIELD ENERGY DECAY IN A ROOM WITH THE USE OF DIFFERENT PULSED SOUND SOURCES/GARSO LAUKO ENERGIJOS SLOPIMO PATALPOJE YPATUMAI, NAUDOJANT SKIRTINGUS IMPULSINIUS GARSO ŠALTINIUS

1999 ◽  
Vol 5 (2) ◽  
pp. 135-140
Author(s):  
Vytautas Stauskis
Keyword(s):  
Noise Level ◽  
Sound Field ◽  
Maximum Energy ◽  
Reverberation Time ◽  
Frequency Range ◽  
Sound Sources ◽  
Low Frequencies ◽  
High Frequencies ◽  
The Difference ◽  
Field Decay

The paper deals with the differences between the energy created by four different pulsed sound sources, ie a sound gun, a start gun, a toy gun, and a hunting gun. A knowledge of the differences between the maximum energy and the minimum energy, or the signal-noise ratio, is necessary to correctly calculate the frequency dependence of reverberation time. It has been established by investigations that the maximum energy excited by the sound gun is within the frequency range of 250 to 2000 Hz. It decreases by about 28 dB at the low frequencies. The character of change in the energy created by the hunting gun differs from that of the sound gun. There is no change in the maximum energy within the frequency range of 63–100 Hz, whereas afterwards it increases with the increase in frequency but only to the limit of 2000 Hz. In the frequency range of 63–500 Hz, the energy excited by the hunting gun is lower by 15–30 dB than that of the sound gun. As frequency increases the difference is reduced and amounts to 5–10 dB. The maximum energy of the start gun is lower by 4–5 dB than that of the hunting gun in the frequency range of up to 1000 Hz, while afterwards the difference is insignificant. In the frequency range of 125–250 Hz, the maximum energy generated by the sound gun exceeds that generated by the hunting gun by 20 dB, that by the start gun by 25 dB, and that by the toy gun—by as much as 35 dB. The maximum energy emitted by it occupies a wide frequency range of 250 to 2000 Hz. Thus, the sound gun has an advantage over the other three sound sources from the point of view of maximum energy. Up until 500 Hz the character of change in the direct sound energy is similar for all types of sources. The maximum energy of direct sound is also created by the sound gun and it increases along with frequency, the maximum values being reached at 500 Hz and 1000 Hz. The maximum energy of the hunting gun in the frequency range of 125—500 Hz is lower by about 20 dB than that of the sound gun, while the maximum energy of the toy gun is lower by about 25 dB. The maximum of the direct sound energy generated by the hunting gun, the start gun and the toy gun is found at high frequencies, ie at 1000 Hz and 2000 Hz, while the sound gun generates the maximum energy at 500 Hz and 1000 Hz. Thus, the best results are obtained when the energy is emitted by the sound gun. When the sound field is generated by the sound gun, the difference between the maximum energy and the noise level is about 35 dB at 63 Hz, while the use of the hunting gun reduces the difference to about 20–22 dB. The start gun emits only small quantities of low frequencies and is not suitable for room's acoustical analysis at 63 Hz. At the frequency of 80 Hz, the difference between the maximum energy and the noise level makes up about 50 dB, when the sound field is generated by the sound gun, and about 27 dB, when it is generated by the hunting gun. When the start gun is used, the difference between the maximum signal and the noise level is as small as 20 dB, which is not sufficient to make a reverberation time analysis correctly. At the frequency of 100 Hz, the difference of about 55 dB between the maximum energy and the noise level is only achieved by the sound gun. The hunting gun, the start gun and the toy gun create the decrease of about 25 dB, which is not sufficient for the calculation of the reverberation time. At the frequency of 125 Hz, a sufficiently large difference in the sound field decay amounting to about 40 dB is created by the sound gun, the hunting gun and the start gun, though the character of the sound field curve decay of the latter is different from the former two. At 250 Hz, the sound gun produces a field decay difference of almost 60 dB, the hunting gun almost 50 dB, the start gun almost 40 dB, and the toy gun about 45 dB. At 500 Hz, the sound field decay is sufficient when any of the four sound sources is used. The energy difference created by the sound gun is as large as 70 dB, by the hunting gun 50 dB, by the start gun 52 dB, and by the toy gun 48 dB. Such energy differences are sufficient for the analysis of acoustic indicators. At the high frequencies of 1000 to 4000 Hz, all the four sound sources used, even the toy gun, produce a good difference of the sound field decay and in all cases it is possible to analyse the reverberation process at varied intervals of the sound level decay.

Sign in / Sign up

Export Citation Format

Share Document