Effect of non-parallel mean flow on the Green’s function for predicting the low-frequency sound from turbulent air jets

2012 ◽  
Vol 695 ◽  
pp. 199-234 ◽  
Author(s):  
M. E. Goldstein ◽  
Adrian Sescu ◽  
M. Z. Afsar

AbstractIt is now well-known that there is an exact formula relating the far-field jet noise spectrum to the convolution product of a propagator (that accounts for the mean flow interactions) and a generalized Reynolds stress autocovariance tensor (that accounts for the turbulence fluctuations). The propagator depends only on the mean flow and an adjoint vector Green’s function for a particular form of the linearized Euler equations. Recent numerical calculations of Karabasov, Bogey & Hynes (AIAA Paper 2011-2929) for a Mach 0.9 jet show use of the true non-parallel flow Green’s function rather than the more conventional locally parallel flow result leads to a significant increase in the predicted low-frequency sound radiation at observation angles close to the downstream jet axis. But the non-parallel flow appears to have little effect on the sound radiated at $9{0}^{\ensuremath{\circ} } $ to the downstream axis. The present paper is concerned with the effects of non-parallel mean flows on the adjoint vector Green’s function. We obtain a low-frequency asymptotic solution for that function by solving a very simple second-order hyperbolic equation for a composite dependent variable (which is directly proportional to a pressure-like component of this Green’s function and roughly corresponds to the strength of a monopole source within the jet). Our numerical calculations show that this quantity remains fairly close to the corresponding parallel flow result at low Mach numbers and that, as expected, it converges to that result when an appropriately scaled frequency parameter is increased. But the convergence occurs at progressively higher frequencies as the Mach number increases and the supersonic solution never actually converges to the parallel flow result in the vicinity of a critical- layer singularity that occurs in that solution. The dominant contribution to the propagator comes from the radial derivative of a certain component of the adjoint vector Green’s function. The non-parallel flow has a large effect on this quantity, causing it (and, therefore, the radiated sound) to increase at subsonic speeds and decrease at supersonic speeds. The effects of acoustic source location can be visualized by plotting the magnitude of this quantity, as function of position. These ‘altitude plots’ (which represent the intensity of the radiated sound as a function of source location) show that while the parallel flow solutions exhibit a single peak at subsonic speeds (when the source point is centred on the initial shear layer), the non-parallel solutions exhibit a double peak structure, with the second peak occurring about two potential core lengths downstream of the nozzle. These results are qualitatively consistent with the numerical calculations reported in Karabasov et al. (2011).

1998 ◽  
Vol 370 ◽  
pp. 149-174 ◽  
Author(s):  
CHRISTOPHER K. W. TAM ◽  
LAURENT AURIAULT

It is well-known that sound generated by localized sources embedded in a jet undergoes refraction as the acoustic waves propagate through the jet mean flow. For isothermal or hot jets, the effect of refraction causes the deflection of the radiated sound waves away from the jet flow direction. This gives rise to a cone of silence around the jet axis where there is a significant reduction in the radiated sound intensity. In this work, the mean flow refraction problem is investigated through the use of the reciprocity principle. Instead of the direct source Green's function, the adjoint Green's function with the source and observation points interchanged is used to quantify the effect of mean flow on sound radiation. One advantage of the adjoint Green's function is that the Green's functions for all the source locations in the jet radiating to a given direction in the far field can be obtained in a single calculation. This provides great savings in computational effort. Another advantage of the adjoint Green's function is that there is no singularity in the jet flow so that the problem can be solved numerically with axial as well as radial mean flow gradients included in a fairly straightforward manner. Extensive numerical computations have been carried out for realistic jet flow profiles with and without exercising the locally parallel flow approximation. It is concluded that the locally parallel flow approximation is valid as long as the direction of radiation is outside the cone of silence.


2020 ◽  
Vol 143 (2) ◽  
Author(s):  
D. Veerababu ◽  
B. Venkatesham

Abstract In this study, a Green’s function-based semi-analytical method is presented to predict the transmission loss (TL) of a circular chamber having concentric perforated screens. Initially, the Green’s function is developed for a single-screen configuration as the summation of eigenfunctions of the inner pipe in the absence of the mean flow. The inlet and the outlet ports are modeled as oscillating piston sources. A transfer matrix is formulated from the velocity potential generated by the piston sources. The results obtained from the proposed method are validated with the numerical and analytical models and with the experimental results available in the literature. Later, the method has been extended to the double-screen configuration. The effect of the additional perforated screen on the TL is studied in terms of the surface impedance of the chamber. Along with grazing flow considerations, guidelines are provided to incorporate more concentric perforated screens into the formulation.


