Stability of flow in a channel with longitudinal grooves

2014 ◽  
Vol 757 ◽  
pp. 613-648 ◽  
Author(s):  
H. V. Moradi ◽  
J. M. Floryan
Keyword(s):  
Reynolds Number ◽  
Small Amplitude ◽  
Arbitrary Shape ◽  
Critical Reynolds Number ◽  
Critical Role ◽  
Three Dimensional ◽  
Travelling Wave ◽  
Two Dimensional ◽  
Wave Instability ◽  
Long Wavelength

AbstractThe travelling wave instability in a channel with small-amplitude longitudinal grooves of arbitrary shape has been studied. The disturbance velocity field is always three-dimensional with disturbances which connect to the two-dimensional waves in the limit of zero groove amplitude playing the critical role. The presence of grooves destabilizes the flow if the groove wavenumber $\def \xmlpi #1{}\def \mathsfbi #1{\boldsymbol {\mathsf {#1}}}\let \le =\leqslant \let \leq =\leqslant \let \ge =\geqslant \let \geq =\geqslant \def \Pr {\mathit {Pr}}\def \Fr {\mathit {Fr}}\def \Rey {\mathit {Re}}\beta $ is larger than $\beta _{tran}\approx 4.22$, but stabilizes the flow for smaller $\beta $. It has been found that $\beta _{tran}$ does not depend on the groove amplitude. The dependence of the critical Reynolds number on the groove amplitude and wavenumber has been determined. Special attention has been paid to the drag-reducing long-wavelength grooves, including the optimal grooves. It has been demonstrated that such grooves slightly increase the critical Reynolds number, i.e. such grooves do not cause an early breakdown into turbulence.

Bifurcation Characteristics of Flows in Rectangular Sudden Expansion Channels

2005 ◽  
Author(s):  
Francine Battaglia ◽  
George Papadopoulos
Keyword(s):  
Reynolds Number ◽  
Laminar Flow ◽  
Critical Reynolds Number ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Expansion Ratio ◽  
Sudden Expansion ◽  
Two Dimensional ◽  
Effective Expansion ◽  
Three Dimensional Simulations

The effect of three-dimensionality on low Reynolds number flows past a symmetric sudden expansion in a channel was investigated. The geometric expansion ratio of in the current study was 2:1 and the aspect ratio was 6:1. Both experimental velocity measurements and two- and three-dimensional simulations for the flow along the centerplane of the rectangular duct are presented for Reynolds numbers in the range of 150 to 600. Comparison of the two-dimensional simulations with the experiments revealed that the simulations fail to capture completely the total expansion effect on the flow, which couples both geometric and hydrodynamic effects. To properly do so requires the definition of an effective expansion ratio, which is the ratio of the downstream and upstream hydraulic diameters and is therefore a function of both the expansion and aspect ratios. When the two-dimensional geometry was consistent with the effective expansion ratio, the new results agreed well with the three-dimensional simulations and the experiments. Furthermore, in the range of Reynolds numbers investigated, the laminar flow through the expansion underwent a symmetry-breaking bifurcation. The critical Reynolds number evaluated from the experiments and the simulations was compared to other values reported in the literature. Overall, side-wall proximity was found to enhance flow stability, helping to sustain laminar flow symmetry to higher Reynolds numbers in comparison to nominally two-dimensional double-expansion geometries. Lastly, and most importantly, when the logarithm of the critical Reynolds number from all these studies was plotted against the reciprocal of the effective expansion ratio, a linear trend emerged that uniquely captured the bifurcation dynamics of all symmetric double-sided planar expansions.

scholarly journals Linear stability of confined flow around a 180-degree sharp bend

2017 ◽  
Vol 822 ◽  
pp. 813-847 ◽  
Author(s):  
Azan M. Sapardi ◽  
Wisam K. Hussam ◽  
Alban Pothérat ◽  
Gregory J. Sheard
Keyword(s):  
Reynolds Number ◽  
Stability Analysis ◽  
Linear Stability ◽  
Linear Stability Analysis ◽  
Critical Reynolds Number ◽  
Three Dimensional ◽  
Base Flow ◽  
Two Dimensional ◽  
Two Dimensional Flow ◽  
The Stability

