On the effects of vertical offset and core structure in streamwise-oriented vortex–wing interactions

2016 ◽  
Vol 799 ◽  
pp. 128-158 ◽  
Author(s):  
C. J. Barnes ◽  
M. R. Visbal ◽  
P. G. Huang
Keyword(s):  
Pressure Gradient ◽  
Flow Structure ◽  
Hydrodynamic Instability ◽  
Leading Edge ◽  
Streamwise Vortex ◽  
Adverse Pressure Gradient ◽  
Suction Side ◽  
Linear Stability Theory ◽  
Vertical Position ◽  
Pressure Gradients

This article explores the three-dimensional flow structure of a streamwise-oriented vortex incident on a finite aspect-ratio wing. The vertical positioning of the incident vortex relative to the wing is shown to have a significant impact on the unsteady flow structure. A direct impingement of the streamwise vortex produces a spiralling instability in the vortex just upstream of the leading edge, reminiscent of the helical instability modes of a Batchelor vortex. A small negative vertical offset develops a more pronounced instability while a positive vertical offset removes the instability altogether. These differences in vertical position are a consequence of the upstream influence of pressure gradients provided by the wing. Direct impingement or a negative vertical offset subject the vortex to an adverse pressure gradient that leads to a reduced axial velocity and diminished swirl conducive to hydrodynamic instability. Conversely, a positive vertical offset removes instability by placing the streamwise vortex in line with a favourable pressure gradient, thereby enhancing swirl and inhibiting the growth of unstable modes. In every case, the helical instability only occurs when the properties of the incident vortex fall within the instability threshold predicted by linear stability theory. The influence of pressure gradients associated with separation and stall downstream also have the potential to introduce suction-side instabilities for a positive vertical offset. The influence of the wing is more severe for larger vortices and diminishes with vortex size due to weaker interaction and increased viscous stability. Helical instability is not the only possible outcome in a direct impingement. Jet-like vortices and a higher swirl ratio in wake-like vortices can retain stability upon impact, resulting in the laminar vortex splitting over either side of the wing.

Measurements in adverse-pressure-gradient turbulent boundary layers with a step change in surface roughness

1975 ◽  
Vol 70 (3) ◽  
pp. 573-593 ◽  
Author(s):  
W. H. Schofield
Keyword(s):  
Surface Roughness ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Leading Edge ◽  
Adverse Pressure Gradient ◽  
Turbulent Boundary Layers ◽  
Step Change ◽  
Internal Layer ◽  
Mean Velocity ◽  
Law Of The Wall

The response of turbulent boundary layers to sudden changes in surface roughness under adverse-pressure-gradient conditions has been studied experimentally. The roughness used was in the ‘d’ type array of Perry, Schofield & Joubert (1969). Two cases of a rough-to-smooth change in surface roughness were considered in the same arbitrary adverse pressure gradient. The two cases differed in the distance of the surface discontinuity from the leading edge and gave two sets of flow conditions for the establishment and growth of the internal layer which develops downstream from a change in surface roughness. These conditions were in turn different from those in the zero-pressure-gradient experiments of Antonia & Luxton. The results suggest that the growth of the new internal layer depends solely on the new conditions at the wall and scales with the local roughness length of that wall. Mean velocity profiles in the region after the step change in roughness were accurately described by Coles’ law of the wall-law of the wake combination, which contrasts with the zero-pressure-gradient results of Antonia & Luxton. The skin-friction coefficient after the step change in roughness did not overshoot the equilibrium distribution but made a slow adjustment downstream of the step. Comparisons of mean profiles indicate that similar defect profile shapes are produced in layers with arbitrary adverse pressure gradients at positions where the values of Clauser's equilibrium parameter β (= δ*τ−10dp/dx) are similar, provided that the pressure-gradient history and local values of the pressure gradient are also similar.

