Mach number effects on the global mixing modes induced by ramp injectors in supersonic flows

2014 ◽  
Vol 757 ◽  
pp. 403-431 ◽  
Author(s):  
Luca Massa
Keyword(s):  
Mach Number ◽  
Free Stream ◽  
Mixing Layer ◽  
Three Dimensional ◽  
Base Flow ◽  
Recirculation Region ◽  
Mean Flow ◽  
Mixing Rate ◽  
Flow Distortion ◽  
The Mean

AbstractModern injectors for supersonic combustors (hypermixers) augment the fuel–air mixing rate by energizing the perturbation in the mixing layer. From an instability point of view, the increased perturbation growth is linked to the increased complexity of the equilibrium base flow when compared to the axisymmetric mixing layer. Common added features are streamwise vortex streaks, oblique recompression shocks and Prandtl–Meyer expansions. One of the main effects of such distortions of the mean flow is to transform the instability responsible for the creation of fine scales from a local amplified mode to a global self-sustained fluctuation. The focus of the present research is on the flow distortion induced by flushed ramps for free-stream Mach numbers in the range 2.5–3.5. The principal mean flow features are the recirculation region due to the recompression of the flow after the ramp, the shear layer over the recirculation region and the vortex streaks propagating from the ramp corners. A global three-dimensional stability analysis and three-dimensional direct numerical simulations of small perturbations of the mean flow are performed. The growth and energy distribution of the dominant and subdominant fluctuations supported by the three-dimensional steady laminar base flow are computed. The main results are the growth rates of the self-sustained varicose and sinuous modes and their correlation to the variation in the free-stream Mach number. The complex three-dimensional wavemaker is investigated by evaluating the three-dimensional eigenfunctions of the direct and adjoint modes, and the effects of the axial vorticity generated by the ramp corners are discussed.

Aspects of Shear Layer Unsteadiness in a Three-Dimensional Supersonic Wake

2005 ◽  
Vol 127 (6) ◽  
pp. 1085-1094 ◽  
Author(s):  
Alan L. Kastengren ◽  
J. Craig Dutton
Keyword(s):  
Shear Layer ◽  
Stream Flow ◽  
Free Stream ◽  
Angle Of Attack ◽  
Three Dimensional ◽  
Base Flow ◽  
Recirculation Region ◽  
Side View ◽  
Near Wake ◽  
Supersonic Wake

The near wake of a blunt-base cylinder at 10° angle-of-attack to a Mach 2.46 free-stream flow is visualized at several locations to study unsteady aspects of its structure. In both side-view and end-view images, the shear layer flapping grows monotonically as the shear layer develops, similar to the trends seen in a corresponding axisymmetric supersonic base flow. The interface convolution, a measure of the tortuousness of the shear layer, peaks for side-view and end-view images during recompression. The high convolution for a septum of fluid seen in the middle of the wake indicates that the septum actively entrains fluid from the recirculation region, which helps to explain the low base pressure for this wake compared to that for a corresponding axisymmetric wake.

The pre-transitional Klebanoff modes and other boundary-layer disturbances induced by small-wavelength free-stream vorticity

2009 ◽  
Vol 638 ◽  
pp. 267-303 ◽  
Author(s):  
PIERRE RICCO
Keyword(s):  
Boundary Layer ◽  
Layer Thickness ◽  
Boundary Layer Thickness ◽  
Free Stream ◽  
Streamwise Velocity ◽  
Matched Asymptotic Expansion ◽  
Two Dimensional ◽  
Mean Flow ◽  
Flow Distortion ◽  
The Mean

The response of the Blasius boundary layer to free-stream vortical disturbances of the convected gust type is studied. The vorticity signature of the boundary layer is computed through the boundary-region equations, which are the rigorous asymptotic limit of the Navier–Stokes equations for low-frequency disturbances. The method of matched asymptotic expansion is employed to obtain the initial and outer boundary conditions. For the case of forcing by a two-dimensional gust, the effect of a wall-normal wavelength comparable with the boundary-layer thickness is taken into account. The gust viscous dissipation and upward displacement due to the mean boundary layer produce significant changes on the fluctuations within the viscous region. The same analysis also proves useful for computing to second-order accuracy the boundary-layer response induced by a three-dimensional gust with spanwise wavelength comparable with the boundary-layer thickness. It also follows that the boundary-layer fluctuations of the streamwise velocity match the corresponding free-stream velocity component. The velocity profiles are compared with experimental data, and good agreement is attained.The generation of Tollmien–Schlichting waves by the nonlinear mixing between the two-dimensional unsteady vorticity fluctuations and the mean flow distortion induced by localized wall roughness and suction is also investigated. Gusts with small wall-normal wavelengths generate significantly different amplitudes of the instability waves for a selected range of forcing frequencies. This is primarily due to the disparity between the streamwise velocity fluctuations in the free stream and within the boundary layer.

