Existence of a sharp transition in the peak propulsive efficiency of a low- pitching foil

2016 ◽  
Vol 800 ◽  
pp. 307-326 ◽  
Author(s):  
Anil Das ◽  
Ratnesh K. Shukla ◽  
Raghuraman N. Govardhan

We perform a comprehensive characterization of the propulsive performance of a thrust generating pitching foil over a wide range of Reynolds ($10\leqslant Re\leqslant 2000$) and Strouhal ($St$) numbers using a high-resolution viscous vortex particle method. For a given $Re$, we show that the mean thrust coefficient $\overline{C_{T}}$ increases monotonically with $St$, exhibiting a sharp rise as the location of the inception of the wake asymmetry shifts towards the trailing edge. As a result, the propulsive efficiency too rises steeply before attaining a maximum and eventually declining at an asymptotic rate that is consistent with the inertial scalings of $St^{2}$ for $\overline{C_{T}}$ and $St^{3}$ for the mean power coefficient, with the latter scaling holding, quite remarkably, over the entire range of $Re$. We find the existence of a sharp increase in the peak propulsive efficiency ${\it\eta}_{max}$ (at a given $Re$) in the $Re$ range of 50 to approximately 1000, with ${\it\eta}_{max}$ increasing rapidly from about 1.7 % to the saturated asymptotic value of approximately $16\,\%$. The $St$ at which ${\it\eta}_{max}$ is attained decreases progressively with $Re$ towards an asymptotic limit of $0.45$ and always exceeds the one for transition from a reverse von Kármán to a deflected wake. Moreover, the drag-to-thrust transition occurs at a Strouhal number $St_{tr}$ that exceeds the one for von Kármán to reverse von Kármán transition. The $St_{tr}$ and the corresponding power coefficient $\overline{C_{p,}}_{tr}$ are found to be remarkably consistent with the simple scaling relationships $St_{tr}\sim Re^{-0.37}$ and $\overline{C_{p,}}_{tr}\sim Re^{-1.12}$ that are derived from a balance of the thrust generated from the pitching motion and the drag force arising out of viscous resistance to the foil motion. The fact that the peak propulsive efficiency degrades appreciably only below $Re\approx 10^{3}$ establishes a sharp lower threshold for energetically efficient thrust generation from a pitching foil. Our findings should be generalizable to other thrust-producing flapping foil configurations and should aid in establishing the link between wake patterns and energetic cost of thrust production in similar systems.

2019 ◽  
Vol 862 ◽  
pp. 732-752 ◽  
Author(s):  
Evgeniy Boyko ◽  
Ran Eshel ◽  
Khaled Gommed ◽  
Amir D. Gat ◽  
Moran Bercovici

The interaction of a thin viscous film with an elastic sheet results in coupling of pressure and deformation, which can be utilized as an actuation mechanism for surface deformations in a wide range of applications, including microfluidics, optics and soft robotics. Implementation of such configurations inherently takes place over finite domains and often requires some pre-stretching of the sheet. Under the assumptions of strong pre-stretching and small deformations of the lubricated elastic sheet, we use the linearized Reynolds and Föppl–von Kármán equations to derive closed-form analytical solutions describing the deformation in a finite domain due to external forces, accounting for both bending and tension effects. We provide a closed-form solution for the case of a square-shaped actuation region and present the effect of pre-stretching on the dynamics of the deformation. We further present the dependence of the deformation magnitude and time scale on the spatial wavenumber, as well as the transition between stretching- and bending-dominant regimes. We also demonstrate the effect of spatial discretization of the forcing (representing practical actuation elements) on the achievable resolution of the deformation. Extending the problem to an axisymmetric domain, we investigate the effects arising from nonlinearity of the Reynolds and Föppl–von Kármán equations and present the deformation behaviour as it becomes comparable to the initial film thickness and dependent on the induced tension. These results set the theoretical foundation for implementation of microfluidic soft actuators based on elastohydrodynanmics.


