scholarly journals Evolution and instability of unsteady nonlinear streaks generated by free-stream vortical disturbances

2011 ◽  
Vol 677 ◽  
pp. 1-38 ◽  
Author(s):  
PIERRE RICCO ◽  
JISHENG LUO ◽  
XUESONG WU
Keyword(s):  
Boundary Layer ◽  
Free Stream ◽  
Initial Boundary ◽  
Initial Boundary Value Problem ◽  
Streamwise Velocity ◽  
Quantitative Relation ◽  
Flow Profile ◽  
Bypass Transition ◽  
Mean Flow ◽  
Free Stream Turbulence

We investigate the influence of free-stream vortical disturbances on the evolution and instability of an incompressible laminar boundary layer, focusing on components of sufficiently long wavelength, which are known to penetrate into the boundary layer to generate streamwise elongated streaks. The free-stream disturbance is assumed to be sufficiently strong (but still of small amplitude) that the induced streaks acquire an O(1) streamwise velocity in the region where the boundary-layer thickness becomes comparable with the spanwise wavelength of the perturbation. The formation and evolution of the streaks are governed by the nonlinear unsteady boundary-region equations supplemented by appropriate upstream and far-field boundary conditions. This initial-boundary-value problem is solved for the special case where the free-stream disturbance is modelled by a pair of oblique vortical modes with the same frequency but opposite spanwise wavenumbers. Nonlinearity is found to inhibit the response. The nonlinear interaction alters the mean-flow profile appreciably, the shape of which is in quantitative agreement with experimental measurements. Wall-normal inflection points are detected in the instantaneous streamwise velocity profiles. The secondary stability analysis indicates that in the presence of free-stream disturbance with an intensity of 2.8%, the resulting streaky boundary layer becomes inviscidly unstable. The characteristic frequency, phase and group velocities, and growth rate of unstable sinuous modes are found to be in broad agreement with recent experiments. The present theoretical framework allows in principle a quantitative relation to be established between the characteristics of free-stream turbulence and the secondary instability, and this relation may be exploited to develop an efficient and physics-based approach for predicting bypass transition.

Effects of Weak Free Stream Nonuniformity on Boundary Layer Transition

2005 ◽  
Vol 128 (2) ◽  
pp. 247-257 ◽  
Author(s):  
Jonathan H. Watmuff
Keyword(s):  
Boundary Layer ◽  
Layer Thickness ◽  
Free Stream ◽  
Leading Edge ◽  
Boundary Layer Transition ◽  
Bypass Transition ◽  
Mean Flow ◽  
Low Speed ◽  
Free Stream Turbulence ◽  
Thickness Variations

Experiments are described in which well-defined weak Free Stream Nonuniformity (FSN) is introduced by placing fine wires upstream of the leading edge of a flat plate. Large amplitude spanwise thickness variations form in the boundary layer as a result of the interaction between the steady laminar wakes from the wires and the leading edge. The centerline of a region of elevated layer thickness is aligned with the centerline of the wake in the freestream and the response is shown to be remarkably sensitive to the spanwise length-scale of the wakes. The region of elevated thickness is equivalent to a long narrow low speed streak in the layer. Elevated Free Stream Turbulence (FST) levels are known to produce randomly forming arrays of long narrow low speed streaks in laminar boundary layers. Therefore the characteristics of the streaks resulting from the FSN are studied in detail in an effort to gain some insight into bypass transition that occurs at elevated FST levels. The shape factors of the profiles in the vicinity of the streak appear to be unaltered from the Blasius value, even though the magnitude of the local thickness variations are as large as 60% of that of the undisturbed layer. Regions of elevated background unsteadiness appear on either side of the streak and it is shown that they are most likely the result of small amplitude spanwise modulation of the layer thickness. The background unsteadiness shares many of the characteristics of Klebanoff modes observed at elevated FST levels. However, the layer remains laminar to the end of the test section (Rx≈1.4×106) and there is no evidence of bursting or other phenomena associated with breakdown to turbulence. A vibrating ribbon apparatus is used to examine interactions between the streak and Tollmien-Schlichting (TS) waves. The deformation of the mean flow introduced by the streak is responsible for substantial phase and amplitude distortion of the waves and the breakdown of the distorted waves is more complex and it occurs at a lower Reynolds number than the breakdown of the K-type secondary instability that is observed when the FSN is not present.

