On the effects of finite-rate carbon/oxygen chemistry on supersonic jet instability

2012 ◽  
Vol 713 ◽  
pp. 330-361 ◽  
Author(s):  
Luca Massa ◽  
Prashaanth Ravindran
Keyword(s):  
Resonance Condition ◽  
Supersonic Jet ◽  
Chemical Properties ◽  
Bypass Transition ◽  
Exchange Reactions ◽  
Engine Exhaust ◽  
Turbine Engine ◽  
Acoustic Damping ◽  
Physico Chemical ◽  
Lower Temperature

AbstractThe instability of high-temperature jets is studied because of its importance to the analysis of gas-turbine engine exhaust flow, shock–shock interaction and bypass transition. The focus is on fluid–chemistry coupling, where the chemical time scales are supported by both reactive and inelastic molecular processes. The former are associated with dissociation/exchange reactions, while the latter are associated with transfers of vibrational quanta. The interaction affects both the instability growth rate and acoustic feedback by sustaining thermo-acoustic damping. Resonance conditions are identified as those that yield the maximum damping against the Damköhler number. The main results of the present study are the explanation of the dichotomy between vortical and acoustic modes in relation to the thermo-acoustic damping, and the analysis of the resonance condition as it depends on the physico-chemical properties of carbon/oxygen mixtures. The ability of a mode to support thermo-acoustic damping is related to the local convective Mach number of its most amplified frequency, and thus to the phenomenon of acoustic trapping in the jet core. Regarding the second issue, carbon dioxide acts as the best damper at low jet temperatures ${T}_{j} \approx 1000~\mathrm{K} $, where the vibrational relaxation is the main chemical scale, and up to ${T}_{j} = 3500~\mathrm{K} $ because its reactive chemistry resonates with the fluid fluctuation at a lower temperature than the dissociation of ${\mathrm{O} }_{2} $. At higher temperatures, oxygen is the best damper because of the larger endothermicity of the reactions it supports.

Reaction of Elemental Sulfur and Mercaptobenzothiazole

1956 ◽  
Vol 29 (4) ◽  
pp. 1369-1372
Author(s):  
G. A. Blokh ◽  
E. A. Golubkova ◽  
G. P. Miklukhin
Keyword(s):  
Elemental Sulfur ◽  
Active Form ◽  
Chemical Properties ◽  
Intermediate Compound ◽  
Point Of View ◽  
Experimental Fact ◽  
Acceleration Process ◽  
Physico Chemical ◽  
Lower Temperature ◽  
Vulcanization Process

Abstract One of the most important problems in the field of the physics and chemistry of rubber is that of vulcanization. Until now no single theory has been established, which elucidates the complex physico-chemical changes which occur during this process. Still more obscure has been the mechanism of the action of vulcanization accelerators, which, as is well known, not only reduce the time and the temperature of vulcanization, but also influence the physico-mechanical and chemical properties of the rubber. Most investigators have assumed that in the acceleration process a reaction with sulfur converts it to an active form which is capable of bringing about vulcanization at a lower temperature and at a greater rate, than with ordinary elemental sulfur in the absence of an accelerator. This point of view is based on the experimental fact that the vulcanization of rubber by sulfur dioxide and hydrogen sulfide, for example, which form sulfur in the nascent condition, proceeds rapidly even at room temperature. Investigators have also assumed that in the vulcanization process activation of sulfur in the presence of accelerators may occur by different mechanisms. It is possible that the accelerator, reacting with elemental sulfur, forms unstable intermediate compounds, which decompose with liberation of sulfur in an active form. The latter reacts with rubber, and the regenerated accelerator reacts again with elemental sulfur, etc. However, a different process is possible for the activation of elemental sulfur. By this second mechanism the unstable combination of accelerator and sulfur reacts directly with rubber without the formation of active sulfur. Both these mechanisms necessarily assume the formation of intermediate unstable combinations of the accelerator with sulfur. However, direct, experimentally-based demonstrations of such an interaction are lacking in the literature. There exist only theoretical hypotheses concerning the nature of the possible intermediate combination of the accelerator with sulfur. According to Ostromislensky's concepts, further developed by Bedford, such an intermediate compound has the character of a polysulfide. According to Bruni and Romani, this intermediate compound is a disulfide. As is well known, the disulfide theory was placed in doubt by Zaide and Petrov on the basis of data from the vulcanization of rubber in the presence of benzothiazolyl disulfide.