This study seeks to characterise the breakdown of the steady two-dimensional solution in the flow around a 180-degree sharp bend to infinitesimal three-dimensional disturbances using a linear stability analysis. The stability analysis predicts that three-dimensional transition is via a synchronous instability of the steady flows. A highly accurate global linear stability analysis of the flow was conducted with Reynolds number $\mathit{Re}<1150$ and bend opening ratio (ratio of bend width to inlet height) $0.2\leqslant \unicode[STIX]{x1D6FD}\leqslant 5$. This range of $\mathit{Re}$ and $\unicode[STIX]{x1D6FD}$ captures both steady-state two-dimensional flow solutions and the inception of unsteady two-dimensional flow. For $0.2\leqslant \unicode[STIX]{x1D6FD}\leqslant 1$, the two-dimensional base flow transitions from steady to unsteady at higher Reynolds number as $\unicode[STIX]{x1D6FD}$ increases. The stability analysis shows that at the onset of instability, the base flow becomes three-dimensionally unstable in two different modes, namely a spanwise oscillating mode for $\unicode[STIX]{x1D6FD}=0.2$ and a spanwise synchronous mode for $\unicode[STIX]{x1D6FD}\geqslant 0.3$. The critical Reynolds number and the spanwise wavelength of perturbations increase as $\unicode[STIX]{x1D6FD}$ increases. For $1<\unicode[STIX]{x1D6FD}\leqslant 2$ both the critical Reynolds number for onset of unsteadiness and the spanwise wavelength decrease as $\unicode[STIX]{x1D6FD}$ increases. Finally, for $2<\unicode[STIX]{x1D6FD}\leqslant 5$, the critical Reynolds number and spanwise wavelength remain almost constant. The linear stability analysis also shows that the base flow becomes unstable to different three-dimensional modes depending on the opening ratio. The modes are found to be localised near the reattachment point of the first recirculation bubble.

Hydromagnetic instability of a free shear layer at small magnetic Reynolds numbers

1971 ◽  
Vol 49 (1) ◽  
pp. 21-31 ◽  
Author(s):  
Kanefusa Gotoh
Keyword(s):  
Magnetic Field ◽  
Reynolds Number ◽  
Shear Layer ◽  
Critical Reynolds Number ◽  
Three Dimensional ◽  
Two Dimensional ◽  
Free Shear Layer ◽  
Electrically Conducting ◽  
The Stability ◽  
The Magnetic Field

The effect of a uniform and parallel magnetic field upon the stability of a free shear layer of an electrically conducting fluid is investigated. The equations of the velocity and the magnetic disturbances are solved numerically and it is shown that the flow is stabilized with increasing magnetic field. When the magnetic field is expressed in terms of the parameter N (= M2/R2), where M is the Hartmann number and R is the Reynolds number, the lowest critical Reynolds number is caused by the two-dimensional disturbances. So long as 0 [les ] N [les ] 0·0092 the flow is unstable at all R. For 0·0092 < N [les ] 0·0233 the flow is unstable at 0 < R < Ruc where Ruc decreases as N increases. For 0·0233 < N < 0·0295 the flow is unstable at Rlc < R < Ruc where Rlc increases with N. Lastly for N > 0·0295 the flow is stable at all R. When the magnetic field is measured by M, the lowest critical Reynolds number is still due to the two-dimensional disturbances provided 0 [les ] M [les ] 0·52, and Rc is given by the corresponding Rlc. For M > 0·52, Rc is expressed as Rc = 5·8M, and the responsible disturbance is the three-dimensional one which propagates at angle cos−1(0·52/M) to the direction of the basic flow.

Analysis of Fluid Flow in Porous Media Using the Lattice Boltzmann Method: Inertial Flow Regime

2012 ◽  
Author(s):  
Huizhe Zhao ◽  
Aydin Nabovati ◽  
Cristina H. Amon
Keyword(s):  
Reynolds Number ◽  
Lattice Boltzmann Method ◽  
Lattice Boltzmann ◽  
Critical Reynolds Number ◽  
Three Dimensional ◽  
Two Dimensional ◽  
Inertial Effects ◽  
Inertial Flow ◽  
Boltzmann Method ◽  
Three Dimensional Simulations

In this work, we use the lattice Boltzmann method to study inertial flow in three-dimensional random fibrous porous materials. In order to validate the methodology, inertial flow in two-dimensional hexagonal arrangements of circular cylinders is simulated, and the results are compared against those previously reported in the literature. The three-dimensional fibrous porous materials are then constructed by randomly placing straight cylindrical fibers inside the computational domain. Inertial effects are studied systematically for a wide range of pore Reynolds numbers in materials with porosities between 0.60 and 0.95. A previously proposed semi-empirical relation is modified to represent the inertial effects in three-dimensional fibrous materials. Three distinct regimes of constant, quadratic, and linear relations between the inverse of the permeability and pore Reynolds number are observed for both two- and three-dimensional simulations. The critical Reynolds number, beyond which the inertial effects are strong and this relation is linear, is shown to be smaller in three-dimensional simulations, when compared to the critical Reynolds number in two-dimensional simulations.

