Compressibility effects in the shear layer over a rectangular cavity

2016 ◽  
Vol 808 ◽  
pp. 116-152 ◽  
Author(s):  
Steven J. Beresh ◽  
Justin L. Wagner ◽  
Katya M. Casper
Keyword(s):  
Growth Rate ◽  
Shear Stress ◽  
Mach Number ◽  
Shear Layer ◽  
Vertical Component ◽  
Particle Image Velocimetry Data ◽  
Rectangular Cavity ◽  
Turbulent Shear ◽  
Number Range ◽  
Turbulent Shear Stress

The influence of compressibility on the shear layer over a rectangular cavity of variable width has been studied in a free stream Mach number range of 0.6–2.5 using particle image velocimetry data in the streamwise centre plane. As the Mach number increases, the vertical component of the turbulence intensity diminishes modestly in the widest cavity, but the two narrower cavities show a more substantial drop in all three components as well as the turbulent shear stress. This contrasts with canonical free shear layers, which show significant reductions in only the vertical component and the turbulent shear stress due to compressibility. The vorticity thickness of the cavity shear layer grows rapidly as it initially develops, then transitions to a slower growth rate once its instability saturates. When normalized by their estimated incompressible values, the growth rates prior to saturation display the classic compressibility effect of suppression as the convective Mach number rises, in excellent agreement with comparable free shear layer data. The specific trend of the reduction in growth rate due to compressibility is modified by the cavity width.

A study of compressibility effects in the high-speed turbulent shear layer using direct simulation

2002 ◽  
Vol 451 ◽  
pp. 329-371 ◽  
Author(s):  
C. PANTANO ◽  
S. SARKAR
Keyword(s):  
Growth Rate ◽  
Shear Stress ◽  
Mach Number ◽  
Shear Layer ◽  
Time Scale ◽  
High Speed ◽  
Turbulent Shear ◽  
Momentum Thickness ◽  
Turbulent Shear Layer ◽  
Convective Mach Number

Direct simulations of the turbulent shear layer are performed for subsonic to supersonic Mach numbers. Fully developed turbulence is achieved with profiles of mean velocity and turbulence intensities that agree well with laboratory experiments. The thickness growth rate of the shear layer exhibits a large reduction with increasing values of the convective Mach number, Mc. In agreement with previous investigations, it is found that the normalized pressure–strain term decreases with increasing Mc, which leads to inhibited energy transfer from the streamwise to cross-stream fluctuations, to the reduced turbulence production observed in DNS, and, finally, to reduced turbulence levels as well as reduced growth rate of the shear layer. An analysis, based on the wave equation for pressure, with supporting DNS is performed with the result that the pressure–strain term decreases monotonically with increasing Mach number. The gradient Mach number, which is the ratio of the acoustic time scale to the flow distortion time scale, is shown explicitly by the analysis to be the key quantity that determines the reduction of the pressure–strain term in compressible shear flows. The physical explanation is that the finite speed of sound in compressible flow introduces a finite time delay in the transmission of pressure signals from one point to an adjacent point and the resultant increase in decorrelation leads to a reduction in the pressure–strain correlation.The dependence of turbulence intensities on the convective Mach number is investigated. It is found that all components decrease with increasing Mc and so does the shear stress.DNS is also used to study the effect of different free-stream densities parameterized by the density ratio, s = ρ2/ρ1, in the high-speed case. It is found that changes in the temporal growth rate of the vorticity thickness are smaller than the changes observed in momentum thickness growth rate. The momentum thickness growth rate decreases substantially with increasing departure from the reference case, s = 1. The peak value of the shear stress, uv, shows only small changes as a function of s. The dividing streamline of the shear layer is observed to move into the low-density stream. An analysis is performed to explain this shift and the consequent reduction in momentum thickness growth rate.

Mechanisms of Turbulence Transport in a Turbine Blade Coolant Passage With a Rib Turbulator

1999 ◽  
Vol 121 (1) ◽  
pp. 152-159 ◽  
Author(s):  
P. K. Panigrahi ◽  
S. Acharya
Keyword(s):  
Boundary Layer ◽  
Shear Stress ◽  
Turbulent Boundary Layer ◽  
Shear Layer ◽  
Large Scale ◽  
Turbulence Models ◽  
Turbulent Shear ◽  
Large Scale Structures ◽  
Turbulent Shear Stress ◽  
Scale Structures

This paper provides detailed measurements of the flow in a ribbed coolant passage, and attempts to delineate the important mechanisms that contribute to the production of turbulent shear stress and the normal stresses. It is shown that the separated flow behind the rib is dictated by large-scale structures, and that the dynamics of the large-scale structures, associated with sweep, ejection, and inward and outward interactions, all play an important role in the production of the turbulent shear stress. Unlike the turbulent boundary layer, in a separated shear flow past the rib, the inward and outward interaction terms are both important, accounting for a negative stress production that is nearly half of the positive stress produced by the ejection and sweep mechanisms. It is further shown that the shear layer wake persists well past the re-attachment location of the shear layer, implying that the flow between ribbed passages never recovers to that of a turbulent boundary layer. Therefore, even past re-attachment, the use of statistical turbulence models that ignore coherent structure dynamics is inappropriate.

