scholarly journals From travelling waves to mild chaos: a supercritical bifurcation cascade in pipe flow

2012 ◽  
Vol 709 ◽  
pp. 149-190 ◽  
Author(s):  
F. Mellibovsky ◽  
B. Eckhardt
Keyword(s):  
Invariant Manifolds ◽  
Travelling Waves ◽  
Path Following ◽  
Reynolds Numbers ◽  
Discrete Symmetry ◽  
Limited Range ◽  
Wide Range ◽  
Full State ◽  
Invariant States ◽  
The Waves

AbstractWe study numerically a succession of transitions in pipe Poiseuille flow that lead from simple travelling waves to waves with chaotic time-dependence. The waves at the origin of the bifurcation cascade are twofold azimuthally periodic, shift–reflect symmetric, and have a non-dimensional axial wavelength of $1. 927$ diameters. As the Reynolds number is increased, successive transitions result in a wide range of time-dependent solutions that include spiralling, modulated travelling, modulated spiralling, doubly modulated spiralling and mildly chaotic waves. Numerical evidence suggests that the latter spring from heteroclinic tangles of the stable and unstable invariant manifolds of two shift–reflect symmetric, modulated travelling waves. The chaotic set thus produced is confined to a limited range of Reynolds numbers, bounded by the occurrence of manifold tangencies. The subspace of discrete symmetry to which the states studied here belong makes many of the bifurcation and path-following investigations presented readily accessible. However, we expect that most of the phenomenology carries over to the full state space, thus suggesting a mechanism for the formation and break-up of invariant states that can give rise to chaotic dynamics.

Nonlinear exact coherent structures in pipe flow and their instabilities

2019 ◽  
Vol 868 ◽  
pp. 341-368 ◽  
Author(s):  
Ozge Ozcakir ◽  
Philip Hall ◽  
Saleh Tanveer
Keyword(s):  
Unstable Mode ◽  
Travelling Waves ◽  
Wave Interaction ◽  
Reynolds Numbers ◽  
Large Reynolds Number ◽  
Interaction Theory ◽  
Asymptotic Results ◽  
Instability Modes ◽  
Viscous Core ◽  
The Waves

In this paper, we present computational results of some two-fold azimuthally symmetric travelling waves and their stability. Calculations over a range of Reynolds numbers ($Re$) reveal connections between a class of solutions computed by Wedin & Kerswell (J. Fluid Mech., vol. 508, 2004, pp. 333–371) (henceforth called the WK solution) and the $Re\rightarrow \infty$ vortex–wave interaction theory of Hall & Smith (J. Fluid Mech., vol. 227, 1991, pp. 641–666) and Hall & Sherwin (J. Fluid Mech., vol. 661, 2010, pp. 178–205). In particular, the continuation of the WK solutions to larger values of $Re$ shows that the WK solution bifurcates from a shift-and-rotate symmetric solution, which we call the WK2 state. The WK2 solution computed for $Re\leqslant 1.19\times 10^{6}$ shows excellent agreement with the theoretical $Re^{-5/6}$, $Re^{-1}$ and $O(1)$ scalings of the waves, rolls and streaks respectively. Furthermore, these states are found to have only two unstable modes in the large $Re$ regime, with growth rates estimated to be $O(Re^{-0.42})$ and $O(Re^{-0.92})$, close to the theoretical $O(Re^{-1/2})$ and $O(Re^{-1})$ asymptotic results for edge and sinuous instability modes of vortex–wave interaction states (Deguchi & Hall, J. Fluid Mech., vol. 802, 2016, pp. 634–666) in plane Couette flow. For the nonlinear viscous core states (Ozcakir et al., J. Fluid Mech., vol. 791, 2016, pp. 284–328), characterized by spatial a shrinking of the wave and roll structure towards the pipe centre with increasing $Re$, we continued the solution to $Re\leqslant 8\times 10^{6}$ and we find only one unstable mode in the large Reynolds number regime, with growth rate scaling as $Re^{-0.46}$ within the class of symmetry-preserving disturbances.