Turbine Cascade Flow Control Using a “Wake Filling” Pulsed Plasma Actuator

2005 ◽  
Author(s):  
H. Perez-Blanco ◽  
Robert Van Dyken ◽  
Aaron Byerley ◽  
Tom McLaughlin
Keyword(s):  
Boundary Layer ◽  
Pressure Gradient ◽  
Laminar Boundary Layer ◽  
Separation Bubble ◽  
Adverse Pressure Gradient ◽  
Suction Side ◽  
Plasma Actuator ◽  
Pulsed Plasma ◽  
Power Cost ◽  
Hot Film

Separation bubbles in high-camber blades under part-load conditions have been addressed via continuous and pulsed jets, and also via plasma actuators. Numerous passive techniques have been employed as well. In this type of blades, the laminar boundary layer cannot overcome the adverse pressure gradient arising along the suction side, resulting on a separation bubble. When separation is abated, a common explanation is that kinetic energy added to the laminar boundary layer speeds up its transition to turbulent. In the present study, a plasma actuator installed in the trailing edge (i.e. “wake filling configuration”) of a cascade blade is used to excite the flow in pulsed and continuous ways. The pulsed excitation can be directed to the frequencies of the large coherent structures (LCS) of the flow, as obtained via a hot-film anemometer, or to much higher frequencies present in the suction-side boundary layer, as given in the literature. It is found that pulsed frequencies much higher than that of LCS reduce losses and improve turning angles further than frequencies close to those of LCS. With the plasma actuator 50% on time, good loss abatement is obtained. Larger “on time” values yield improvements, but with decreasing returns. Continuous high-frequency activation results in the largest loss reduction, at increased power cost. The effectiveness of high frequencies may be due to separation abatement via boundary layer excitation into transition, or may simply be due to the creation of a favorable pressure gradient that averts separation as the actuator ejects fluid downstream. Both possibilities are discussed in light of the experimental evidence.

Predicting Turbulent Boundary Layer Wall Pressure Fluctuations in Adverse Pressure Gradients

2005 ◽  
Author(s):  
Frank J. Aldrich
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Pressure Gradient ◽  
Pressure Fluctuations ◽  
Adverse Pressure Gradient ◽  
Wall Pressure ◽  
Prediction Tool ◽  
Pressure Gradients ◽  
Wall Pressure Fluctuations ◽  
The Difference

A physics-based approach is employed and a new prediction tool is developed to predict the wavevector-frequency spectrum of the turbulent boundary layer wall pressure fluctuations for subsonic airfoils under the influence of adverse pressure gradients. The prediction tool uses an explicit relationship developed by D. M. Chase, which is based on a fit to zero pressure gradient data. The tool takes into account the boundary layer edge velocity distribution and geometry of the airfoil, including the blade chord and thickness. Comparison to experimental adverse pressure gradient data shows a need for an update to the modeling constants of the Chase model. To optimize the correlation between the predicted turbulent boundary layer wall pressure spectrum and the experimental data, an optimization code (iSIGHT) is employed. This optimization module is used to minimize the absolute value of the difference (in dB) between the predicted values and those measured across the analysis frequency range. An optimized set of modeling constants is derived that provides reasonable agreement with the measurements.

The Effect of Real Turbine Roughness With Pressure Gradient on Heat Transfer

2003 ◽  
Author(s):  
Jeffrey P. Bons ◽  
Stephen T. McClain
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Pressure Gradient ◽  
Adverse Pressure Gradient ◽  
Combined Effects ◽  
Pressure Gradients ◽  
Smooth Wall ◽  
Reynolds Analogy ◽  
Integral Boundary ◽  
Favorable Pressure Gradient

Experimental measurements of heat transfer (St) are reported for low speed flow over scaled turbine roughness models at three different freestream pressure gradients: adverse, zero (nominally), and favorable. The roughness models were scaled from surface measurements taken on actual, in-service land-based turbine hardware and include samples of fuel deposits, TBC spallation, erosion, and pitting as well as a smooth control surface. All St measurements were made in a developing turbulent boundary layer at the same value of Reynolds number (Rex≅900,000). An integral boundary layer method used to estimate cf for the smooth wall cases allowed the calculation of the Reynolds analogy (2St/cf). Results indicate that for a smooth wall, Reynolds analogy varies appreciably with pressure gradient. Smooth surface heat transfer is considerably less sensitive to pressure gradients than skin friction. For the rough surfaces with adverse pressure gradient, St is less sensitive to roughness than with zero or favorable pressure gradient. Roughness-induced Stanton number increases at zero pressure gradient range from 16–44% (depending on roughness type), while increases with adverse pressure gradient are 7% less on average for the same roughness type. Hot-wire measurements show a corresponding drop in roughness-induced momentum deficit and streamwise turbulent kinetic energy generation in the adverse pressure gradient boundary layer compared with the other pressure gradient conditions. The combined effects of roughness and pressure gradient are different than their individual effects added together. Specifically, for adverse pressure gradient the combined effect on heat transfer is 9% less than that estimated by adding their separate effects. For favorable pressure gradient, the additive estimate is 6% lower than the result with combined effects. Identical measurements on a “simulated” roughness surface composed of cones in an ordered array show a behavior unlike that of the scaled “real” roughness models. St calculations made using a discrete-element roughness model show promising agreement with the experimental data. Predictions and data combine to underline the importance of accounting for pressure gradient and surface roughness effects simultaneously rather than independently for accurate performance calculations in turbines.

