A theoretical decomposition of mean skin friction generation into physical phenomena across the boundary layer

2016 ◽  
Vol 790 ◽  
pp. 339-367 ◽  
Author(s):  
Nicolas Renard ◽  
Sébastien Deck
Keyword(s):  
Boundary Layer ◽  
Skin Friction ◽  
Reynolds Shear Stress ◽  
Reynolds Numbers ◽  
Skin Friction Coefficient ◽  
Momentum Budget ◽  
The Mean ◽  
Logarithmic Layer ◽  
High Reynolds ◽  
Physical Phenomena

A theoretical decomposition of mean skin friction generation into physical phenomena across the whole profile of the incompressible zero-pressure-gradient smooth-flat-plate boundary layer is derived from a mean streamwise kinetic-energy budget in an absolute reference frame (in which the undisturbed fluid is not moving). The Reynolds-number dependences in the laminar and turbulent cases are investigated from direct numerical simulation datasets and Reynolds-averaged Navier–Stokes simulations, and the asymptotic trends are consistently predicted by theory. The generation of the difference between the mean friction in the turbulent and laminar cases is identified with the total production of turbulent kinetic energy (TKE) in the boundary layer, represented by the second term of the proposed decomposition of the mean skin friction coefficient. In contrast, the analysis introduced by Fukagataet al.(Phys. Fluids, vol. 14 (11), 2002, pp. 73–76), based on a streamwise momentum budget in the wall reference frame, relates the turbulence-induced excess friction to the Reynolds shear stress weighted by a linear function of the wall distance. The wall-normal distribution of the linearly-weighted Reynolds shear stress differs from the distribution of TKE production involved in the present discussion, which consequently draws different conclusions on the contribution of each layer to the mean skin friction coefficient. At low Reynolds numbers, the importance of the buffer-layer dynamics is confirmed. At high Reynolds numbers, the present decomposition quantitatively shows for the first time that the generation of the turbulence-induced excess friction is dominated by the logarithmic layer. This is caused by the well-known decay of the relative contributions of the buffer layer and wake region to TKE production with increasing Reynolds numbers. This result on mean skin friction, with a physical interpretation relying on an energy budget, is consistent with the well-established general importance of the logarithmic layer at high Reynolds numbers, contrary to the friction breakdown obtained from the approach of Fukagataet al.(Phys. Fluids, vol. 14 (11), 2002, pp. 73–76), essentially based on a momentum budget. The new decomposition suggests that it may be worth investigating new drag reduction strategies focusing on TKE production and on the nature of the logarithmic layer dynamics. The decomposition is finally extended to the pressure-gradient case and to channel and pipe flows.

The Effect of Biofilms on Turbulent Boundary Layers

1999 ◽  
Vol 121 (1) ◽  
pp. 44-51 ◽  
Author(s):  
M. P. Schultz ◽  
G. W. Swain
Keyword(s):  
Boundary Layer ◽  
Friction Coefficient ◽  
Turbulent Boundary Layer ◽  
Skin Friction ◽  
Layer Structure ◽  
Reynolds Shear Stress ◽  
Skin Friction Coefficient ◽  
Laser Doppler Velocimeter ◽  
Reynolds Stresses ◽  
The Mean

Materials exposed in the marine environment, including those protected by antifouling paints, may rapidly become colonized by microfouling. This may affect frictional resistance and turbulent boundary layer structure. This study compares the mean and turbulent boundary layer velocity characteristics of surfaces covered with a marine biofilm with those of a smooth surface. Measurements were made in a nominally zero pressure gradient, boundary layer flow with a two-component laser Doppler velocimeter at momentum thickness Reynolds numbers of 5600 to 19,000 in a recirculating water tunnel. Profiles of the mean and turbulence velocity components, including the Reynolds shear stress, were measured. An average increase in the skin friction coefficient of 33 to 187 percent was measured on the fouled specimens. The skin friction coefficient was found to be dependent on both biofilm thickness and morphology. The biofilms tested showed varying effect on the Reynolds stresses when those quantities were normalized with the friction velocity.

