Current generation by deep-water breaking waves

2016 ◽  
Vol 803 ◽  
pp. 275-291 ◽  
Author(s):  
N. E. Pizzo ◽  
Luc Deike ◽  
W. Kendall Melville
Keyword(s):  
Wave Field ◽  
Water Column ◽  
Deep Water ◽  
Stokes Equations ◽  
Laboratory Data ◽  
Breaking Waves ◽  
Navier Stokes ◽  
Mean Flow ◽  
Two Phase ◽  
Navier Stokes Equations

We examine the partitioning of the energy transferred to the water column by deep-water wave breaking; in this case between the turbulent and mean flow. It is found that more than 95 % of the energy lost by the wave field is dissipated in the first four wave periods after the breaking event. The remaining energy is in the coherent vortex generated by breaking. A scaling argument shows that the ratio between the energy in this breaking generated mean current and the total energy lost from the wave field to the water column due to breaking scales as $(hk)^{1/2}$, where $hk$ is the local slope at breaking. This model is examined using direct numerical simulations of breaking waves solving the full two-phase air–water Navier–Stokes equations, as well as the limited available laboratory data, and good agreement is found for strong breaking waves.

scholarly journals 3-D Oil spill modelling. Natural dispersion and the spreading of oil-water emulsions in the water column

2013 ◽  
Vol 13 (4) ◽  
pp. 325-338 ◽  
Keyword(s):  
Surface Wave ◽  
Water Column ◽  
Oil Spills ◽  
Stokes Equations ◽  
Probability Model ◽  
Breaking Waves ◽  
Navier Stokes ◽  
Two Phase ◽  
Dispersed Oil ◽  
Oil Emulsions

A 3-D hybrid turbulence model, simulating the transport and fate of oil spills in various waters, is used to evaluate the influence of natural dispersion on the spreading of water-in-oil emulsions formed in the water column. The model combines the Navier-Stokes equations for two-phase flows, the RNG k-ε submodel, and parameterized expressions of the basic processes affecting the fate of oil spills. The model also considers the presence of waves, the wind- and wave- induced surface drifts, and the influence of surface wave breaking on the oil spills. Using a stochastic probability model of breaking waves, the loss of surface wave energy into turbulence, due to breaking, is derived and the rate of natural dispersion of oil mass and that of oilwater emulsions formed in the water column is evaluated, under a variety of sea state conditions. Results in the form of oil concentration profiles with depth, graphs showing the variation of the fraction of water (mass) absorbed by the dispersed oil, at various depths and times, as well as graphs showing the oil mass balance, at the sea surface, at various times are compared with counterpart profiles, and graphs obtained from the literature, and useful conclusions are drawn.

Numerical Modeling of Evolution of Boundary Between Incompressible Gas and Liquid in Two-Dimensional Region

2006 ◽  
Vol 4 ◽  
pp. 224-236
Author(s):  
A.S. Topolnikov
Keyword(s):  
Numerical Modeling ◽  
Interphase Boundary ◽  
Incompressible Liquid ◽  
Stokes Equations ◽  
Numerical Code ◽  
Navier Stokes ◽  
Two Phase ◽  
Navier Stokes Equations ◽  
Incompressible Media ◽  
Good Agreement

The paper is devoted to numerical modeling of Navier–Stokes equations for incompressible media in the case, when there exist gas and liquid inside the rectangular calculation region, which are separated by interphase boundary. The set of equations for incompressible liquid accounting for viscous, gravitational and surface (capillary) forces is solved by finite-difference scheme on the spaced grid, for description of interphase boundary the ideology of Level Set Method is used. By developed numerical code the set of hydrodynamic problems is solved, which describe the motion of two-phase incompressible media with interphase boundary. As a result of numerical simulation the solutions are obtained, which are in good agreement with existing analytical and experimental solutions.

NUMERICAL SIMULATION OF ISOTHERMAL AND THERMAL TWO-PHASE FLOWS USING PHASE-FIELD MODELING

2007 ◽  
Vol 18 (04) ◽  
pp. 536-545 ◽  
Author(s):  
NAOKI TAKADA ◽  
AKIO TOMIYAMA
Keyword(s):  
Phase Field ◽  
Stokes Equations ◽  
Density Ratio ◽  
Navier Stokes ◽  
Phase Field Modeling ◽  
Two Phase Flows ◽  
Two Phase ◽  
Navier Stokes Equations ◽  
Field Modeling ◽  
High Density Ratio

For interface-tracking simulation of two-phase flows in various micro-fluidics devices, we examined the applicability of two versions of computational fluid dynamics method, NS-PFM, combining Navier-Stokes equations with phase-field modeling for interface based on the van der Waals-Cahn-Hilliard free-energy theory. Through the numerical simulations, the following major findings were obtained: (1) The first version of NS-PFM gives good predictions of interfacial shapes and motions in an incompressible, isothermal two-phase fluid with high density ratio on solid surface with heterogeneous wettability. (2) The second version successfully captures liquid-vapor motions with heat and mass transfer across interfaces in phase change of a non-ideal fluid around the critical point.

scholarly journals Do the Volume-of-Fluid and the Two-Phase Euler Compete for Modeling a Spillway Aerator?