scholarly journals Three-dimensional Floquet stability analysis of the wake of a circular cylinder

1996 ◽  
Vol 322 ◽  
pp. 215-241 ◽  
Author(s):  
Dwight Barkley ◽  
Ronald D. Henderson
Keyword(s):  
Reynolds Number ◽  
Stability Analysis ◽  
Circular Cylinder ◽  
Critical Reynolds Number ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Neutral Stability ◽  
Two Dimensional ◽  
Numerical Stability Analysis ◽  
Mode A

Results are reported from a highly accurate, global numerical stability analysis of the periodic wake of a circular cylinder for Reynolds numbers between 140 and 300. The analysis shows that the two-dimensional wake becomes (absolutely) linearly unstable to three-dimensional perturbations at a critical Reynolds number of 188.5±1.0. The critical spanwise wavelength is 3.96 ± 0.02 diameters and the critical Floquet mode corresponds to a ‘Mode A’ instability. At Reynolds number 259 the two-dimensional wake becomes linearly unstable to a second branch of modes with wavelength 0.822 diameters at onset. Stability spectra and corresponding neutral stability curves are presented for Reynolds numbers up to 300.

On the stability of plane Poiseuille flow with a finite conductivity in an aligned magnetic field

1968 ◽  
Vol 33 (3) ◽  
pp. 433-443 ◽  
Author(s):  
Sung-Hwan Ko
Keyword(s):  
Magnetic Field ◽  
Differential Equation ◽  
Reynolds Number ◽  
Critical Reynolds Number ◽  
Order Differential Equation ◽  
Three Dimensional ◽  
Sixth Order ◽  
Finite Conductivity ◽  
Two Dimensional ◽  
The Stability

A study is made of the stability of a viscous, incompressible fluid with a finite conductivity flowing between parallel planes in a parallel magnetic field. The general form of the magnetohydrodynamic stability equation is a sixth-order differential equation. The complete sixth-order differential equation is solved numerically as an eigenvalue problem. Stability curves are obtained for a range of values of the magnetic Reynolds number Rm and the Alfvé n number A based on two-dimensional disturbances. It is found that the minimum critical Reynolds number is raised as Rm increases for a given A2 and as A2 increases for a given Rm, respectively. The stability curve closes and finally degenerates to a point which gives the critical value for Rm or A2. Results obtained for two-dimensional disturbances are modified to take into account three-dimensional disturbances. Then the minimum critical Reynolds number where three-dimensional disturbances become apparent is obtained, below which two-dimensional disturbances are the most unstable.

Instabilities of plane Poiseuille flow with a streamwise system rotation

2008 ◽  
Vol 603 ◽  
pp. 189-206 ◽  
Author(s):  
S. MASUDA ◽  
S. FUKUDA ◽  
M. NAGATA
Keyword(s):  
Reynolds Number ◽  
Secondary Flow ◽  
Poiseuille Flow ◽  
Critical Reynolds Number ◽  
Three Dimensional ◽  
Two Dimensional ◽  
Plane Poiseuille Flow ◽  
Mean Flow ◽  
System Rotation ◽  
Spiral Vortex

We analyse the stability of plane Poiseuille flow with a streamwise system rotation. It is found that the instability due to two-dimensional perturbations, which sets in at the well-known critical Reynolds number, Rc = 5772.2, for the non-rotating case, is delayed as the rotation is increased from zero, showing a stabilizing effect of rotation. As the rotation is increased further, however, the laminar flow becomes most unstable to perturbations which are three-dimensional. The critical Reynolds number due to three-dimensional perturbations at this higher rotation case is many orders of magnitude less than the corresponding value due to two-dimensional perturbations. We also perform a nonlinear analysis on a bifurcating three-dimensional secondary flow. The secondary flow exhibits a spiral vortex structure propagating in the streamwise direction. It is confirmed that an antisymmetric mean flow in the spanwise direction is generated in the secondary flow.