Air Blowing Into Boundary Layer Of A Flat Plate With Length-Dependent Permeability

2016 ◽  
Vol 11 (3) ◽  
pp. 16-26
Author(s):  
Vladimir Kornilov ◽  
Andrey Boiko ◽  
Ivan Kavun ◽  
Anatoliy Popkov
Keyword(s):  
Boundary Layer ◽  
Friction Coefficient ◽  
Flat Plate ◽  
Skin Friction ◽  
Mass Flow Rate ◽  
Mass Flow ◽  
Flow Rate ◽  
Skin Friction Coefficient ◽  
Air Blowing ◽  
The Mean

A generalized analysis of the results of numerical and experimental studies of air blowing into a turbulent boundary layer through finely perforated surface consisting of alternating permeable and impermeable sections of varying length providing a sudden change in the flow conditions at the boundaries of these sections is presented. The air blowing coefficient Cb determined by the mass flow rate per unit area of the active perforated sample varied in the range from 0 to 0.008. It is shown that as Cb grows, the maximum reduction in the mean surface skin-friction coefficient CF, which is the value through the permeable area of perforated sample, reaches about 65 %. When keeping the equal mass flow rate Q for all tested combinations, the mean skin-friction coefficient remains constant, independent of geometrical parameters of permeable and impermeable sections. Increasing the length of the last permeable section leads to the growth of relaxation region which is characterized by the reduced skin friction values on the impermeable part of the flat plate.

PIV Study of Shallow Open Channel Flow Over d- and k-Type Transverse Ribs

2007 ◽  
Vol 129 (8) ◽  
pp. 1058-1072 ◽  
Author(s):  
M. F. Tachie ◽  
K. K. Adane
Keyword(s):  
Boundary Layer ◽  
Friction Coefficient ◽  
Skin Friction ◽  
Cross Section ◽  
Open Channel ◽  
Skin Friction Coefficient ◽  
Mixing Length ◽  
Mean Flow ◽  
Turbulent Statistics ◽  
The Mean

A particle image velocimetry was used to study shallow open channel turbulent flow over d-type and k-type transverse ribs of square, circular, and semi-circular cross sections. The ratio of boundary layer thickness to depth of flow varied from 50% to 90%. The mean velocities and turbulent quantities were evaluated at the top plane of the ribs to characterize interaction between the cavities and overlying boundary layer. It was found that the overlying boundary layer interacts more strongly with k-type cavities than observed for d-type cavities. The profiles of the mean velocities and turbulent statistics were then spatially averaged over a pitch, and these profiles were used to study the effects of rib type and cross section on the flow field. The mean velocity gradients were found to be non-negligible across the boundary layer, and the implications of this observation for momentum transport, eddy viscosity, and mixing length distributions are discussed. The results show that the skin friction coefficient, Reynolds stresses and mixing length distributions are independent of rib cross section for d-type. For the k-type ribs, significant variations in skin friction coefficient values, mean flow, and turbulence fields are observed between square ribs and circular/semi-circular ribs.

Experimental Investigation of Turbulent Boundary Layers Under Favorable Pressure Gradient

2010 ◽  
Author(s):  
Pranav Joshi ◽  
Joseph Katz
Keyword(s):  
Boundary Layer ◽  
Friction Coefficient ◽  
Pressure Gradient ◽  
Skin Friction ◽  
Velocity Profiles ◽  
Skin Friction Coefficient ◽  
Mean Velocity ◽  
Freestream Velocity ◽  
Favorable Pressure Gradient ◽  
The Mean

The goal of this research is to study the effect of favorable pressure gradient (FPG) on the near wall structures of a turbulent boundary layer on a smooth wall. 2D-PIV measurements have been performed in a sink flow, initially at a coarse resolution, to characterize the development of the mean flow and (under resolved) Reynolds stresses. Lack of self-similarity of mean velocity profiles shows that the boundary layer does not attain the sink flow equilibrium. In the initial phase of acceleration, the acceleration parameter, K = v/U2dU/dx, increases from zero to 0.575×10−6, skin friction coefficient decreases and mean velocity profiles show a log region, but lack universality. Further downstream, K remains constant, skin friction coefficient increases and the mean velocity profiles show a second log region away from the wall. In the initial part of the FPG region, all the Reynolds stress components decrease over the entire boundary layer. In the latter phase, they continue to decrease in the middle of the boundary layer, and increase significantly close to the wall (below y∼0.15δ), where they collapse when normalized with the local freestream velocity. Turbulence production and wallnormal transport, scaled with outer units, show self-similar profiles close to the wall in the constant K region. Spanwise-streamwise plane data shows evidence of low speed streaks in the log layer, with widths scaling with the boundary layer thickness.

scholarly journals Simultaneous skin friction and velocity measurements in high Reynolds number pipe and boundary layer flows

2019 ◽  
Vol 871 ◽  
pp. 377-400 ◽  
Author(s):  
R. Baidya ◽  
W. J. Baars ◽  
S. Zimmerman ◽  
M. Samie ◽  
R. J. Hearst ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Skin Friction ◽  
Large Scale ◽  
Streamwise Velocity ◽  
Momentum Equation ◽  
The Self ◽  
Self Similarity ◽  
Self Similar ◽  
The Mean ◽  
High Reynolds

