Three-dimensional vortex structure on a rotating wing

2012 ◽  
Vol 707 ◽  
pp. 541-550 ◽  
Author(s):  
Cem A. Ozen ◽  
D. Rockwell
Keyword(s):  
Three Dimensional ◽  
Leading Edge ◽  
Dimensional Structure ◽  
Radius Of Gyration ◽  
Leading Edge Vortex ◽  
Image Velocimetry ◽  
Edge Vortex ◽  
Vorticity Flux ◽  
Rotating Wing ◽  
Spanwise Flow

AbstractThe three-dimensional structure of the leading-edge vortex on a rotating wing is addressed using a technique of particle image velocimetry. Organized patterns of chordwise-oriented vorticity, which exist within the vortex, arise from the spanwise flow along the surface of the wing, which can attain a velocity the same order as the velocity of the wing at its radius of gyration. These patterns are related to the strength (circulation) and coherence of the tip and root vortices. The associated distributions of spanwise-oriented vorticity along the leading-edge vortex are characterized in relation to the vorticity flux and downwash along the wing.

scholarly journals The leading-edge vortex on a rotating wing changes markedly beyond a certain central body size

2018 ◽  
Vol 5 (7) ◽  
pp. 172197 ◽  
Author(s):  
Shantanu S. Bhat ◽  
Jisheng Zhao ◽  
John Sheridan ◽  
Kerry Hourigan ◽  
Mark C. Thompson
Keyword(s):  
Reynolds Number ◽  
Body Size ◽  
Central Body ◽  
Three Dimensional ◽  
Leading Edge ◽  
Particle Image Velocimetry Technique ◽  
Leading Edge Vortex ◽  
Rapid Acquisition ◽  
Edge Vortex ◽  
Rotating Wing

Stable attachment of a leading-edge vortex (LEV) plays a key role in generating the high lift on rotating wings with a central body. The central body size can affect the LEV structure broadly in two ways. First, an overall change in the size changes the Reynolds number, which is known to have an influence on the LEV structure. Second, it may affect the Coriolis acceleration acting across the wing, depending on the wing-offset from the axis of rotation. To investigate this, the effects of Reynolds number and the wing-offset are independently studied for a rotating wing. The three-dimensional LEV structure is mapped using a scanning particle image velocimetry technique. The rapid acquisition of images and their correlation are carefully validated. The results presented in this paper show that the LEV structure changes mainly with the Reynolds number. The LEV-split is found to be only minimally affected by changing the central body radius in the range of small offsets, which interestingly includes the range for most insects. However, beyond this small offset range, the LEV-split is found to change dramatically.

Flow structure on a simultaneously pitching and rotating wing

2014 ◽  
Vol 756 ◽  
pp. 354-383 ◽  
Author(s):  
M. Bross ◽  
D. Rockwell
Keyword(s):  
Flow Structure ◽  
Large Scale ◽  
Three Dimensional ◽  
Leading Edge ◽  
Tip Vortex ◽  
Pure Rotation ◽  
Large Scale Vortex ◽  
Edge Vortex ◽  
Vorticity Flux ◽  
Rotating Wing

AbstractA technique of particle image velocimetry is employed to characterize the three-dimensional flow structure on a wing subjected to simultaneous pitch-up and rotational motions. Distinctive vortical structures arise, relative to the well-known patterns on a wing undergoing either pure pitch-up or pure rotation. The features associated with these simultaneous motions include: stabilization of the large-scale vortex generated at the leading edge, which, for pure pitch-up motion, rapidly departs from the leading-edge region; preservation of the coherent vortex system involving both the tip vortex and the leading-edge vortex (LEV), which is severely degraded for pure rotational motion; and rapid relaxation of the flow structure upon termination of the pitch-up component, whereby the relaxed flow converges to a similar state irrespective of the pitch rate. Three-dimensional surfaces of iso-$\def \xmlpi #1{}\def \mathsfbi #1{\boldsymbol {\mathsf {#1}}}\let \le =\leqslant \let \leq =\leqslant \let \ge =\geqslant \let \geq =\geqslant \def \Pr {\mathit {Pr}}\def \Fr {\mathit {Fr}}\def \Rey {\mathit {Re}}{Q}$and helicity are employed in conjunction with sectional representations of spanwise vorticity, velocity and vorticity flux to interpret the flow physics.