Gluten-Free Dry Mixtures with Rice and Amaranth for Children over Three Years Old with Gluten Intolerance

Food Industry ◽  
2020 ◽  
Vol 5 (1) ◽  
pp. 23-31
Author(s):  
Sergey Urubkov ◽  
Svetlana Khovanskaya ◽  
Ekaterina Pyrieva ◽  
Olga Georgieva ◽  
Stanislav Smirnov
Keyword(s):  
Celiac Disease ◽  
Treatment Effectiveness ◽  
Raw Materials ◽  
Calculated Data ◽  
Limited Range ◽  
Gluten Free ◽  
Fruit And Vegetable ◽  
Organoleptic Evaluation ◽  
Free Products ◽  
Wide Range

Diet therapy is one of the main approaches to the treatment of a wide range of diseases of the digestive system. The treatment effectiveness of celiac disease depends on how strictly the patient adheres to a gluten-free diet. It is often disrupted due to the limited range of recommended foods and dishes, especially for children who are particularly sensitive to dietary restrictions. In this case, the development of new types of specialized gluten-free products is relevant, allowing to expand the diet both in terms of nutritional value and taste diversity. This study concerns the recipe developments of dry gluten-free mixtures using rice and amaranth with the inclusion of fruit and vegetable and berry raw materials intended for the nutrition of children over three years old suffering from celiac disease. When developing the recipes, researchers used various combinations of rice and amaranth flour, as well as fruit and vegetable powders. The rice flour composition varied in the range from 15 to 75%; amaranth – from 15 to 45%; fruit and vegetable and berry powders – up to 10%. The finished product was gluten-free cookies, muffins, pancakes made of rice and amaranth. Organoleptic evaluation showed that the studied samples of gluten-free cookies have high quality characteristics, have a pleasant taste and aroma. According to the calculated data, specialized gluten-free dry mixtures intended for children over three years with celiac disease can serve as an important source of: vegetable carbohydrates – from 26.81 to 55.19 g / 100g of finished products; protein – from 4.06 to 11.82 g/100g of finished products; dietary fiber – from 3.82 to 6.36 g/100g of finished products; and energy – from 158.12 to 333.96 kcal/100g of finished products) The developed recipess of gluten-free products can help to provide children with an adequate amount of nutrients and energy.

Turbulent three-dimensional dielectric electrohydrodynamic convection between two plates

2012 ◽  
Vol 696 ◽  
pp. 228-262 ◽  
Author(s):  
A. Kourmatzis ◽  
J. S. Shrimpton
Keyword(s):  
Spatial Data ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Two Dimensions ◽  
Three Dimensions ◽  
Energy Budgets ◽  
Turbulent Regime ◽  
Scalar Flux ◽  
Wide Range ◽  
Scalar Variance

AbstractThe fundamental mechanisms responsible for the creation of electrohydrodynamically driven roll structures in free electroconvection between two plates are analysed with reference to traditional Rayleigh–Bénard convection (RBC). Previously available knowledge limited to two dimensions is extended to three-dimensions, and a wide range of electric Reynolds numbers is analysed, extending into a fully inherently three-dimensional turbulent regime. Results reveal that structures appearing in three-dimensional electrohydrodynamics (EHD) are similar to those observed for RBC, and while two-dimensional EHD results bear some similarities with the three-dimensional results there are distinct differences. Analysis of two-point correlations and integral length scales show that full three-dimensional electroconvection is more chaotic than in two dimensions and this is also noted by qualitatively observing the roll structures that arise for both low (${\mathit{Re}}_{E} = 1$) and high electric Reynolds numbers (up to ${\mathit{Re}}_{E} = 120$). Furthermore, calculations of mean profiles and second-order moments along with energy budgets and spectra have examined the validity of neglecting the fluctuating electric field ${ E}_{i}^{\ensuremath{\prime} } $ in the Reynolds-averaged EHD equations and provide insight into the generation and transport mechanisms of turbulent EHD. Spectral and spatial data clearly indicate how fluctuating energy is transferred from electrical to hydrodynamic forms, on moving through the domain away from the charging electrode. It is shown that ${ E}_{i}^{\ensuremath{\prime} } $ is not negligible close to the walls and terms acting as sources and sinks in the turbulent kinetic energy, turbulent scalar flux and turbulent scalar variance equations are examined. Profiles of hydrodynamic terms in the budgets resemble those in the literature for RBC; however there are terms specific to EHD that are significant, indicating that the transfer of energy in EHD is also attributed to further electrodynamic terms and a strong coupling exists between the charge flux and variance, due to the ionic drift term.