Bifurcation Characteristics of Flows in Rectangular Sudden Expansion Channels

2005 ◽  
Vol 128 (4) ◽  
pp. 671-679 ◽  
Author(s):  
Francine Battaglia ◽  
George Papadopoulos
Keyword(s):  
Reynolds Number ◽  
Laminar Flow ◽  
Critical Reynolds Number ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Expansion Ratio ◽  
Sudden Expansion ◽  
Two Dimensional ◽  
Effective Expansion ◽  
Three Dimensional Simulations

The effect of three dimensionality on low Reynolds number flows past a symmetric sudden expansion in a channel was investigated. The geometric expansion ratio in the current study was 2:1 and the aspect ratio was 6:1. Both experimental velocity measurements and two- and three-dimensional simulations for the flow along the centerplane of the rectangular duct are presented for Reynolds numbers in the range of 150 to 600. Comparison of the two-dimensional simulations with the experiments revealed that the simulations failed to capture completely the total expansion effect on the flow, which is influenced by both geometric and hydrodynamic effects. To properly do so requires the definition of an effective expansion ratio, which is the ratio of the downstream and upstream hydraulic diameters and is therefore a function of both the expansion and aspect ratios. When two-dimensional simulations were performed using the effective expansion ratio, the new results agreed well with the three-dimensional simulations and the experiments. Furthermore, in the range of Reynolds numbers investigated, the laminar flow through the expansion underwent a symmetry-breaking bifurcation. The critical Reynolds number evaluated from the experiments and the simulations were compared to other values reported in the literature. Overall, side-wall proximity was found to enhance flow stability, thus sustaining laminar flow symmetry to higher Reynolds numbers. Last, and most important, when the logarithm of the critical Reynolds number was plotted against the reciprocal of the effective expansion ratio, a linear trend emerged that uniquely captured the bifurcation dynamics of all symmetric double-sided planar expansions.

Effects of Heat Transfer During Peristaltic Transport in Nonuniform Channel With Permeable Walls

2016 ◽  
Vol 139 (1) ◽  
Author(s):  
Siddharth Shankar Bhatt ◽  
Amit Medhavi ◽  
R. S. Gupta ◽  
U. P. Singh
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Incompressible Fluid ◽  
Friction Force ◽  
Viscous Incompressible Fluid ◽  
Peristaltic Transport ◽  
Two Dimensional ◽  
Peristaltic Motion ◽  
Long Wavelength ◽  
Permeable Walls

In the present investigation, problem of heat transfer has been studied during peristaltic motion of a viscous incompressible fluid for two-dimensional nonuniform channel with permeable walls under long wavelength and low Reynolds number approximation. Expressions for pressure, friction force, and temperature are obtained. The effects of different parameters on pressure, friction force, and temperature have been discussed through graphs.

Flow dynamics and enhanced mixing in a converging–diverging channel

2016 ◽  
Vol 807 ◽  
pp. 167-204 ◽  
Author(s):  
S. W. Gepner ◽  
J. M. Floryan
Keyword(s):  
Three Dimensional ◽  
Travelling Wave ◽  
Flow Dynamics ◽  
Streamwise Vortices ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Wave Instability ◽  
Unsteady Separation ◽  
Flow Stabilization ◽  
Diverging Channel

An analysis of flows in converging–diverging channels has been carried out with the primary goal of identifying geometries which result in increased mixing. The model geometry consists of a channel whose walls are fitted with spanwise grooves of moderate amplitudes (up to 10 % of the mean channel opening) and of sinusoidal shape. The groove systems on each wall are shifted by half of a wavelength with respect to each other, resulting in the formation of a converging–diverging conduit. The analysis is carried out up to Reynolds numbers resulting in the formation of secondary states. The first part of the analysis is based on a two-dimensional model and demonstrates that increasing the corrugation wavelength results in the appearance of an unsteady separation whose onset correlates with the onset of the travelling wave instability. The second part of the analysis is based on a three-dimensional model and demonstrates that the flow dynamics is dominated by the centrifugal instability over a large range of geometric parameters, resulting in the formation of streamwise vortices. It is shown that the onset of the vortices may lead to the elimination of the unsteady separation. The critical Reynolds number for the vortex onset initially decreases as the corrugation amplitude increases but an excessive increase leads to the stream lift up, reduction of the centrifugal forces and flow stabilization. The flow dynamics under such conditions is again dominated by the travelling wave instability. Conditions leading to the formation of streamwise vortices without interference from the travelling wave instability have been identified. The structure and the mixing properties of the saturated states are discussed.

Sign in / Sign up

Export Citation Format

Share Document