Influence of optimally amplified streamwise streaks on the Kelvin–Helmholtz instability

2018 ◽  
Vol 838 ◽  
pp. 478-500 ◽  
Author(s):  
Mathieu Marant ◽  
Carlo Cossu
Keyword(s):  
Initial Conditions ◽  
Mixing Layer ◽  
Three Dimensional ◽  
Basic Flow ◽  
Sensitivity Analyses ◽  
Mean Flow ◽  
Helmholtz Instability ◽  
Flow Distortion ◽  
Streamwise Streaks ◽  
The Stability

The optimal energy amplifications of streamwise-uniform and spanwise-periodic perturbations of the hyperbolic-tangent mixing layer are computed and found to be very large, with maximum amplifications increasing with the Reynolds number and with the spanwise wavelength of the perturbations. The optimal initial conditions are streamwise vortices and the most amplified structures are streamwise streaks with sinuous symmetry in the cross-stream plane. The leading suboptimal perturbations have opposite (varicose) symmetry. When forced with finite amplitudes these perturbations modify the characteristics of the Kelvin–Helmholtz instability. Maximum temporal growth rates are reduced by optimal sinuous perturbations and are slightly increased by varicose suboptimal ones. In contrast, the onset of absolute instability is delayed by varicose suboptimal perturbations and is slightly promoted by sinuous optimal ones. We show that if, instead of the computed fully nonlinear basic-flow distortions, the stability analysis is based on a shape assumption for the flow distortions, then opposite effects on the flow stability are predicted in most of the considered cases. These strong differences are attributed to the spanwise-uniform component of the nonlinear basic-flow distortion which, we conclude, should be systematically included in sensitivity analyses of the stability of two-dimensional basic flows to three-dimensional basic-flow perturbations. We finally show that the leading-order quadratic sensitivity of the eigenvalues to the amplitude of the streaks is preserved if the effects of the mean flow distortion are included in the sensitivity analysis.

Generalized phase average with applications to sensor-based flow estimation of the wall-mounted square cylinder wake

2013 ◽  
Vol 736 ◽  
pp. 316-350 ◽  
Author(s):  
J. A. Bourgeois ◽  
B. R. Noack ◽  
R. J. Martinuzzi
Keyword(s):  
Oscillation Amplitude ◽  
Three Dimensional ◽  
Velocity Fields ◽  
Base Flow ◽  
Frame Rate ◽  
Cylinder Wake ◽  
Square Cylinder ◽  
Mean Flow ◽  
Phase Average ◽  
The Mean

AbstractWe experimentally investigate the three-dimensional wake behind a finite wall-mounted square cylinder at $\mathit{Re}= 12\hspace{0.167em} 000$ and aspect ratio of 4. Focus is placed on the base flow and oscillatory fluctuation. Time-resolved three-dimensional velocity fields are constructed from high-frame-rate particle image velocimetry (PIV) and simultaneously recorded surface pressure measurements. All three velocity components are resolved in a rectangular near-wake region by two orthogonal dense arrays of parallel PIV planes. A key enabler is a generalized phase average incorporating a slowly varying base flow, a variable oscillation amplitude and higher harmonics. These generalizations reduce the instantaneous residual 30 % below those of a traditional phase average. Moreover, the resolved variations reveal analytical constraints of the mean flow and oscillation levels, such as the mean-field paraboloid. The proposed methodology for generalized phase averaging and for construction of three-dimensional velocity fields from two-dimensional PIV data is applicable to a large class of turbulent flows with oscillatory dynamics.

scholarly journals Secondary crossflow instability through global analysis of measured base flows

2018 ◽  
Vol 846 ◽  
pp. 605-653 ◽  
Author(s):  
Koen J. Groot ◽  
Jacopo Serpieri ◽  
Fabio Pinna ◽  
Marios Kotsonis
Keyword(s):  
Three Dimensional ◽  
Base Flow ◽  
Type I ◽  
Type Ii ◽  
Ensemble Size ◽  
Mean Flow ◽  
Swept Wing ◽  
Measurement Domain ◽  
The Mean ◽  
Base Flows