scholarly journals An Inverse Design Method for Airfoils Based on Pressure Gradient Distribution

Energies ◽  
2020 ◽  
Vol 13 (13) ◽  
pp. 3400
Author(s):  
Yufei Zhang ◽  
Chongyang Yan ◽  
Haixin Chen
Keyword(s):  
Pressure Gradient ◽  
Design Method ◽  
Lift Coefficient ◽  
Pressure Coefficient ◽  
Poor Performance ◽  
Adverse Pressure Gradient ◽  
Inverse Design ◽  
Pressure Gradients ◽  
Gradient Distribution ◽  
Inverse Design Method

An airfoil inverse design method is proposed by using the pressure gradient distribution as the design target. The adjoint method is used to compute the derivatives of the design target. A combination of the weighted drag coefficient and the target dimensionless pressure gradient is applied as the optimization objective, while the lift coefficient is considered as a constraint. The advantage of this method is that the designer can sketch a rough expectation of the pressure distribution pattern rather than a precise pressure coefficient under a certain lift coefficient and Mach number, which can greatly reduce the design iteration in the initial stage of the design process. Multiple solutions can be obtained under different objective weights. The feasibility of the method is validated by a supercritical airfoil and a supercritical natural laminar flow airfoil, which are designed based on the target pressure gradients on the airfoils. Eight supercritical airfoils are designed under different upper surface pressure gradients. The drag creep and drag divergence characteristics of the airfoils are numerically tested. The shockfree airfoil demonstrates poor performance because of a high suction peak and the double-shock phenomenon. The adverse pressure gradient on the upper surface before the shockwave needs to be less than 0.2 to maintain both good drag creep and drag divergence characteristics.

Numerical Performance of Transition Models in Different Turbomachinery Flow Conditions: A Comparative Study

2000 ◽  
Author(s):  
Jiasen Hu ◽  
Torsten H. Fransson
Keyword(s):  
Reynolds Number ◽  
Pressure Gradient ◽  
Numerical Study ◽  
Adverse Pressure Gradient ◽  
Navier Stokes ◽  
Test Cases ◽  
Pressure Gradients ◽  
Flow Conditions ◽  
Transition Models ◽  
High Reynolds

A numerical study has been performed to compare the overall performance of three transition models when used with an industrial Navier-Stokes solver. The three models investigated include two experimental correlations and an integrated eN method. Twelve test cases in realistic turbomachinery flow conditions have been calculated. The study reveals that all the three models can work numerically well with an industrial Navier-Stokes code, but the prediction accuracy of the models depends on flow conditions. In general, all the three models perform comparably well to predict the transition in weak or moderate adverse pressure-gradient regions. The two correlations have the merit if the transition starts in strong favorable pressure-gradient region under high Reynolds number condition. But only the eN method works well to predict the transition controlled by strong adverse pressure gradients. The three models also demonstrate different capabilities to model the effects of turbulence intensity and Reynolds number.

Large-Eddy Simulation of Film Cooling in an Adverse Pressure Gradient Flow

2013 ◽  
Vol 135 (3) ◽  
Author(s):  
Martin Konopka ◽  
Wilhelm Jessen ◽  
Matthias Meinke ◽  
Wolfgang Schröder
Keyword(s):  
Pressure Gradient ◽  
Film Cooling ◽  
Gradient Flow ◽  
Adverse Pressure Gradient ◽  
Streamwise Velocity ◽  
Co2 Injection ◽  
Pressure Gradients ◽  
Cooling Effectiveness ◽  
Turbulent Schmidt Number ◽  
Large Eddy