scholarly journals Focusing of Particles in a Microchannel with Laser Engraved Groove Arrays

Biosensors ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 263
Author(s):  
Tianlong Zhang ◽  
Yigang Shen ◽  
Ryota Kiya ◽  
Dian Anggraini ◽  
Tao Tang ◽  
...  
Keyword(s):  
Open Space ◽  
Lateral Displacement ◽  
Reynolds Numbers ◽  
Secondary Flows ◽  
Particle Sedimentation ◽  
Nanoparticle Separation ◽  
Wide Range ◽  
Fs Laser ◽  
Channel Bottom ◽  
Myoblast Cells

Continuous microfluidic focusing of particles, both synthetic and biological, is significant for a wide range of applications in industry, biology and biomedicine. In this study, we demonstrate the focusing of particles in a microchannel embedded with glass grooves engraved by femtosecond pulse (fs) laser. Results showed that the laser-engraved microstructures were capable of directing polystyrene particles and mouse myoblast cells (C2C12) towards the center of the microchannel at low Reynolds numbers (Re < 1). Numerical simulation revealed that localized side-to-center secondary flows induced by grooves at the channel bottom play an essential role in particle lateral displacement. Additionally, the focusing performance proved to be dependent on the angle of grooves and the middle open space between the grooves based on both experiments and simulation. Particle sedimentation rate was found to critically influence the focusing of particles of different sizes. Taking advantage of the size-dependent particle lateral displacement, selective focusing of micrometer particles was demonstrated. This study systematically investigated continuous particle focusing in a groove-embedded microchannel. We expect that this device will be used for further applications, such as cell sensing and nanoparticle separation in biological and biomedical areas.

scholarly journals A broadbanded pressure differential wave energy converter based on dielectric elastomer generators

2021 ◽  
Author(s):  
Michele Righi ◽  
Giacomo Moretti ◽  
David Forehand ◽  
Lorenzo Agostini ◽  
Rocco Vertechy ◽  
...  
Keyword(s):  
Wave Energy ◽  
Large Deformations ◽  
Dielectric Elastomer ◽  
Wave Energy Converter ◽  
Pressure Differential ◽  
Design Stage ◽  
Small Scale ◽  
Energy Converter ◽  
Wide Range ◽  
The Waves

AbstractDielectric elastomer generators (DEGs) are a promising option for the implementation of affordable and reliable sea wave energy converters (WECs), as they show considerable promise in replacing expensive and inefficient power take-off systems with cheap direct-drive generators. This paper introduces a concept of a pressure differential wave energy converter, equipped with a DEG power take-off operating in direct contact with sea water. The device consists of a closed submerged air chamber, with a fluid-directing duct and a deformable DEG power take-off mounted on its top surface. The DEG is cyclically deformed by wave-induced pressure, thus acting both as the power take-off and as a deformable interface with the waves. This layout allows the partial balancing of the stiffness due to the DEG’s elasticity with the negative hydrostatic stiffness contribution associated with the displacement of the water column on top of the DEG. This feature makes it possible to design devices in which the DEG exhibits large deformations over a wide range of excitation frequencies, potentially achieving large power capture in a wide range of sea states. We propose a modelling approach for the system that relies on potential-flow theory and electroelasticity theory. This model makes it possible to predict the system dynamic response in different operational conditions and it is computationally efficient to perform iterative and repeated simulations, which are required at the design stage of a new WEC. We performed tests on a small-scale prototype in a wave tank with the aim of investigating the fluid–structure interaction between the DEG membrane and the waves in dynamical conditions and validating the numerical model. The experimental results proved that the device exhibits large deformations of the DEG power take-off over a broad range of monochromatic and panchromatic sea states. The proposed model demonstrates good agreement with the experimental data, hence proving its suitability and effectiveness as a design and prediction tool.