Decoration of specific sites on freeze-fractured membranes

1978 ◽  
Vol 36 (2) ◽  
pp. 140-141
Author(s):  
H. Gross ◽  
H. Moor
Keyword(s):  
Pure Water ◽  
Freeze Fracture ◽  
Chemical Properties ◽  
Surface Forces ◽  
Sulfate Pentahydrate ◽  
Copper Sulfate Pentahydrate ◽  
Physico Chemical ◽  
Water Of Hydration ◽  
Small Container ◽  
Binding Forces

Fracturing under ultrahigh vacuum (UHV, p ≤ 10-9 Torr) produces membrane fracture faces devoid of contamination. Such clean surfaces are a prerequisite foe studies of interactions between condensing molecules is possible and surface forces are unequally distributed, the condensate will accumulate at places with high binding forces; crystallites will arise which may be useful a probes for surface sites with specific physico-chemical properties. Specific “decoration” with crystallites can be achieved nby exposing membrane fracture faces to water vopour. A device was developed which enables the production of pure water vapour and the controlled variation of its partial pressure in an UHV freeze-fracture apparatus (Fig.1a). Under vaccum (≤ 10-3 Torr), small container filled with copper-sulfate-pentahydrate is heated with a heating coil, with the temperature controlled by means of a thermocouple. The water of hydration thereby released enters a storage vessel.

Physico-Chemical Properties of Recombinant Desulphatohirudin

1990 ◽  
Vol 63 (03) ◽  
pp. 499-504 ◽  
Author(s):  
A Electricwala ◽  
L Irons ◽  
R Wait ◽  
R J G Carr ◽  
R J Ling ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Gel Filtration ◽  
Chemical Properties ◽  
Alpha Helix ◽  
Apparent Molecular Weight ◽  
Correlation Spectroscopy ◽  
Nmr Studies ◽  
Recombinant Hirudin ◽  
Physico Chemical ◽  
Recombinant Molecule

SummaryPhysico-chemical properties of recombinant desulphatohirudin expressed in yeast (CIBA GEIGY code No. CGP 39393) were reinvestigated. As previously reported for natural hirudin, the recombinant molecule exhibited abnormal behaviour by gel filtration with an apparent molecular weight greater than that based on the primary structure. However, molecular weight estimation by SDS gel electrophoresis, FAB-mass spectrometry and Photon Correlation Spectroscopy were in agreement with the theoretical molecular weight, with little suggestion of dimer or aggregate formation. Circular dichroism studies of the recombinant molecule show similar spectra at different pH values but are markedly different from that reported by Konno et al. (13) for a natural hirudin-variant. Our CD studies indicate the presence of about 60% beta sheet and the absence of alpha helix in the secondary structure of recombinant hirudin, in agreement with the conformation determined by NMR studies (17)

Physico-chemical properties of the rare-earth metals, scandium, and yttrium

1963 ◽  
Vol 79 (2) ◽  
pp. 263-293 ◽  
Author(s):  
E.M. Savitskii ◽  
V.F. Terekhova ◽  
O.P. Naumkin
Keyword(s):  
Rare Earth ◽  
Rare Earth Metals ◽  
Chemical Properties ◽  
Physico Chemical ◽  
The Rare Earth

Physico chemical properties and gas adsorption separation characteristics of Itaya zeolite and its modified products.

1990 ◽  
Vol 39 (442) ◽  
pp. 996-1000 ◽  
Author(s):  
Ayao TAKASAKA ◽  
Hideyuki NEMOTO ◽  
Hirohiko KONO ◽  
Yoshihiro MATSUDA
Keyword(s):  
Gas Adsorption ◽  
Chemical Properties ◽  
Physico Chemical

Development of Ketchup from Sudanese Red karkade (Hibiscus sabdariffa L.) byproduct

Food Biology ◽  
1970 ◽  
pp. 19-23
Author(s):  
Nawal Abdel-Gayoum Abdel-Rahman
Keyword(s):  
Sensory Quality ◽  
Chemical Properties ◽  
Storage Period ◽  
Gum Arabic ◽  
Raw Material ◽  
Soluble Solids ◽  
Hibiscus Sabdariffa ◽  
Overall Acceptability ◽  
Physico Chemical ◽  
Tomato Ketchup