Water ◽  
2021 ◽  
Vol 13 (21) ◽  
pp. 3092
Author(s):  
Lourenço Sassetti Mendes ◽  
Javier L. Lara ◽  
Maria Teresa Viseu
Keyword(s):  
Stokes Equations ◽  
Cost Benefit ◽  
Volume Of Fluid ◽  
Navier Stokes ◽  
Type Model ◽  
Two Phase ◽  
Navier Stokes Equations ◽  
Entrained Air ◽  
Computational Resources ◽  
Mesh Convergence

Spillway design is key to the effective and safe operation of dams. Typically, the flow is characterized by high velocity, high levels of turbulence, and aeration. In the last two decades, advances in computational fluid dynamics (CFD) made available several numerical tools to aid hydraulic structures engineers. The most frequent approach is to solve the Reynolds-averaged Navier–Stokes equations using an Euler type model combined with the volume-of-fluid (VoF) method. Regardless of a few applications, the complete two-phase Euler is still considered to demand exorbitant computational resources. An assessment is performed in a spillway offset aerator, comparing the two-phase volume-of-fluid (TPVoF) with the complete two-phase Euler (CTPE). Both models are included in the OpenFOAM® toolbox. As expected, the TPVoF results depend highly on the mesh, not showing convergence in the maximum chute bottom pressure and the lower-nappe aeration, tending to null aeration as resolution increases. The CTPE combined with the k–ω SST Sato turbulence model exhibits the most accurate results and mesh convergence in the lower-nappe aeration. Surprisingly, intermediate mesh resolutions are sufficient to surpass the TPVoF performance with reasonable calculation efforts. Moreover, compressibility, flow bulking, and several entrained air effects in the flow are comprehended. Despite not reproducing all aspects of the flow with acceptable accuracy, the complete two-phase Euler demonstrated an efficient cost-benefit performance and high value in spillway aerated flows. Nonetheless, further developments are expected to enhance the efficiency and stability of this model.

Modeling of Cell Motion in Micro-Scale Hydrodynamic-Electrical Field

2009 ◽  
Vol 74 ◽  
pp. 139-142
Author(s):  
Ting Ye ◽  
Hua Li
Keyword(s):  
Stokes Equations ◽  
Elastic Shell ◽  
Practical Significance ◽  
Cell Manipulation ◽  
Navier Stokes ◽  
Phase System ◽  
Two Phase ◽  
Navier Stokes Equations ◽  
Maxwell Stress Tensor ◽  
Cell Motion

A modeling of two-phase system is presented for investigation of the cell motion and deformation in the microchannel subject to the mechanical and electrical coupled forces. In order to evaluate the mechanical force developed by cell membrane, it is treated as an incompressible and elastic shell with uniform thickness capable of shearing and bending deformation. Due to the irregular and complex cell configuration after deformation, the Maxwell stress tensor (MST) method is successfully employed to analyze the dielectrophoretic force. The modified particle binary level set (MPBLS) method is presented to accurately track the moving interface between the two phases, which is vital for a modeling of two-phase system. Afterwards the modified SIMPLER coupled with SIMPLEC is used to numerically solve the incompressible Navier-Stokes equations governing the entire flow field. On basis of the series of methods, the motion and deformation of red blood cell (RBC) in the microchannel under the mechanical and electrical forces are simulated to demonstrate the deformation process and the moving trajectory of RBC. The present study is not only of great value for deeper understanding of some diseases caused by cell abnormality, but also of practical significance for cell manipulation and separation.

scholarly journals Asymptotically based self-similarity solution of the Navier–Stokes equations for a porous tube with a non-circular cross-section

2017 ◽  
Vol 826 ◽  
pp. 396-420 ◽  
Author(s):  
M. Bouyges ◽  
F. Chedevergne ◽  
G. Casalis ◽  
J. Majdalani
Keyword(s):  
Cross Section ◽  
Similarity Solution ◽  
Stokes Equations ◽  
Circular Cross Section ◽  
Internal Flow ◽  
Navier Stokes ◽  
Solid Rocket Motor ◽  
Mean Flow ◽  
Navier Stokes Equations ◽  
Radial Deviation