2019 ◽  
Vol 11 (20) ◽  
pp. 5704
Author(s):  
Ning ◽  
Lee

This research aimed to examine the willingness to pay (WTP) of the young generation (the age group from 18 to 29) for the participatory solutions and actions on fine particulate matter (PM2.5) pollution control and abatement in Daegu, Korea, and Beijing, China. This study found out that Korean respondents and Chinese respondents shared a wide range of similarities, both in terms of socio-demographic characters like age, family size, and house/apartment ownership, as well as a number of perceptions related to environmental and social responsibilities. Around one-third of the Korean respondents and one-fifth of the Chinese respondents expressed negative WTP due to primary reasons such as lack of trust in the effectiveness of PM2.5 control measures (Korea) and limitation of budget (China). The mean estimated values of WTP with and without explanatory variables in Korea were merely slightly higher than those in China. The mean WTP without control variables in Korea was 11,882.97 KRW/month (10.61 USD/month) and the one in China was 65.09 CNY/month (9.48 USD/month). The mean WTP with explanatory variables for Daegu, Korea, was KRW 11,982.33 (USD 10.70) per person per month, and the one for Beijing, China, was CNY 64.84 (USD 9.40) per person per month. The annual total WTP for Daegu, Korea, was assessed around KRW 47572 million (USD 42.45 million), whereas the estimated total WTP for Beijing, China, was around CNY 3260.14 million (USD 474.94 million) per year. Based on the results and the findings, this study proposes to further strengthen the comprehensive cooperation between China and Korea in the field of air quality improvement, with a particular focus on PM2.5 control and abatement and cooperation in academic circles and among the general public.


2017 ◽  
Vol 34 (2) ◽  
pp. 193-207 ◽  
Author(s):  
C. L. Gong ◽  
Z. J. Yuan ◽  
Q. Zhou ◽  
G. Chen ◽  
Z. Fang

AbstractBiomimetic motions are helpful to underwater vehicles and new conception airplanes design. The lattice Boltzmann method with an immersed boundary method technique is used to reveal the propulsion and lift enhancement mechanism of biomimetic motions. The flow past a sphere and an ellipsoidal flapping wing were validated respectively by comparing with other numerical methods. Then a single flapping wing and three flapping wings in a tandem arrangement are accomplished respectively. It founds that the mean thrust coefficient of three plate wings is bigger than the one of the single plate wing. Three ellipsoidal wings and single ellipsoidal wing are compared. It shows that the single ellipsoidal wing has larger thrust coefficients than the three ellipsoidal wings. Ellipsoidal flapping wing and plate wing were further compared to investigate the influence of wing shape. It indicates the mean thrust coefficient of the ellipsoidal wing is bigger than the plate wing.


Author(s):  
Brian R. Elbing

Abstract The current study reexamines past studies of how drag-reducing polymer solutions modify the log-region of a developing turbulent boundary layer. The classical view was that the polymers modify the intercept constant without impacting the von Kármán coefficient, which results in the log-region being unaltered though shifted outward from the wall. However, recent work has shown this to be not accurate, especially at high drag reduction (>40%). While the deviations to the von Kármán coefficient were conjectured to be related to polymeric properties, this had not been explored. This work examines the scatter in both log-region parameters and estimates the local polymeric properties. This shows that the scatter of the von Kármán coefficient between studies is related to the inner variable based Weissenberg number. In addition, recent polymer ocean results are included that support the implicit assumption in past studies that the maximum wall concentration should be used to define the local polymeric properties.


2015 ◽  
Vol 27 (7) ◽  
pp. 1530-1548 ◽  
Author(s):  
Shinsuke Koyama

We propose a statistical method for modeling the non-Poisson variability of spike trains observed in a wide range of brain regions. Central to our approach is the assumption that the variance and the mean of interspike intervals are related by a power function characterized by two parameters: the scale factor and exponent. It is shown that this single assumption allows the variability of spike trains to have an arbitrary scale and various dependencies on the firing rate in the spike count statistics, as well as in the interval statistics, depending on the two parameters of the power function. We also propose a statistical model for spike trains that exhibits the variance-to-mean power relationship. Based on this, a maximum likelihood method is developed for inferring the parameters from rate-modulated spike trains. The proposed method is illustrated on simulated and experimental spike trains.


2009 ◽  
Vol 638 ◽  
pp. 73-93 ◽  
Author(s):  
J. KLEWICKI ◽  
P. FIFE ◽  
T. WEI