Streamwise velocity and wall-shear stress are acquired simultaneously with a hot-wire and an array of azimuthal/spanwise-spaced skin friction sensors in large-scale pipe and boundary layer flow facilities at high Reynolds numbers. These allow for a correlation analysis on a per-scale basis between the velocity and reference skin friction signals to reveal which velocity-based turbulent motions are stochastically coherent with turbulent skin friction. In the logarithmic region, the wall-attached structures in both the pipe and boundary layers show evidence of self-similarity, and the range of scales over which the self-similarity is observed decreases with an increasing azimuthal/spanwise offset between the velocity and the reference skin friction signals. The present empirical observations support the existence of a self-similar range of wall-attached turbulence, which in turn are used to extend the model of Baarset al.(J. Fluid Mech., vol. 823, p. R2) to include the azimuthal/spanwise trends. Furthermore, the region where the self-similarity is observed correspond with the wall height where the mean momentum equation formally admits a self-similar invariant form, and simultaneously where the mean and variance profiles of the streamwise velocity exhibit logarithmic dependence. The experimental observations suggest that the self-similar wall-attached structures follow an aspect ratio of$7:1:1$in the streamwise, spanwise and wall-normal directions, respectively.

Effect of Free-Stream Turbulence on Heat Transfer through a Turbulent Boundary Layer

1978 ◽  
Vol 100 (4) ◽  
pp. 671-677 ◽  
Author(s):  
J. C. Simonich ◽  
P. Bradshaw
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Reynolds Number ◽  
Free Stream ◽  
Reynolds Numbers ◽  
Skin Friction Coefficient ◽  
Reynolds Analogy ◽  
Low Reynolds Numbers ◽  
Free Stream Turbulence ◽  
High Reynolds

Measurements in a boundary layer in zero pressure gradient show that the effect of grid-generated free-stream turbulence is to increase heat transfer by about five percent for each one percent rms increase of the longitudinal intensity. In fact, even a Reynolds analogy factor, 2 × (Stanton number)/(skin-friction coefficient), increases significantly. It is suggested that the irreconcilable differences between previous measurements are attributable mainly to the low Reynolds numbers of most of those measurements. The present measurements attained a momentum-thickness Reynolds number of 6500 (chord Reynolds number approximately 6.3 × 106) and are thought to be typical of high-Reynolds-number flows.

Turbulent Boundary Layers on Surfaces Covered With Filamentous Algae

2000 ◽  
Vol 122 (2) ◽  
pp. 357-363 ◽  
Author(s):  
Michael P. Schultz
Keyword(s):  
Boundary Layer ◽  
Shear Stress ◽  
Turbulence Intensity ◽  
Reynolds Shear Stress ◽  
Skin Friction Coefficient ◽  
Laser Doppler Velocimeter ◽  
Mean Velocity ◽  
Rough Walls ◽  
The Mean ◽  
Stress Profiles

Turbulent boundary layer measurements have been made on surfaces covered with filamentous marine algae. These experiments were conducted in a closed return water tunnel using a two-component, laser Doppler velocimeter (LDV). The mean velocity profiles and parameters, as well as the axial and wall-normal turbulence intensities and Reynolds shear stress, are compared with flows over smooth and sandgrain rough walls. Significant increases in the skin friction coefficient for the algae-covered surfaces were measured. The boundary layer and integral thickness length scales were also increased. The results indicate that profiles of the turbulence quantities for the smooth and sandgrain rough walls collapse when friction velocity and boundary layer thickness are used as normalizing parameters. The algae-covered surfaces, however, exhibited a significant increase in the wall-normal turbulence intensity and the Reynolds shear stress, with only a modest increase in the axial turbulence intensity. The peak in the Reynolds shear stress profiles for the algae surfaces corresponded to the maximum extent of outward movement of the algae filaments. [S0098-2202(00)01902-7]

scholarly journals Analysis of the Contribution of Large Scale Motions to the Skin Friction of a Zero-Pressure-Gradient Turbulent Boundary Layer Using the Renard-Deck Decomposition

2021 ◽  
Vol 1 (1) ◽  
Author(s):  
Bihai Sun ◽  
Muhammad Shehzad ◽  
Daniel Jovic ◽  
Christophe Cuvier ◽  
Christian Willert ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Kinetic Energy ◽  
Turbulent Boundary Layer ◽  
Pressure Gradient ◽  
Skin Friction ◽  
Large Scale ◽  
Skin Friction Coefficient ◽  
Turbulent Shear ◽  
The Mean ◽  
Component Particle