Reactive control of transition induced by free-stream turbulence: an experimental demonstration

2007 ◽  
Vol 585 ◽  
pp. 41-71 ◽  
Author(s):  
FREDRIK LUNDELL
Keyword(s):  
Boundary Layer ◽  
Control System ◽  
Ad Hoc ◽  
Free Stream ◽  
Plate Boundary ◽  
Streamwise Velocity ◽  
Reactive Control ◽  
Mean Flow ◽  
Control Effect ◽  
Free Stream Turbulence

The present wind-tunnel experiment demonstrates that a reactive control system is able to decrease the amplitude of random disturbances in a flat-plate boundary layer. The disturbances were induced in a laminar boundary layer by a turbulent free stream. The control system consisted of upstream wall-shear-stress sensors (wall wires) and downstream actuators (suction through holes). An ad hoc threshold-and-delay control algorithm is evaluated and parameter variations were performed in order to find a suitable working point of the control system. Detailed measurements of the flow field show how the control influences the disturbances in the boundary layer, whereas the effect on the mean flow owing to the control is minute. The control system manages to inhibit the growth of the fluctuations of the streamwise velocity component for a considerable distance downstream of the two actuator positions. Further downstream, however, the amplitudes of the fluctuations grow again. The flow rate used to obtain the control effect is one sixth of that necessary if continuous distributed suction is used to reach the same control objective. Finally, correlations and spectra show that the elongation of the structures in the streamwise direction is eliminated in the regions where the control has the largest effect. The spanwise scale of the disturbances is not affected by the control.

An experimental study of boundary layer transition induced by a cylinder wake

2011 ◽  
Vol 684 ◽  
pp. 60-84 ◽  
Author(s):  
A. C. Mandal ◽  
J. Dey
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Late Stage ◽  
Free Stream ◽  
Experimental Studies ◽  
Boundary Layer Transition ◽  
Bypass Transition ◽  
Mean Flow ◽  
Layer Transition ◽  
Free Stream Turbulence

AbstractBoundary layer transition induced by the wake of a circular cylinder in the free stream has been investigated using the particle image velocimetry technique. Some differences between simulation and experimental studies have been reported in the literature, and these have motivated the present study. The appearance of spanwise vortices in the early stage is further confirmed here. A spanwise vortex appears to evolve into a $ \mrm{\Lambda} $/hairpin vortex; the flow statistics also confirm such vortices. With increasing Reynolds number, based on the cylinder diameter, and with decreasing cylinder height from the plate, the physical size of these hairpin-like structures is found to decrease. Some mean flow characteristics, including the streamwise growth of the disturbance energy, in a wake-induced transition resemble those in bypass transition induced by free stream turbulence. Streamwise velocity streaks that are eventually generated in the late stage often undergo sinuous-type oscillations. Similar to other transitional flows, an inclined shear layer in the wall-normal plane is often seen to oscillate and shed vortices. The normalized shedding frequency of these vortices, estimated from the spatial spacing and the convection velocity of these vortices, is found to be independent of the Reynolds number, similar to that in ribbon-induced transition. Although the nature of free stream disturbance in a wake-induced transition and that in a bypass transition are different, the late-stage features including the flow breakdown characteristics of these two transitions appear to be similar.

Effects of Reynolds Number and Free-Stream Turbulence on Boundary Layer Transition in a Compressor Cascade

2000 ◽  
Author(s):  
Heinz-Adolf Schreiber ◽  
Wolfgang Steinert ◽  
Bernhard Küsters
Keyword(s):  
Boundary Layer ◽  
Free Stream ◽  
Reynolds Numbers ◽  
Boundary Layer Transition ◽  
Bypass Transition ◽  
Layer Transition ◽  
Free Stream Turbulence ◽  
High Reynolds Numbers ◽  
High Turbulence ◽  
High Reynolds