Elements of the first-principles-based theory of Wei et al. (J. Fluid Mech., vol. 522, 2005, p. 303), Fife et al. (Multiscale Model. Simul., vol. 4, 2005a, p. 936; J. Fluid Mech., vol. 532, 2005b, p. 165) and Fife, Klewicki & Wei (J. Discrete Continuous Dyn. Syst., vol. 24, 2009, p. 781) are clarified and their veracity tested relative to the properties of the logarithmic mean velocity profile. While the approach employed broadly reveals the mathematical structure admitted by the time averaged Navier–Stokes equations, results are primarily provided for fully developed pressure driven flow in a two-dimensional channel. The theory demonstrates that the appropriately simplified mean differential statement of Newton's second law formally admits a hierarchy of scaling layers, each having a distinct characteristic length. The theory also specifies that these characteristic lengths asymptotically scale with distance from the wall over a well-defined range of wall-normal positions, y. Numerical simulation data are shown to support these analytical findings in every measure explored. The mean velocity profile is shown to exhibit logarithmic dependence (exact or approximate) when the solution to the mean equation of motion exhibits (exact or approximate) self-similarity from layer to layer within the hierarchy. The condition of pure self-similarity corresponds to a constant leading coefficient in the logarithmic mean velocity equation. The theory predicts and clarifies why logarithmic behaviour is better approximated as the Reynolds number gets large. An exact equation for the leading coefficient (von Kármán coefficient κ) is tested against direct numerical simulation (DNS) data. Two methods for precisely estimating the leading coefficient over any selected range of y are presented. These methods reveal that the differences between the theory and simulation are essentially within the uncertainty level of the simulation. The von Kármán coefficient physically exists owing to an approximate self-similarity in the flux of turbulent force across an internal layer hierarchy. Mathematically, this self-similarity relates to the slope and curvature of the Reynolds stress profile, or equivalently the slope and curvature of the mean vorticity profile. The theory addresses how, why and under what conditions logarithmic dependence is approximated relative to the specific mechanisms contained within the mean statement of dynamics.


Soil Research ◽  
1971 ◽  
Vol 9 (2) ◽  
pp. 59 ◽  
Author(s):  
AJ Peck

The one-dimensional vertical redistribution of water is studied following infiltration into deep homogeneous soil with an initially uniform moisture content. There is assumed to be no loss of water by evaporation or transpiration during the redistribution. Assuming two factors to be constants, a first-order ordinary differential equation is derived which can be integrated numerically to compute the mean moisture content in the surface zone of draining soil as a function of the redistribution time. The depth of the draining zone increases with time, and this can be calculated too. That these factors are relatively constant is indicated by analysis of data for several soils and wetting depths over a wide range of redistribution times. Using mean values of the factors for several soils, and only wetting values of the diffusivity and conductivity functions, predicted redistribution behaviour agrees well with experimental data in four of six soils. In the remaining cases calculation of the factors for the particular soils, using an approximate method which includes hysteresis data, gives better results. The model is applied to predict the redistribution behaviour of different soils under identical treatments, and of a single soil for various infiltration quantities and initial moisture contents.


2011 ◽  
Vol 201-203 ◽  
pp. 1209-1212 ◽  
Author(s):  
Liang Yu Zhao ◽  
Xia Qing Zhang

A practical flapping wing micro aerial vehicle should have ability to withstand stochastic deviations of flight velocities. The responses of the time-averaged thrust coefficient and the propulsive efficiency with respect to a stochastic flight velocity deviation under Gauss distribution were numerically investigated using a classic Monte Carlo method. The response surface method was employed to surrogate the high fidelity model to save computational cost. It is observed that both of the time-averaged thrust coefficient and the propulsive efficiency obey a Gauss-like but not the exact Gauss distribution. The effect caused by the velocity deviation on the time-averaged thrust coefficient is larger than the one on the propulsive efficiency.


2010 ◽  
Vol 132 (4) ◽  
Author(s):  
Kideok Ro

This study was conducted in an attempt to improve the hydrodynamic performance of a Weis-Fogh type ship propulsion mechanism by installing a spring to the wing so that the opening angle of the wing can be changed automatically. With the prototype design, the average thrust coefficient was almost fixed with all velocity ratios; but with the spring type, the thrust coefficient was increased sharply as the velocity ratio increased. The average propulsive efficiency was higher with a bigger opening angle in the prototype but in the spring type design, the one with a smaller spring coefficient had higher efficiency. In the case of velocity ratios over 1.5 where big thrust can be generated, the spring type had more than twice the increase in propulsion efficiency compared with the prototype.


Author(s):  
Shahid Saghir ◽  
M.I. Younis

This article presents and compares different approaches to develop reduced-order models for the nonlinear von-Karman rectangular microplates actuated by nonlinear electrostatic forces. The reduced-order models aim to investigate the static and dynamic behavior of the plate under small and large actuation forces. A fully clamped microplate is considered. Different types of basis functions are used in conjunction with the Galerkin method to discretize the governing equations. First, we investigate the convergence with the number of modes retained in the model. Then for validation purpose, a comparison of the static results is made with the results calculated by a nonlinear finite element model. The linear eigenvalue problem for the plate under the electrostatic force is solved for a wide range of voltages up to pull-in. Results among the various reduced-order modes are compared and are also validated by comparing to results of the finite-element model. Further, the reduced-order models are employed to capture the forced dynamic response of the microplate under small and large vibration amplitudes. Comparison of the different approaches is made for this case.


Sign in / Sign up

Export Citation Format

Share Document