A combined experimental and numerical approach to the analysis of the secondary stability of realistic swept-wing boundary layers is presented. Global linear stability theory is applied to experimentally measured base flows. These base flows are three-dimensional laminar boundary layers subject to spanwise distortion due to the presence of primary stationary crossflow vortices. A full three-dimensional description of these flows is accessed through the use of tomographic particle image velocimetry (PIV). The stability analysis solves for the secondary high-frequency modes of type I and type II, ultimately responsible for turbulent breakdown. Several pertinent parameters arising from the application of the proposed methodology are investigated, including the mean flow ensemble size and the measurement domain extent. Extensive use is made of the decomposition of the eigensolutions into the terms of the Reynolds–Orr equation, allowing insight into the production and/or destruction of perturbations from various base flow features. Stability results demonstrate satisfactory convergence with respect to the mean flow ensemble size and are independent of the handling of the exterior of the measurement domain. The Reynolds–Orr analysis reveals a close relationship between the type I and type II instability modes with spanwise and wall-normal gradients of the base flow, respectively. The structural role of the in-plane velocity components in the perturbation growth, topology and sensitivity is identified. Using the developed framework, further insight is gained into the linear growth mechanisms and later stages of transition via the primary and secondary crossflow instabilities. Furthermore, the proposed methodology enables the extension and enhancement of the experimental measurement data to the pertinent instability eigenmodes. The present work is the first demonstration of the use of a measured base flow for stability analysis applied to the swept-wing boundary layer, directly avoiding the modelling of the primary vortices receptivity processes.

On the Combined Effect of Mean Flow and Acoustic Excitation on Structural Response and Radiation

1997 ◽  
Vol 119 (3) ◽  
pp. 448-456 ◽  
Author(s):  
A. Frendi ◽  
L. Maestrello
Keyword(s):  
Mach Number ◽  
Response Spectrum ◽  
Structural Response ◽  
Harmonic Excitation ◽  
Two Dimensions ◽  
Physical Problem ◽  
Acoustic Excitation ◽  
Mean Flow ◽  
Power Spectral ◽  
The Mean

Numerical experiments in two dimensions are carried out in order to investigate the response of a typical aircraft structure to a mean flow and an acoustic excitation. Two physical problems are considered; one in which the acoustic excitation is applied on one side of the flexible structure and the mean flow is on the other side while in the second problem both the mean flow and acoustic excitation are on the same side. Subsonic and supersonic mean flows are considered together with a random and harmonic acoustic excitation. In the first physical problem and using a random acoustic excitation, the results show that at low excitation levels the response is unaffected by the mean flow Mach number. However, at high excitation levels the structural response is significantly reduced by increasing the Mach number. In particular, both the shift in the frequency response spectrum and the broadening of the peaks are reduced. In the second physical problem, the results show that the response spectrum is dominated by the lower modes (1 and 3) for the subsonic mean flow case and by the higher modes (5 and 7) in the supersonic case. When a harmonic excitation is used, it is found that in the subsonic case the power spectral density of the structural response shows a subharmonic (f/4) while in the supersonic case no subharmonic is obtained.

scholarly journals Inviscid spatial stability of a compressible mixing layer. Part 3. Effect of thermodynamics

1991 ◽  
Vol 224 ◽  
pp. 159-175 ◽  
Author(s):  
T. L. Jackson ◽  
C. E. Grosch
Keyword(s):  
Prandtl Number ◽  
Mixing Layer ◽  
Mean Flow ◽  
Temperature Relation ◽  
Compressible Mixing Layer ◽  
Spatial Stability ◽  
Mean Temperature ◽  
The Mean ◽  
The Difference ◽  
The Stability

We report the results of a comprehensive comparative study of the inviscid spatial stability of a parallel compressible mixing layer using various models for the mean flow. The models are (i) the hyperbolic tangent profile for the mean speed and the Crocco relation for the mean temperature, with the Chapman viscosity–temperature relation and a Prandtl number of one; (ii) the Lock profile for the mean speed and the Crocco relation for the mean temperature, with the Chapman viscosity-temperature relation and a Prandtl number of one; and (iii) the similarity solution for the coupled velocity and temperature equations using the Sutherland viscosity–temperature relation and arbitrary but constant Prandtl number. The purpose of this study was to determine the sensitivity of the stability characteristics of the compressible mixing layer to the assumed thermodynamic properties of the fluid. It is shown that the qualitative features of the stability characteristics are quite similar for all models but that there are quantitative differences resulting from the difference in the thermodynamic models. In particular, we show that the stability characteristics are sensitive to the value of the Prandtl number and to a particular value of the temperature ratio across the mixing layer.