The aim of this study is to use of karkede (Hibiscus sabdariffa L.) byproduct as raw material to make ketchup instead of tomato. Ketchup is making of various pulps, but the best type made from tomatoes. Roselle having adequate amounts of macro and micro elements, and it is rich in source of anthocyanine. The ketchup made from pulped of waste of soaked karkede, and homogenized with starch, salt, sugar, ginger (Zingiber officinale), kusbara (Coriandrum sativum) and gum Arabic. Then processed and filled in glass bottles and stored at two different temperatures, ambient and refrigeration. The total solids, total soluble solids, pH, ash, total titratable acidity and vitamin C of ketchup were determined. As well as, total sugars, reducing sugars, colour density, and sodium chloride percentage were evaluated. The sensory quality of developed product was determined immediately and after processing, which included colour, taste, odour, consistency and overall acceptability. The suitability during storage included microbial growth, physico-chemical properties and sensory quality. The karkede ketchup was found free of contaminants throughout storage period at both storage temperatures. Physico-chemical properties were found to be significantly differences at p?0.05 level during storage. There were no differences between karkade ketchup and market tomato ketchup concerning odour, taste, odour, consistency and overall acceptability. These results are encouraging for use of roselle cycle as a raw material to make acceptable karkade ketchup.

Graph Neural Networks for Prediction of Fuel Ignition Quality

2020 ◽  
Author(s):  
Artur Schweidtmann ◽  
Jan Rittig ◽  
Andrea König ◽  
Martin Grohe ◽  
Alexander Mitsos ◽  
...  
Keyword(s):  
Neural Networks ◽  
Octane Number ◽  
Molecular Graph ◽  
Chemical Properties ◽  
Graph Representation ◽  
Structure Property ◽  
Oxygenated Hydrocarbons ◽  
Physico Chemical ◽  
Ignition Quality ◽  
Graph Neural Networks

<div>Prediction of combustion-related properties of (oxygenated) hydrocarbons is an important and challenging task for which quantitative structure-property relationship (QSPR) models are frequently employed. Recently, a machine learning method, graph neural networks (GNNs), has shown promising results for the prediction of structure-property relationships. GNNs utilize a graph representation of molecules, where atoms correspond to nodes and bonds to edges containing information about the molecular structure. More specifically, GNNs learn physico-chemical properties as a function of the molecular graph in a supervised learning setup using a backpropagation algorithm. This end-to-end learning approach eliminates the need for selection of molecular descriptors or structural groups, as it learns optimal fingerprints through graph convolutions and maps the fingerprints to the physico-chemical properties by deep learning. We develop GNN models for predicting three fuel ignition quality indicators, i.e., the derived cetane number (DCN), the research octane number (RON), and the motor octane number (MON), of oxygenated and non-oxygenated hydrocarbons. In light of limited experimental data in the order of hundreds, we propose a combination of multi-task learning, transfer learning, and ensemble learning. The results show competitive performance of the proposed GNN approach compared to state-of-the-art QSPR models making it a promising field for future research. The prediction tool is available via a web front-end at www.avt.rwth-aachen.de/gnn.</div>

Theoretical Exploration of 2,2’-Bipyridines as Electro-Active Compounds in Flow Batteries

2019 ◽  
Author(s):  
Mariano Sánchez-Castellanos ◽  
Martha M. Flores-Leonar ◽  
Zaahel Mata-Pinzón ◽  
Humberto G. Laguna ◽  
Karl García-Ruiz ◽  
...  
Keyword(s):  
Redox Potential ◽  
Active Material ◽  
Chemical Properties ◽  
Small Subset ◽  
Solubility In Water ◽  
Protonation Reaction ◽  
Redox Active ◽  
Physico Chemical ◽  
Pka Value ◽  
Flow Batteries

Compounds from the 2,2’-bipyridine molecular family were investigated for use as redox-active materials in organic flow batteries. For 156 2,2’-bipyridine derivatives reported in the academic literature, we calculated the redox potential, the pKa for the first protonation reaction, and the solubility in aqueous solutions. Using experimental data on a small subset of derivatives, we were able to calibrate our calculations. We find that functionalization with electron-withdrawing groups leads to an increase of the redox potential and to an increase of the molecular acidity (as expressed in a reduction of the pKa value for the first protonation step). Furthermore, calculations of solubility in water indicate that some of the studied derivatives have adequate solubility for flow battery applications. Based on an analysis of the physico-chemical properties of the 156 studied compounds, we down-select five molecules with carbonyl- and nitro-based functional groups, whose parameters are especially promising for potential application as negative redox-active material inorganic flow batteries.

Sign in / Sign up

Export Citation Format

Share Document