Separated Flow Transition Under Simulated Low-Pressure Turbine Airfoil Conditions—Part 1: Mean Flow and Turbulence Statistics

2002 ◽  
Vol 124 (4) ◽  
pp. 645-655 ◽  
Author(s):  
Ralph J. Volino
Keyword(s):  
Boundary Layer ◽  
Shear Stress ◽  
Shear Layer ◽  
Free Stream ◽  
Low Pressure ◽  
Turbulent Shear ◽  
Trailing Edge ◽  
Free Stream Turbulence ◽  
Low Pressure Turbine ◽  
Turbulent Shear Stress

Boundary layer separation, transition and reattachment have been studied experimentally under low-pressure turbine airfoil conditions. Cases with Reynolds numbers (Re) ranging from 25,000 to 300,000 (based on suction surface length and exit velocity) have been considered at low (0.5%) and high (9% inlet) free-stream turbulence levels. Mean and fluctuating velocity and intermittency profiles are presented for streamwise locations all along the airfoil, and turbulent shear stress profiles are provided for the downstream region where separation and transition occur. Higher Re or free-stream turbulence level moves transition upstream. Transition is initiated in the shear layer over the separation bubble and leads to rapid boundary layer reattachment. At the lowest Re, transition did not occur before the trailing edge, and the boundary layer did not reattach. Turbulent shear stress levels can remain low in spite of high free-stream turbulence and high fluctuating streamwise velocity in the shear layer. The beginning of a significant rise in the turbulent shear stress signals the beginning of transition. A slight rise in the turbulent shear stress near the trailing edge was noted even in those cases which did not undergo transition or reattachment. The present results provide detailed documentation of the boundary layer and extend the existing database to lower Re. The present results also serve as a baseline for an investigation of turbulence spectra in Part 2 of the present paper, and for ongoing work involving transition and separation control.

scholarly journals Mechanisms of Turbulence Transport in a Turbine Blade Coolant Passage With a Rib-Turbulator

1997 ◽  
Author(s):  
P. K. Panigrahi ◽  
S. Acharya
Keyword(s):  
Boundary Layer ◽  
Shear Stress ◽  
Turbulent Boundary Layer ◽  
Shear Layer ◽  
Large Scale ◽  
Turbulence Models ◽  
Turbulent Shear ◽  
Large Scale Structures ◽  
Turbulent Shear Stress ◽  
Scale Structures

This paper provides detailed measurements of the flow in a ribbed coolant passage, and attempts to delineate the important mechanisms that contribute to the production of turbulent shear stress and the normal stresses. It is shown that the separated flow behind the rib is dictated by large scale structures, and that the dynamics of the large scale structures, associated with sweep, ejection, and inward and outward interactions all play an important role in the production of the turbulent shear stress. Unlike the turbulent boundary layer, in a separated shear flow past the rib, the inward and outward interaction terms are both important accounting for a negative stress production that is nearly half of the positive stress produced by the ejection and sweep mechanisms. It is further shown, that the shear layer wake persists well past the re-attachment location of the shear layer, implying that the flow between ribbed passages never recovers to that of a turbulent boundary layer. Therefore, even past re-attachment, the use of statistical turbulence models that ignore coherent structure dynamics is inappropriate.

Separated Flow Transition Under Simulated Low-Pressure Turbine Airfoil Conditions: Part 1 — Mean Flow and Turbulence Statistics

2002 ◽  
Author(s):  
Ralph J. Volino
Keyword(s):  
Boundary Layer ◽  
Shear Stress ◽  
Shear Layer ◽  
Free Stream ◽  
Low Pressure ◽  
Turbulent Shear ◽  
Trailing Edge ◽  
Free Stream Turbulence ◽  
Low Pressure Turbine ◽  
Turbulent Shear Stress

Boundary layer separation, transition and reattachment have been studied experimentally under low-pressure turbine airfoil conditions. Cases with Reynolds numbers (Re) ranging from 25,000 to 300,000 (based on suction surface length and exit velocity) have been considered at low (0.5%) and high (9% inlet) free-stream turbulence levels. Mean and fluctuating velocity and intermittency profiles are presented for streamwise locations all along the airfoil, and turbulent shear stress profiles are provided for the downstream region where separation and transition occur. Higher Re or free-stream turbulence level moves transition upstream. Transition is initiated in the shear layer over the separation bubble and leads to rapid boundary layer reattachment. At the lowest Re, transition did not occur before the trailing edge, and the boundary layer did not reattach. Turbulent shear stress levels can remain low in spite of high free-stream turbulence and high fluctuating streamwise velocity in the shear layer. The beginning of a significant rise in the turbulent shear stress signals the beginning of transition. A slight rise in the turbulent shear stress near the trailing edge was noted even in those cases which did not undergo transition or reattachment. The present results provide detailed documentation of the boundary layer and extend the existing database to lower Re. The present results also serve as a baseline for an investigation of turbulence spectra in Part 2 of the present paper, and for ongoing work involving transition and separation control.