This work introduces a similarity solution to the problem of a viscous, incompressible and rotational fluid in a right-cylindrical chamber with uniformly porous walls and a non-circular cross-section. The attendant idealization may be used to model the non-reactive internal flow field of a solid rocket motor with a star-shaped grain configuration. By mapping the radial domain to a circular pipe flow, the Navier–Stokes equations are converted to a fourth-order differential equation that is reminiscent of Berman’s classic expression. Then assuming a small radial deviation from a fixed chamber radius, asymptotic expansions of the three-component velocity and pressure fields are systematically pursued to the second order in the radial deviation amplitude. This enables us to derive a set of ordinary differential relations that can be readily solved for the mean flow variables. In the process of characterizing the ensuing flow motion, the axial, radial and tangential velocities are compared and shown to agree favourably with the simulation results of a finite-volume Navier–Stokes solver at different cross-flow Reynolds numbers, deviation amplitudes and circular wavenumbers.

Analytical and Semi-empirical Models of Tornadoes and Downbursts

2021 ◽  
Author(s):  
Djordje Romanic ◽  
Horia Hangan
Keyword(s):  
Numerical Simulations ◽  
Stokes Equations ◽  
Empirical Models ◽  
Navier Stokes ◽  
Mean Flow ◽  
Navier Stokes Equations ◽  
Boundary Layer Equations ◽  
Simplifying Assumptions ◽  
The Individual ◽  
Semi Empirical

Analytical and semi-empirical models are inexpensive to run and can complement experimental and numerical simulations for risk analysis-related applications. Some models are developed by employing simplifying assumptions in the Navier-Stokes equations and searching for exact, but many times inviscid solutions occasionally complemented by boundary layer equations to take surface effects into account. Other use simple superposition of generic, canonical flows for which the individual solutions are known. These solutions are then ensembled together by empirical or semi-empirical fitting procedures. Few models address turbulent or fluctuating flow fields, and all models have a series of constants that are fitted against experiments or numerical simulations. This chapter presents the main models used to provide primarily mean flow solutions for tornadoes and downbursts. The models are organized based on the adopted solution techniques, with an emphasis on their assumptions and validity.

Discussion on Clustering Effects in Vertical Gas-Particle Flows

2000 ◽  
Author(s):  
Eivind Helland ◽  
Rene Occelli ◽  
Lounes Tadrist
Keyword(s):  
Gas Phase ◽  
Stokes Equations ◽  
Lagrangian Approach ◽  
Inelastic Collisions ◽  
Navier Stokes ◽  
Coupling Term ◽  
Two Phase ◽  
Navier Stokes Equations ◽  
Drag Forces ◽  
Particle Flows

Abstract Simulations of 2D gas-particle flows in a vertical riser using a mixed Eulerian-Lagrangian approach are addressed. The model for the interstitial gas phase is based on the Navier-Stokes equations for two-phase flow with a coupling term between the gas and solid phases due to drag forces. The motion of particles is treated by a Lagrangian approach and the particles are assumed to interact through binary, instantaneous, non-frontal, inelastic collisions with friction. In this paper different particle clustering effects in the gas-particle flow is investigated.

Low-Frequency Fluctuations In The Flow Over Confined Cylinder In A Narrow Rectangular Duct At Re = 3 750

2017 ◽  
Vol 12 (1) ◽  
pp. 43-49
Author(s):  
Egor Palkin ◽  
Rustam Mullyadzhanov
Keyword(s):  
Stokes Equations ◽  
Low Frequency ◽  
Horseshoe Vortex ◽  
Navier Stokes ◽  
Infinite Cylinder ◽  
Rectangular Duct ◽  
Mean Flow ◽  
Navier Stokes Equations ◽  
Frequency Modulations ◽  
Bounding Surfaces

Flows between two closely spaced bounding surfaces are frequently appear in engineering applications and natural flows. In current paper the flow over a cylinder in a narrow rectangular duct was investigated by numerical computations of Navier-Stokes equations using Large eddy simulations (LES) at ReD = 3 750 based on cylinder diameter and the bulk velocity at inflow boundary. The influence of the bounding walls was demonstrated by comparing mean flow streamlines with the flow over an infinite cylinder at close Reynolds numbers. A comparison between the time-averaged velocity field in front and past the cylinder with experimental from the literature data showed good agreement although the characteristic horseshoe vortex structures are highly sensitive to Reynolds number and turbulence level at inflow boundary. Most energetic modes in recirculating region were revealed by spectral analysis. These low-frequency modulations were characterized by the pair of dominating vortices which are expected to have high influence on the heat transfer in near wake of the cylinder.

Sign in / Sign up

Export Citation Format

Share Document