The Effect of Pulsed Blowing on the Boundary Layer of a Highly Loaded Low Pressure Turbine Blade

2013 ◽  
Author(s):  
Marion Mack ◽  
Roland Brachmanski ◽  
Reinhard Niehuis
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Mach Number ◽  
Suction Side ◽  
Reynolds Numbers ◽  
Low Pressure ◽  
Trailing Edge ◽  
Low Pressure Turbine ◽  
Wide Range ◽  
Highly Loaded

The performance of the low pressure turbine (LPT) can vary appreciably, because this component operates under a wide range of Reynolds numbers. At higher Reynolds numbers, mid and aft loaded profiles have the advantage that transition of suction side boundary layer happens further downstream than at front loaded profiles, resulting in lower profile loss. At lower Reynolds numbers, aft loading of the blade can mean that if a suction side separation exists, it may remain open up to the trailing edge. This is especially the case when blade lift is increased via increased pitch to chord ratio. There is a trend in research towards exploring the effect of coupling boundary layer control with highly loaded turbine blades, in order to maximize performance over the full relevant Reynolds number range. In an earlier work, pulsed blowing with fluidic oscillators was shown to be effective in reducing the extent of the separated flow region and to significantly decrease the profile losses caused by separation over a wide range of Reynolds numbers. These experiments were carried out in the High-Speed Cascade Wind Tunnel of the German Federal Armed Forces University Munich, Germany, which allows to capture the effects of pulsed blowing at engine relevant conditions. The assumed control mechanism was the triggering of boundary layer transition by excitation of the Tollmien-Schlichting waves. The current work aims to gain further insight into the effects of pulsed blowing. It investigates the effect of a highly efficient configuration of pulsed blowing at a frequency of 9.5 kHz on the boundary layer at a Reynolds number of 70000 and exit Mach number of 0.6. The boundary layer profiles were measured at five positions between peak Mach number and the trailing edge with hot wire anemometry and pneumatic probes. Experiments were conducted with and without actuation under steady as well as periodically unsteady inflow conditions. The results show the development of the boundary layer and its interaction with incoming wakes. It is shown that pulsed blowing accelerates transition over the separation bubble and drastically reduces the boundary layer thickness.

Predictions of the Effect of Roughness on Heat Transfer From Turbine Airfoils

1998 ◽  
Author(s):  
Anil K. Tolpadi ◽  
Michael E. Crawford
Keyword(s):  
Heat Transfer ◽  
Side Surface ◽  
Suction Side ◽  
Reynolds Numbers ◽  
Surface Finishing ◽  
Transfer Coefficients ◽  
Average Roughness ◽  
Wide Range ◽  
Turbine Airfoils ◽  
Good Agreement

The heat transfer and aerodynamic performance of turbine airfoils are greatly influenced by the gas side surface finish. In order to operate at higher efficiencies and to have reduced cooling requirements, airfoil designs require better surface finishing processes to create smoother surfaces. In this paper, three different cast airfoils were analyzed: the first airfoil was grit blasted and codep coated, the second airfoil was tumbled and aluminide coated, and the third airfoil was polished further. Each of these airfoils had different levels of roughness. The TEXSTAN boundary layer code was used to make predictions of the heat transfer along both the pressure and suction sides of all three airfoils. These predictions have been compared to corresponding heat transfer data reported earlier by Abuaf et al. (1997). The data were obtained over a wide range of Reynolds numbers simulating typical aircraft engine conditions. A three-parameter full-cone based roughness model was implemented in TEXSTAN and used for the predictions. The three parameters were the centerline average roughness, the cone height and the cone-to-cone pitch. The heat transfer coefficient predictions indicated good agreement with the data over most Reynolds numbers and for all airfoils-both pressure and suction sides. The transition location on the pressure side was well predicted for all airfoils; on the suction side, transition was well predicted at the higher Reynolds numbers but was computed to be somewhat early at the lower Reynolds numbers. Also, at lower Reynolds numbers, the heat transfer coefficients were not in very good agreement with the data on the suction side.