The aerodynamics of revolving wings I. Model hawkmoth wings

2002 ◽  
Vol 205 (11) ◽  
pp. 1547-1564 ◽  
Author(s):  
James R. Usherwood ◽  
Charles P. Ellington
Keyword(s):  
Insect Flight ◽  
Leading Edge ◽  
Dynamic Stall ◽  
Leading Edge Vortex ◽  
Force Coefficients ◽  
Attached Flow ◽  
Edge Vortex ◽  
Drag And Lift ◽  
Geometric Relationship ◽  
Spanwise Flow

SUMMARYRecent work on flapping hawkmoth models has demonstrated the importance of a spiral `leading-edge vortex' created by dynamic stall, and maintained by some aspect of spanwise flow, for creating the lift required during flight. This study uses propeller models to investigate further the forces acting on model hawkmoth wings in `propeller-like' rotation (`revolution'). Steadily revolving model hawkmoth wings produce high vertical (≈ lift) and horizontal (≈ profile drag) force coefficients because of the presence of a leading-edge vortex. Both horizontal and vertical forces, at relevant angles of attack, are dominated by the pressure difference between the upper and lower surfaces; separation at the leading edge prevents `leading-edge suction'. This allows a simple geometric relationship between vertical and horizontal forces and the geometric angle of attack to be derived for thin, flat wings. Force coefficients are remarkably unaffected by considerable variations in leading-edge detail, twist and camber. Traditional accounts of the adaptive functions of twist and camber are based on conventional attached-flow aerodynamics and are not supported. Attempts to derive conventional profile drag and lift coefficients from `steady' propeller coefficients are relatively successful for angles of incidence up to 50° and, hence, for the angles normally applicable to insect flight.

Three-Dimensional Solution of Flows over Wings with Leading-Edge Vortex Separation

AIAA Journal ◽  
1976 ◽  
Vol 14 (4) ◽  
pp. 519-525 ◽  
Author(s):  
James A. Weber ◽  
Guenter W. Brune ◽  
Forrester T. Johnson ◽  
Paul Lu ◽  
Paul E. Rubbert
Keyword(s):  
Three Dimensional ◽  
Leading Edge ◽  
Dimensional Solution ◽  
Leading Edge Vortex ◽  
Vortex Separation ◽  
Edge Vortex

scholarly journals Coriolis effect and the attachment of the leading edge vortex

2017 ◽  
Vol 820 ◽  
pp. 312-340 ◽  
Author(s):  
T. Jardin
Keyword(s):  
Stokes Equations ◽  
Leading Edge ◽  
Navier Stokes ◽  
Coriolis Effect ◽  
Viscous Effects ◽  
Navier Stokes Equations ◽  
Leading Edge Vortex ◽  
Edge Vortex ◽  
Vorticity Transport ◽  
Rotating Wing

The role of the Coriolis effect on the attachment of the leading edge vortex (LEV) is investigated. Toward that end, the Navier–Stokes equations are solved in the non-inertial reference frame of a high angle of attack $\unicode[STIX]{x1D6FC}$ rotating wing with the Coriolis term being artificially tuned. Reynolds numbers in the range $Re\in [100;750]$ are considered to identify the interplay between Coriolis and viscous effects. Similarly, artificial tuning of the centrifugal term is achieved to identify the interplay between Coriolis and centrifugal effects. It is shown that (i) the Coriolis effect is the key element in LEV stability for $Re>200$, (ii) viscous effects are the key element for $Re<200$ and (iii) centrifugal effects have a marginal role. The Coriolis effect is found to promote spanwise flow in the core and behind the LEV, which is known to promote outboard vorticity transport and presumably contributes to stabilizing the aft boundary layer. These mechanisms of LEV stabilization have increased authority as $\unicode[STIX]{x1D6FC}$ decreases.

Characterization of a Three-Dimensional Leading-Edge Separation Bubble on Swept, Low Aspect-Ratio Propeller Blades

2017 ◽  
Author(s):  
Ye-Bonne Koyama Maldonado ◽  
Gregory Delattre ◽  
Cedric Illoul ◽  
Clement Dejeu ◽  
Laurent Jacquin
Keyword(s):  
Delta Wing ◽  
Separation Bubble ◽  
Three Dimensional ◽  
Leading Edge ◽  
Time Resolved ◽  
Leading Edge Vortex ◽  
Wall Structures ◽  
Edge Vortex ◽  
Propeller Blades ◽  
Leading Edge Vortices

Leading-edge vortex flows are often present on propeller blades at take-off, however, their characteristics and aerodynamic impact are still not fully understood. An experimental investigation using Time Resolved Particle Image Velocimetry (TR-PIV) has been performed on a model blade in order to classify this flow with respect to both delta wing leading-edge vortices and the low Reynolds number studies regarding leading-edge vortices on rotating blades. A numerical calculation of the experimental setup has been performed in order to assess usual numerical methods for propeller performance prediction against TR-PIV results. Similar characteristics were found with non slender delta wing vortices at low incidence, which hints that the leading-edge vortex flow may generate vortex lift. The influence of rotation on the characteristics of the leading-edge vortex is compared to that of the pressure gradient caused by the circulation distribution. A discussion on the quality of the PIV reconstruction for close-wall structures is provided.

Sign in / Sign up

Export Citation Format

Share Document