An experimental and analytical study has been performed on the effect of Reynolds number and free-stream turbulence on boundary layer transition location on the suction surface of a controlled diffusion airfoil (CDA). The experiments were conducted in a rectilinear cascade facility at Reynolds numbers between 0.7 and 3.0×106 and turbulence intensities from about 0.7 to 4%. An oil streak technique and liquid crystal coatings were used to visualize the boundary layer state. For small turbulence levels and all Reynolds numbers tested the accelerated front portion of the blade is laminar and transition occurs within a laminar separation bubble shortly after the maximum velocity near 35–40% of chord. For high turbulence levels (Tu > 3%) and high Reynolds numbers transition propagates upstream into the accelerated front portion of the CDA blade. For those conditions, the sensitivity to surface roughness increases considerably and at Tu = 4% bypass transition is observed near 7–10% of chord. Experimental results are compared to theoretical predictions using the transition model which is implemented in the MISES code of Youngren and Drela. Overall the results indicate that early bypass transition at high turbulence levels must alter the profile velocity distribution for compressor blades that are designed and optimized for high Reynolds numbers.

Heat Transfer Committee and Turbomachinery Committee Best Paper of 1996 Award: The Path to Predicting Bypass Transition

1997 ◽  
Vol 119 (3) ◽  
pp. 405-411 ◽  
Author(s):  
R. E. Mayle ◽  
A. Schulz
Keyword(s):  
Boundary Layer ◽  
Kinetic Energy ◽  
Energy Equation ◽  
Free Stream ◽  
Bypass Transition ◽  
Turbulence Level ◽  
Free Stream Turbulence ◽  
Energy Profiles ◽  
Computer Codes ◽  
Good Agreement

A theory is presented for calculating the fluctuations in a laminar boundary layer when the free stream is turbulent. The kinetic energy equation for these fluctuations is derived and a new mechanism is revealed for their production. A methodology is presented for solving the equation using standard boundary layer computer codes. Solutions of the equation show that the fluctuations grow at first almost linearly with distance and then more slowly as viscous dissipation becomes important. Comparisons of calculated growth rates and kinetic energy profiles with data show good agreement. In addition, a hypothesis is advanced for the effective forcing frequency and free-stream turbulence level that produce these fluctuations. Finally, a method to calculate the onset of transition is examined and the results compared to data.

Boundary Layer Transition Under High Free-Stream Turbulence and Strong Acceleration Conditions: Part 1—Mean Flow Results

1997 ◽  
Vol 119 (3) ◽  
pp. 420-426 ◽  
Author(s):  
R. J. Volino ◽  
T. W. Simon
Keyword(s):  
Boundary Layer ◽  
Skin Friction ◽  
Free Stream ◽  
Boundary Layer Transition ◽  
Temperature Profiles ◽  
Mean Flow ◽  
Transfer Coefficients ◽  
Mean Velocity ◽  
Layer Transition ◽  
Free Stream Turbulence

Measurements from heated boundary layers along a concave-curved test wall subject to high (initially 8 percent) free-stream turbulence intensity and strong (K = (ν/U∞2) dU∞/dx) as high as 9 × 10−6) acceleration are presented and discussed. Conditions for the experiments were chosen to roughly simulate those present on the downstream half of the pressure side of a gas turbine airfoil. Mean velocity and temperature profiles as well as skin friction and heat transfer coefficients are presented. The transition zone is of extended length in spite of the high free-stream turbulence level. Transitional values of skin friction coefficients and Stanton numbers drop below flat-plate, low-free-stream-turbulence, turbulent flow correlations, but remain well above laminar flow values. The mean velocity and temperature profiles exhibit clear changes in shape as the flow passes through transition. To the authors’ knowledge, this is the first detailed documentation of a high-free-stream-turbulence boundary layer flow in such a strong acceleration field.

The Path to Predicting Bypass Transition

1996 ◽  
Author(s):  
R. E. Mayle ◽  
A. Schulz
Keyword(s):  
Boundary Layer ◽  
Kinetic Energy ◽  
Energy Equation ◽  
Free Stream ◽  
Bypass Transition ◽  
Turbulence Level ◽  
Free Stream Turbulence ◽  
Energy Profiles ◽  
Computer Codes ◽  
Good Agreement

A theory is presented for calculating the fluctuations in a laminar boundary layer when the free stream is turbulent. The kinetic energy equation for these fluctuations is derived and a new mechanism is revealed for their production. A methodology is presented for solving the equation using standard boundary layer computer codes. Solutions of the equation show that the fluctuations grow at first almost linearly with distance and then more slowly as viscous dissipation becomes important. Comparisons of calculated growth rates and kinetic energy profiles with data show good agreement. In addition, a hypothesis is advanced for the effective forcing frequency and free-stream turbulence level which produce these fluctuations. Finally, a method to calculate the onset of transition is examined and the results compared to data.