Coherent flow structures in turbulent boundary layers have been an active field of research for many decades, as they might be the key to reveal the mechanics of turbulence production and transport in turbulent shear flows. Renard and Deck (2016) proposed a theoretical decomposition for the mean skin-friction coefficient based on the mean kinetic energy budget in the streamwise direction. This decomposition, referred to as the Renard-Deck (RD) decomposition, decomposes the mean skin friction generation into three physical mechanisms in an absolute reference frame, namely, direct viscous dissipation, turbulent kinetic energy production, and spatial growth. In this study, the large scale motions (LSMs) are extracted using a proper orthogonal decomposition (POD) of the velocity field based on high-spatial-resolution two-dimensional – two-component particle image velocimetry (HSR 2C-2D PIV) of a zero-pressure-gradient turbulent boundary layer (ZPG-TBL), and their effect on the skin friction via RD decomposition.

scholarly journals Aerodynamics of smooth and rough square-section prisms at incidence in very high Reynolds-number cross-flows

2021 ◽  
Vol 62 (3) ◽  
Author(s):  
Nils Paul van Hinsberg
Keyword(s):  
Reynolds Number ◽  
Cross Sections ◽  
Reynolds Numbers ◽  
Circular Cylinders ◽  
Surface Boundary ◽  
Experimental Proof ◽  
Surface Boundary Layer ◽  
Pitch Moment ◽  
The Mean ◽  
High Reynolds

Abstract The aerodynamics of smooth and slightly rough prisms with square cross-sections and sharp edges is investigated through wind tunnel experiments. Mean and fluctuating forces, the mean pitch moment, Strouhal numbers, the mean surface pressures and the mean wake profiles in the mid-span cross-section of the prism are recorded simultaneously for Reynolds numbers between 1$$\times$$ × 10$$^{5}$$ 5 $$\le$$ ≤ Re$$_{D}$$ D $$\le$$ ≤ 1$$\times$$ × 10$$^{7}$$ 7 . For the smooth prism with $$k_s$$ k s /D = 4$$\times$$ × 10$$^{-5}$$ - 5 , tests were performed at three angles of incidence, i.e. $$\alpha$$ α = 0$$^{\circ }$$ ∘ , −22.5$$^{\circ }$$ ∘ and −45$$^{\circ }$$ ∘ , whereas only both “symmetric” angles were studied for its slightly rough counterpart with $$k_s$$ k s /D = 1$$\times$$ × 10$$^{-3}$$ - 3 . First-time experimental proof is given that, within the accuracy of the data, no significant variation with Reynolds number occurs for all mean and fluctuating aerodynamic coefficients of smooth square prisms up to Reynolds numbers as high as $$\mathcal {O}$$ O (10$$^{7}$$ 7 ). This Reynolds-number independent behaviour applies to the Strouhal number and the wake profile as well. In contrast to what is known from square prisms with rounded edges and circular cylinders, an increase in surface roughness height by a factor 25 on the current sharp-edged square prism does not lead to any notable effects on the surface boundary layer and thus on the prism’s aerodynamics. For both prisms, distinct changes in the aerostatics between the various angles of incidence are seen to take place though. Graphic abstract

Effects of Reynolds Number and Free-Stream Turbulence on Boundary Layer Transition in a Compressor Cascade

2000 ◽  
Author(s):  
Heinz-Adolf Schreiber ◽  
Wolfgang Steinert ◽  
Bernhard Küsters
Keyword(s):  
Boundary Layer ◽  
Free Stream ◽  
Reynolds Numbers ◽  
Boundary Layer Transition ◽  
Bypass Transition ◽  
Layer Transition ◽  
Free Stream Turbulence ◽  
High Reynolds Numbers ◽  
High Turbulence ◽  
High Reynolds

An experimental and analytical study has been performed on the effect of Reynolds number and free-stream turbulence on boundary layer transition location on the suction surface of a controlled diffusion airfoil (CDA). The experiments were conducted in a rectilinear cascade facility at Reynolds numbers between 0.7 and 3.0×106 and turbulence intensities from about 0.7 to 4%. An oil streak technique and liquid crystal coatings were used to visualize the boundary layer state. For small turbulence levels and all Reynolds numbers tested the accelerated front portion of the blade is laminar and transition occurs within a laminar separation bubble shortly after the maximum velocity near 35–40% of chord. For high turbulence levels (Tu > 3%) and high Reynolds numbers transition propagates upstream into the accelerated front portion of the CDA blade. For those conditions, the sensitivity to surface roughness increases considerably and at Tu = 4% bypass transition is observed near 7–10% of chord. Experimental results are compared to theoretical predictions using the transition model which is implemented in the MISES code of Youngren and Drela. Overall the results indicate that early bypass transition at high turbulence levels must alter the profile velocity distribution for compressor blades that are designed and optimized for high Reynolds numbers.

Sign in / Sign up

Export Citation Format

Share Document