CFD Simulation of Fluid Flow Through Porous Media: Application to Decomposed Gases Flow Through Foam Pattern in Lost Foam Casting

Materials ◽  
2003 ◽  
Author(s):  
Sayavur I. Bakhtiyarov ◽  
Ruel A. Overfelt
Keyword(s):  
Cfd Simulation ◽  
Reynolds Numbers ◽  
Phase Flow ◽  
Flow Through Porous Media ◽  
Foam Material ◽  
Element Analysis ◽  
Wide Range ◽  
Flow Through ◽  
Foam Pattern ◽  
Lost Foam

Numerical simulation of decomposed gases through foam pattern was conducted using finite element analysis. A new kinetic model is proposed for gaseos phase flow between molten metal and foam material. The computations were performed for a wide range of Reynolds numbers. The results of the simulations are compared with the experiemental data obtained in this study.

Calculation of the primary trajectories of seeds and other particles in strong winds

1983 ◽  
Vol 219 (1215) ◽  
pp. 217-217
Keyword(s):  
Equations Of Motion ◽  
Aerodynamic Resistance ◽  
Reynolds Numbers ◽  
Spherical Particles ◽  
Spores And Pollen ◽  
General Terms ◽  
Wide Range ◽  
Strong Winds ◽  
Dispersal Distances ◽  
Enormous Number

The movement of variously dense spherical particles representing a variety of seeds, fruits, spores and pollen, and released from rest into arbitrary winds and a gravitational field is discussed in general terms that account in detail for changes in the quasi-static aerodynamic resistance to motion experienced by such particles during aerial flight. A hybrid analytical-empirical law is established which describes this resistance fairly accurately for particle Reynolds numbers in the range 0—60 000 and that allows for the numerical integration of the equations of motion so as to cover a very wide range of flight conditions. This makes possible the provision of a set of four-parameter universal range tables from which the dispersal distances for an enormous number of practical cases may be estimated. One particular case of particle movement in a region of pseudo-thermal convection is also discussed and this shows how a marked degree of deposition concentration may be induced in some circumstances by such a flow. Botanists and ecologists concerned with seed and particle dispersal in the environment may find the universal range tables of particular interest and use. This is because the tables obviate the need for the integration of the equations of motion when dealing with individual cases and permit an estimation of range purely on the basis of the specified quantities of particle size, density and altitude of release, atmospheric wind speed, density and viscosity, and the acceleration due to gravity.

Experimental Investigation of Subsonic Turbulent Flow Over Single and Double Backward Facing Steps

1962 ◽  
Vol 84 (3) ◽  
pp. 317-325 ◽  
Author(s):  
D. E. Abbott ◽  
S. J. Kline
Keyword(s):  
Experimental Investigation ◽  
Velocity Profile ◽  
Flow Pattern ◽  
Reynolds Numbers ◽  
Area Ratio ◽  
Single Step ◽  
Reattachment Length ◽  
Double Step ◽  
Wide Range ◽  
Geometric Variables

Results are presented for flow patterns over backward facing steps covering a wide range of geometric variables. Velocity profile measurements are given for both single and double steps. The stall region is shown to consist of a complex pattern involving three distinct regions. The double step contains an assymmetry for large expansions, but approaches the single-step configuration with symmetric stall regions for small values of area ratio. No effect on flow pattern or reattachment length is found for a wide range of Reynolds numbers and turbulence intensities, provided the flow is fully turbulent before the step.

Sign in / Sign up

Export Citation Format

Share Document