Effects of Weak Free Stream Nonuniformity on Boundary Layer Transition (Keynote Paper)

2003 ◽  
Author(s):  
Jonathan H. Watmuff
Keyword(s):  
Boundary Layer ◽  
Free Stream ◽  
Leading Edge ◽  
Boundary Layer Transition ◽  
Mean Flow ◽  
Layer Transition ◽  
Free Stream Turbulence ◽  
Tollmien Schlichting ◽  
Distorted Waves ◽  
Thickness Variations

Experiments are described in which well-defined FSN (Free Stream Nonuniformity) distributions are introduced by placing fine wires upstream of the leading edge of a flat plate. Large amplitude spanwise thickness variations are present in the downstream boundary layer resulting from the interaction of the laminar wakes with the leading edge. Regions of elevated background unsteadiness appear on either side of the peak layer thickness, which share many of the characteristics of Klebanoff modes, observed at elevated Free Stream Turbulence (FST) levels. However, for the low background disturbance level of the free stream, the layer remains laminar to the end of the test section (Rx ≈ l.4×106) and there is no evidence of bursting or other phenomena associated with breakdown to turbulence. A vibrating ribbon apparatus is used to demonstrate that the deformation of the mean flow is responsible for substantial phase and amplitude distortion of Tollmien-Schlichting (TS) waves. Pseudo-flow visualization of hot-wire data shows that the breakdown of the distorted waves is more complex and occurs at a lower Reynolds number than the breakdown of the K-type secondary instability observed when the FSN is not present.

scholarly journals Direct numerical simulations of transition in a compressor cascade: the influence of free-stream turbulence

2010 ◽  
Vol 665 ◽  
pp. 57-98 ◽  
Author(s):  
TAMER A. ZAKI ◽  
JAN G. WISSINK ◽  
WOLFGANG RODI ◽  
PAUL A. DURBIN
Keyword(s):  
Boundary Layer ◽  
Pressure Gradient ◽  
Free Stream ◽  
Transition To Turbulence ◽  
Surface Boundary ◽  
Bypass Transition ◽  
Suction Surface ◽  
Surface Boundary Layer ◽  
Laminar Separation ◽  
Free Stream Turbulence

The flow through a compressor passage without and with incoming free-stream grid turbulence is simulated. At moderate Reynolds number, laminar-to-turbulence transition can take place on both sides of the aerofoil, but proceeds in distinctly different manners. The direct numerical simulations (DNS) of this flow reveal the mechanics of breakdown to turbulence on both surfaces of the blade. The pressure surface boundary layer undergoes laminar separation in the absence of free-stream disturbances. When exposed to free-stream forcing, the boundary layer remains attached due to transition to turbulence upstream of the laminar separation point. Three types of breakdowns are observed; they combine characteristics of natural and bypass transition. In particular, instability waves, which trace back to discrete modes of the base flow, can be observed, but their development is not independent of the Klebanoff distortions that are caused by free-stream turbulent forcing. At a higher turbulence intensity, the transition mechanism shifts to a purely bypass scenario. Unlike the pressure side, the suction surface boundary layer separates independent of the free-stream condition, be it laminar or a moderate free-stream turbulence of intensityTu~ 3%. Upstream of the separation, the amplification of the Klebanoff distortions is suppressed in the favourable pressure gradient (FPG) region. This suppression is in agreement with simulations of constant pressure gradient boundary layers. FPG is normally stabilizing with respect to bypass transition to turbulence, but is, thereby, unfavourable with respect to separation. Downstream of the FPG section, a strong adverse pressure gradient (APG) on the suction surface of the blade causes the laminar boundary layer to separate. The separation surface is modulated in the instantaneous fields of the Klebanoff distortion inside the shear layer, which consists of forward and backward jet-like perturbations. Separation is followed by breakdown to turbulence and reattachment. As the free-stream turbulence intensity is increased,Tu~ 6.5%, transitional turbulent patches are initiated, and interact with the downstream separated flow, causing local attachment. The calming effect, or delayed re-establishment of the boundary layer separation, is observed in the wake of the turbulent events.

Sign in / Sign up

Export Citation Format

Share Document