scholarly journals The compressible turbulent shear layer: an experimental study

1988 ◽  
Vol 197 ◽  
pp. 453-477 ◽  
Author(s):  
Dimitri Papamoschou ◽  
Anatol Roshko
Keyword(s):  
Growth Rate ◽  
Mach Number ◽  
Shear Layer ◽  
Large Scale ◽  
Turbulent Shear ◽  
Plane Shear ◽  
Compressibility Effect ◽  
Pressure Profiles ◽  
Mach Numbers ◽  
Convective Mach Number

The growth rate and turbulent structure of the compressible, plane shear layer are investigated experimentally in a novel facility. In this facility, it is possible to flow similar or dissimilar gases of different densities and to select different Mach numbers for each stream. Ten combinations of gases and Mach numbers are studied in which the free-stream Mach numbers range from 0.2 to 4. Schlieren photography of 20-ns exposure time reveals very low spreading rates and large-scale structures. The growth of the turbulent region is defined by means of Pitot-pressure profiles measured at several streamwise locations. A compressibility-effect parameter is defined that correlates and unifies the experimental results. It is the Mach number in a coordinate system convecting with the velocity of the dominant waves and structures of the shear layer, called here the convective Mach number. It happens to have nearly the same value for each stream. In the current experiments, it ranges from 0 to 1.9. The correlations of the growth rate with convective Mach number fall approximately onto one curve when the growth rate is normalized by its incompressible value at the same velocity and density ratios. The normalized growth rate, which is unity for incompressible flow, decreases rapidly with increasing convective Mach number, reaching an asymptotic vaue of about 0.2 for supersonic convective Mach numbers.

Impact of fluid turbulent shear stress on failure surface of reservoir bank landslide

2018 ◽  
Vol 11 (22) ◽  
Author(s):  
Xuan Zhang ◽  
Liang Chen ◽  
Faming Zhang ◽  
Chengteng Lv ◽  
Yi feng Zhou
Keyword(s):  
Shear Stress ◽  
Failure Surface ◽  
Turbulent Shear ◽  
Turbulent Shear Stress

Contribution towards a Reynolds-stress closure for low-Reynolds-number turbulence

1976 ◽  
Vol 74 (4) ◽  
pp. 593-610 ◽  
Author(s):  
K. Hanjalić ◽  
B. E. Launder
Keyword(s):  
Reynolds Number ◽  
Shear Stress ◽  
Reynolds Stress ◽  
Dissipation Rate ◽  
Numerical Solutions ◽  
Low Reynolds Number ◽  
Transport Processes ◽  
Turbulent Shear ◽  
Turbulent Shear Stress ◽  
Low Reynolds

The problem of closing the Reynolds-stress and dissipation-rate equations at low Reynolds numbers is considered, specific forms being suggested for the direct effects of viscosity on the various transport processes. By noting that the correlation coefficient$\overline{uv^2}/\overline{u^2}\overline{v^2} $is nearly constant over a considerable portion of the low-Reynolds-number region adjacent to a wall the closure is simplified to one requiring the solution of approximated transport equations for only the turbulent shear stress, the turbulent kinetic energy and the energy dissipation rate. Numerical solutions are presented for turbulent channel flow and sink flows at low Reynolds number as well as a case of a severely accelerated boundary layer in which the turbulent shear stress becomes negligible compared with the viscous stresses. Agreement with experiment is generally encouraging.

Conditional Sampling in a Transitional Boundary Layer Under High Freestream Turbulence Conditions

2003 ◽  
Vol 125 (1) ◽  
pp. 28-37 ◽  
Author(s):  
Ralph J. Volino ◽  
Michael P. Schultz ◽  
Christopher M. Pratt
Keyword(s):  
Boundary Layer ◽  
Shear Stress ◽  
Streamwise Velocity ◽  
Turbulent Shear ◽  
Conditional Sampling ◽  
Freestream Turbulence ◽  
Mean Velocity ◽  
Transitional Boundary Layer ◽  
Turbulent Shear Stress ◽  
Order Of Magnitude

Conditional sampling has been performed on data from a transitional boundary layer subject to high (initially 9%) freestream turbulence and strong (K=ν/U∞2dU∞/dx as high as 9×10−6) acceleration. Methods for separating the turbulent and nonturbulent zone data based on the instantaneous streamwise velocity and the turbulent shear stress were tested and found to agree. Mean velocity profiles were clearly different in the turbulent and nonturbulent zones, and skin friction coefficients were as much as 70% higher in the turbulent zone. The streamwise fluctuating velocity, in contrast, was only about 10% higher in the turbulent zone. Turbulent shear stress differed by an order of magnitude, and eddy viscosity was three to four times higher in the turbulent zone. Eddy transport in the nonturbulent zone was still significant, however, and the nonturbulent zone did not behave like a laminar boundary layer. Within each of the two zones there was considerable self-similarity from the beginning to the end of transition. This may prove useful for future modeling efforts.

Sign in / Sign up

Export Citation Format

Share Document