In order to analyze the interaction of multiple rows of film cooling holes in flows at adverse pressure gradients, large-eddy simulations (LESs) are performed. The considered three-row cooling configuration consists of inclined cooling holes at an angle of 30 deg with a lateral pitch of p/D=3 and a streamwise spacing of l/D=6. The cooling holes possess a fan-shaped exit geometry with lateral and streamwise expansions. For each cooling row the complete internal flow is computed. Air and CO2 are injected in order to investigate the influence of an increased density ratio on the film cooling physics at adverse pressure gradients. The CO2 injected at the same blowing rate as air shows a higher magnitude of the Reynolds shear stress component and, thus, an enhanced mixing downstream of the cooling holes. The LES results of the air and CO2 configurations are compared to the corresponding particle-image velocimetry (PIV) measurements and show a convincing agreement in terms of the averaged streamwise velocity and streamwise velocity fluctuations. Furthermore, the cooling effectiveness is investigated for a zero and an adverse pressure gradient configuration with a temperature ratio at gas turbine conditions. For the adverse pressure gradient case, reduced temperature levels off the wall are observed. However, the cooling effectiveness shows only minor differences compared to the zero pressure gradient flow. The turbulent Schmidt number at CO2 injection shows large variations. Just downstream of the injection it attains low values, whereas high values are detected in the upper mixing zone of the cooling flow and the freestream at each film cooling row.

Scaling of Performance for Varying Density Ratio Coolants on an Airfoil With Strong Curvature and Pressure Gradient Effects

2000 ◽  
Author(s):  
Marcia I. Ethridge ◽  
J. Michael Cutbirth ◽  
David G. Bogard
Keyword(s):  
Pressure Gradient ◽  
Film Cooling ◽  
Density Ratio ◽  
Flux Ratio ◽  
Leading Edge ◽  
Suction Side ◽  
Cooling Performance ◽  
Injection Angle ◽  
Adiabatic Effectiveness ◽  
Strong Curvature

An experimental study was conducted to investigate the film cooling performance on the suction side of a first stage turbine vane. Tests were conducted on a nine times scale vane model at density ratios of DR = 1.1 and 1.6 over a range of blowing conditions, 0.2 ≤ M ≤ 1.5 and 0.05 ≤ I ≤ 1.2. Two different mainstream turbulence intensity levels, Tu∞ = 0.5% and 20%, were also investigated. The row of coolant holes studied was located in a position of both strong curvature and strong favorable pressure gradient. In addition, its performance was isolated by blocking the leading edge showerhead coolant holes. Adiabatic effectiveness measurements were made using an infrared camera to map the surface temperature distribution. The results indicate that film cooling performance was greatly enhanced over holes with a similar 50° injection angle on a flat plate. Overall, adiabatic effectiveness scaled with mass flux ratio for low blowing conditions and with momentum flux ratio for high blowing conditions. However, for M < 0.5 there was a higher rate of decay for the low density ratio data. High mainstream turbulence had little effect at low blowing ratios, but degraded performance at higher blowing ratios.

scholarly journals Effect of Pressure Gradient on the Development of Görtler Vortices

2019 ◽  
Author(s):  
Leandro Marochio Fernandes ◽  
Marcio Teixeira de Mendonça
Keyword(s):  
Pressure Gradient ◽  
Linear Stability ◽  
Boundary Layers ◽  
Adverse Pressure Gradient ◽  
Base Flow ◽  
Linear Stability Theory ◽  
Wave Number ◽  
Local Mode ◽  
Effect Of Pressure ◽  
Centrifugal Instability

Boundary layers over concave surfaces may become unstable due to centrifugal instability that manifests itself as stationary streamwise counter rotating vortices. The centrifugal instability mechanism in boundary layers has been extensively studied and there is a large number of publications addressing different aspects of this problem. The results on the effect of pressure gradient show that favorable pressure gradients are stabilizing and adverse pressure gradient enhances the instability. The objective of the present investigation is to complement those works, looking particularly at the effect of pressure gradient on the stability diagram and on the determination of the spanwise wave number corresponding to the fastest growth. This study is based on the classic linear stability theory, where the parallel boundary layer approximation is assumed. Therefore, results are valid for Görtler numbers above 7, the lower limit where local mode linear stability analysis was identified in the literature as valid. For the base flow given by the Falkner-Skan solution, the linear stability equations are solved by a shooting method where the eigenvalues are the Görtler number, the spanwise wavenumber and the growth rate. The results show stabilization due to favorable pressure gradient as the constant amplification rate curves are displaced to higher Görtler numbers, with the opposite effect for adverse pressure gradient. Results previously unavailable in the literature identifying the fastest growing mode spanwise wavelength for a range of Falkner-Skan acceleration parameters are presented.

Sign in / Sign up

Export Citation Format

Share Document