2009 ◽  
Vol 8 (6) ◽  
pp. 585-602 ◽  
Author(s):  
M. Z. Afsar

A parallel shear flow representation of a jet is a standard way to solve for the wave propagation terms in jet noise modeling using the acoustic analogy. In this paper we show by introducing a new primary Green's function variable, proportional to the convective derivative of the pressure-like Green's function, the wave propagation equations reduce to an exact conservation form that does not include any derivatives of the mean flow. We analyze this Green's function variable numerically and show its utility when the mean flow is defined by a CFD solution and known only at a discrete set of points.


1996 ◽  
Vol 321 ◽  
pp. 1-24 ◽  
Author(s):  
Herbert S. Ribner

The Lighthill formalism for jet noise prediction is extended to accommodate wave transport by the mean jet flow. The extended theory combines the simplicity of the Lighthill approach with the generality of the more complex Lilley approach. There is full allowance for ‘flow-acoustic’ effects: shielding, as well as the refractive ‘cone of (relative) silence’. A source term expansion yielda a convected wave equation that retains the basic Lighthill source term. This leads to a general formula for power spectral density emitted from unit volume as the Lighthill-based value multiplied by a squared ‘normalized’ Green's function. The Green's function, referred to a stationary point source, delineates the refraction dominated ‘cone of silence’. The convective motion of the sources, with its powerful amplifying effect, also directional, is accounted for in the Lighthill factor. Source convection and wave convection are thereby decoupled, in contrast with the Lilley approach: this makes the physics more transparent. Moreover, the normalized Green's function appears to be near unity outside the ‘cone of silence’. This greatly reduces the labour of calculation: the relatively simple Lighthill-based prediction may be used beyond the cone, with extension inside via the Green's function. The function is obtained either experimentally (injected ‘point’ source) or numerically (computational aeroacoustics). Approximation by unity seems adequate except near the cone and except when there are coaxial or shrouding jets: in that case the difference from unity will quantify the shielding effect. Further extension yields dipole and monopole source terms (cf. Morfey, Mani, and others) when the mean flow possesses density gradients (e.g. hot jets).


Author(s):  
Sahib Singh Chawla

The laminar boundary layer on a magnetized plate, when the magnetic field oscillates in magnitude about a constant non-zero mean, is analysed. For low-frequency fluctuations the solution is obtained by a series expansion in terms of a frequency parameter, while for high frequencies the flow pattern is of the ‘skin-wave’ type unaffected by the mean flow. In the low-frequency range, the phase lead and the amplitude of the skin-friction oscillations increase at first and then decrease to their respective ‘skin-wave’ values. On the other hand the phase angle of the surface current decreases from 90° to 45° and its amplitude increases with frequency.


2016 ◽  
Vol 788 ◽  
pp. 521-548 ◽  
Author(s):  
L. R. Joel Sundstrom ◽  
Berhanu G. Mulu ◽  
Michel J. Cervantes

Wall shear stress measurements employing a hot-film sensor along with laser Doppler velocimetry measurements of the axial and tangential velocity and turbulence profiles in a pulsating turbulent pipe flow are presented. Time-mean and phase-averaged results are derived from measurements performed at pulsation frequencies ${\it\omega}^{+}={\it\omega}{\it\nu}/\bar{u}_{{\it\tau}}^{2}$ over the range of 0.003–0.03, covering the low-frequency, intermediate and quasi-laminar regimes. In addition to the base case of a single pulsation imposed on the mean flow, the study also investigates the flow response when two pulsations are superimposed simultaneously. The measurements from the base case show that, when the pulsation belongs to the quasi-laminar regime, the oscillating flow tends towards a laminar state in which the velocity approaches the purely viscous Stokes solution with a low level of turbulence. For ${\it\omega}^{+}<0.006$, the oscillating flow is turbulent and exhibits a region with a logarithmic velocity distribution and a collapse of the turbulence intensities, similar to the time-averaged counterparts. In the low-frequency regime, the oscillating wall shear stress is shown to be directly proportional to the Stokes length normalized in wall units $l_{s}^{+}~(=\sqrt{2/{\it\omega}^{+}})$, as predicted by quasi-steady theory. The base case measurements are used as a reference when evaluating the data from the double-frequency case and the oscillating quantities are shown to be close to superpositions from the base case. The previously established view that the time-averaged quantities are unaffected by the imposition of small-amplitude pulsed unsteadiness is shown to hold also when two pulsations are superposed on the mean flow.


Sign in / Sign up

Export Citation Format

Share Document