Compressibility effects in a turbulent annular mixing layer. Part 1. Turbulence and growth rate

2000 ◽  
Vol 421 ◽  
pp. 229-267 ◽  
Author(s):  
JONATHAN B. FREUND ◽  
SANJIVA K. LELE ◽  
PARVIZ MOIN
Keyword(s):  
Growth Rate ◽  
Mach Number ◽  
Mixing Layer ◽  
Mixing Layers ◽  
Velocity Difference ◽  
Mean Velocity ◽  
The Mean ◽  
Mach Numbers ◽  
High Mach ◽  
Compressibility Effects

This work uses direct numerical simulations of time evolving annular mixing layers, which correspond to the early development of round jets, to study compressibility effects on turbulence in free shear flows. Nine cases were considered with convective Mach numbers ranging from Mc = 0.1 to 1.8 and turbulence Mach numbers reaching as high as Mt = 0.8.Growth rates of the simulated mixing layers are suppressed with increasing Mach number as observed experimentally. Also in accord with experiments, the mean velocity difference across the layer is found to be inadequate for scaling most turbulence statistics. An alternative scaling based on the mean velocity difference across a typical large eddy, whose dimension is determined by two-point spatial correlations, is proposed and validated. Analysis of the budget of the streamwise component of Reynolds stress shows how the new scaling is linked to the observed growth rate suppression. Dilatational contributions to the budget of turbulent kinetic energy are found to increase rapidly with Mach number, but remain small even at Mc = 1.8 despite the fact that shocklets are found at high Mach numbers. Flow visualizations show that at low Mach numbers the mixing region is dominated by large azimuthally correlated rollers whereas at high Mach numbers the flow is dominated by small streamwise oriented structures. An acoustic timescale limitation for supersonically deforming eddies is found to be consistent with the observations and scalings and is offered as a possible explanation for the decrease in transverse lengthscale.

Effect of an Azimuthal Mean Flow On the Structure and Stability of Thermoacoustic Modes in an Annular Combustor Model with Electroacoustic Feedback

2020 ◽  
Author(s):  
Sylvain C. Humbert ◽  
Jonas Moeck ◽  
Alessandro Orchini ◽  
Christian Oliver Paschereit
Keyword(s):  
Mach Number ◽  
Initial Conditions ◽  
Mean Flow ◽  
Final State ◽  
Mean Velocity ◽  
Acoustic Damping ◽  
Annular Combustor ◽  
The Mean ◽  
High Mach ◽  
The Stability

Abstract Thermoacoustic oscillations in axisymmetric annular combustors are generally coupled by degenerate azimuthal modes, which can be of standing or spinning nature. Symmetry breaking due to the presence of a mean azimuthal flow splits the degenerate thermoacoustic eigenvalues, resulting in pairs of counter-spinning modes with close but distinct frequencies and growth rates. In this study, experiments have been performed using an annular system where the thermoacoustic feedback due to the flames is mimicked by twelve identical electroacoustic feedback loops. The mean azimuthal flow is generated by fans. We investigate the standing/spinning nature of the oscillations as a function of the Mach number for two types of initial states, and how the stability of the system is affected by the mean azimuthal flow. It is found that spinning, standing or mixed modes can be encountered at very low Mach number, but increasing the mean velocity promotes one spinning direction. At sufficiently high Mach number, spinning modes are observed in the limit cycle oscillations. In some cases, the initial conditions have a significant impact on the final state of the system. It is found that the presence of a mean azimuthal flow increases the acoustic damping. This has a beneficial effect on stability: it often reduces the amplitude of the self-sustained oscillations, and can even suppress them in some cases. However, we observe that the suppression of a mode due to the mean flow may destabilize another one. We discuss our findings in relation with an existing low-order model.

Experimental Study of Flow Inside a Centrifugal Fan Using Magnetic Resonance Velocimetry

2019 ◽  
Author(s):  
Davis W. Hoffman ◽  
Laura Villafañe ◽  
Christopher J. Elkins ◽  
John K. Eaton
Keyword(s):  
Three Dimensional ◽  
Leading Edge ◽  
Suction Side ◽  
Reynolds Numbers ◽  
Centrifugal Fan ◽  
Mean Flow ◽  
Magnetic Resonance Velocimetry ◽  
Flow Features ◽  
Outlet Flow ◽  
The Mean

Abstract Three-dimensional, three-component time-averaged velocity fields have been measured within a low-speed centrifugal fan with forward curved blades. The model investigated is representative of fans commonly used in automotive HVAC applications. The flow was analyzed at two Reynolds numbers for the same ratio of blade rotational speed to outlet flow velocity. The flow patterns inside the volute were found to have weak sensitivity to Reynolds number. A pair of counter-rotating vortices evolve circumferentially within the volute with positive and negative helicity in the upper and lower regions, respectively. Measurements have been further extended to capture phase-resolved flow features by synchronizing the data acquisition with the blade passing frequency. The mean flow field through each blade passage is presented including the jet-wake structure extending from the blade and the separation zone on the suction side of the blade leading edge.

Sign in / Sign up

Export Citation Format

Share Document